headers
Peter Hancock | 1 Nov 2010 11:34
Picon

Re: JEuclid and FOP

Hi SriKrishnan,

Recent versions of jeuclid are not compatible with fop 0.95:
examples/mathml/build.xml of 0.95 refers to a jeuclid class
net.sourceforge.jeuclid.MathBase, however this was removed from
jeuclid in revision 425:c7cae27888cf (in 2007).
The mathml support in FOP is now maintained by the JEuclid project, as
stated in the examples/mathml/README of FOP trunk.

I would recommend ugrading your version of FOP to 1.0 or even trunk
and then follow the jeuclid-fop integration instructions that should
be found  somewhere at either
http://jeuclid.sourceforge.net/
or
http://sourceforge.net/projects/jeuclid/

If you really need to use 0.95 (although I certainly recommend
upgrading to at 1.0 or above) then you will have to figure out which
version of jeuclid is compatible and then probably  build it from the
source.  Shout out if this is your only practical solution and I can
help you out further.

Pete

On Sun, Oct 31, 2010 at 8:44 AM, SriKrishnan <srikrishnan <at> techset.co.uk> wrote:
> Hi all,
>
>
>
> Can anybody provide me a step-by-step installation procedure document of
(Continue reading)

Permalink | Reply | 9 comments |
headers
SriKrishnan | 1 Nov 2010 12:11
Picon
Favicon

RE: JEuclid and FOP

Hi Pete,

Thanks for aware me about the new version. Now I have downloaded fop 1.0.
Even in that I am not able to fix Mathml option.

FYI: as per I mentioned in my mail "readme.fop" file which available inside
the “jeuclid-3.1.9-distribution.zip”, itself they mentioned that both the
jar files are copied into fop 0.95 version.

Can you please help me to fix this problem either in fop 1.0 or fop 0.95?

Thanks,
Srikrishnan

-----Original Message-----
From: Peter Hancock [mailto:peter.hancock <at> gmail.com] 
Sent: Monday, November 01, 2010 4:05 PM
To: fop-users <at> xmlgraphics.apache.org
Subject: Re: JEuclid and FOP

Hi SriKrishnan,

Recent versions of jeuclid are not compatible with fop 0.95:
examples/mathml/build.xml of 0.95 refers to a jeuclid class
net.sourceforge.jeuclid.MathBase, however this was removed from
jeuclid in revision 425:c7cae27888cf (in 2007).
The mathml support in FOP is now maintained by the JEuclid project, as
stated in the examples/mathml/README of FOP trunk.

I would recommend ugrading your version of FOP to 1.0 or even trunk
(Continue reading)

Permalink | Reply | 8 comments |
headers
mehdi houshmand | 1 Nov 2010 12:51
Picon

Re: How to load tiff images successfully in PDF

Hi SriKrishan

Could your upload all your source data i.e. the FO file (if you're
using one, if not the XSLT and XML) and the image in TIF format.
Obviously, remove any data from the FO/XML that maybe personal, but it
looks as if you may have overflown the page with the TIF file.

If you'd rather not do that, if you look in the wiki
(http://wiki.apache.org/xmlgraphics-fop/ImageSupport) you'll see that
TIF format images aren't scaled down (1:1 embedding), so it's quite
possible that you've attempted to embed an image that's larger than
the page or something of the sort.

I hope that helps

Mehdi

On 31 October 2010 07:11, SriKrishnan <srikrishnan <at> techset.co.uk> wrote:
> Hi,
>
>
>
> Thanks for your support.
>
>
>
> When I convert my fo using fop, the following warnings only appears:
>
>
>
(Continue reading)

Permalink | Reply | 8 comments |
headers
SriKrishnan | 1 Nov 2010 12:53
Picon
Favicon

RE: How to load tiff images successfully in PDF

Hi Mehdi,

Thanks for your support.

Can you guide me, how can I upload my fo, xsl, xml and images to you? Is
there any option in "fop-users" or I can email straightaway to you?

Thanks for your patience with me

Thanks,
Srikrishnan

-----Original Message-----
From: mehdi houshmand [mailto:med1985 <at> gmail.com] 
Sent: Monday, November 01, 2010 5:21 PM
To: fop-users <at> xmlgraphics.apache.org
Subject: Re: How to load tiff images successfully in PDF

Hi SriKrishan

Could your upload all your source data i.e. the FO file (if you're
using one, if not the XSLT and XML) and the image in TIF format.
Obviously, remove any data from the FO/XML that maybe personal, but it
looks as if you may have overflown the page with the TIF file.

If you'd rather not do that, if you look in the wiki
(http://wiki.apache.org/xmlgraphics-fop/ImageSupport) you'll see that
TIF format images aren't scaled down (1:1 embedding), so it's quite
possible that you've attempted to embed an image that's larger than
the page or something of the sort.
(Continue reading)

Permalink | Reply | 7 comments |
headers
mehdi houshmand | 1 Nov 2010 13:07
Picon

Re: How to load tiff images successfully in PDF

Just attach them to an email, then everyone will be able to see them.
Do make sure you remove any personal material from them, just in case.

Thanks

Mehdi

On 1 November 2010 11:53, SriKrishnan <srikrishnan <at> techset.co.uk> wrote:
> Hi Mehdi,
>
> Thanks for your support.
>
> Can you guide me, how can I upload my fo, xsl, xml and images to you? Is
> there any option in "fop-users" or I can email straightaway to you?
>
> Thanks for your patience with me
>
> Thanks,
> Srikrishnan
>
> -----Original Message-----
> From: mehdi houshmand [mailto:med1985 <at> gmail.com]
> Sent: Monday, November 01, 2010 5:21 PM
> To: fop-users <at> xmlgraphics.apache.org
> Subject: Re: How to load tiff images successfully in PDF
>
> Hi SriKrishan
>
> Could your upload all your source data i.e. the FO file (if you're
> using one, if not the XSLT and XML) and the image in TIF format.
(Continue reading)

Permalink | Reply | 6 comments |
headers
Peter Hancock | 1 Nov 2010 13:20
Picon

Re: JEuclid and FOP

Hi Srikrishnan,

I have had success creating a pdf from the mathml.fo input found with
the 0.95 source code using FOP 1.0.
All I did to do was place jeuclid-core-3.1.9.jar and
jeuclid-fop-3.1.9.jar in FOP's lib directory as instructed.

I am not a windows user and so there may be an environmental reason
you are not have success but I do not think that is likely.

Maybe you could elaborate further on your setup and environment,
giving myself or perhaps another user more insight into your problem.

Pete

On Mon, Nov 1, 2010 at 11:11 AM, SriKrishnan <srikrishnan <at> techset.co.uk> wrote:
> Hi Pete,
>
> Thanks for aware me about the new version. Now I have downloaded fop 1.0.
> Even in that I am not able to fix Mathml option.
>
> FYI: as per I mentioned in my mail "readme.fop" file which available inside
> the “jeuclid-3.1.9-distribution.zip”, itself they mentioned that both the
> jar files are copied into fop 0.95 version.
>
> Can you please help me to fix this problem either in fop 1.0 or fop 0.95?
>
> Thanks,
> Srikrishnan
>
(Continue reading)

Permalink | Reply | 7 comments |
headers
SriKrishnan | 1 Nov 2010 13:07
Picon
Favicon

RE: How to load tiff images successfully in PDF

Hi Mehdi,

Here I have attached the complete set. Zip file size is 2mb. Forgive me if
such a big file size creates problem at the time of downloading at your end.

Thanks,
Srikrishnan

-----Original Message-----
From: mehdi houshmand [mailto:med1985 <at> gmail.com] 
Sent: Monday, November 01, 2010 5:38 PM
To: fop-users <at> xmlgraphics.apache.org
Subject: Re: How to load tiff images successfully in PDF

Just attach them to an email, then everyone will be able to see them.
Do make sure you remove any personal material from them, just in case.

Thanks

Mehdi

On 1 November 2010 11:53, SriKrishnan <srikrishnan <at> techset.co.uk> wrote:
> Hi Mehdi,
>
> Thanks for your support.
>
> Can you guide me, how can I upload my fo, xsl, xml and images to you? Is
> there any option in "fop-users" or I can email straightaway to you?
>
> Thanks for your patience with me
(Continue reading)

Permalink | Reply | 5 comments |
headers
mehdi houshmand | 1 Nov 2010 13:47
Picon

Re: How to load tiff images successfully in PDF

Hi SriKrishnan,

First of all, there are a lot of "WARNING" issues with the FO file,
you might want to check the XSL spec to find the necessary parameters
for FO elements, I'm using the trunk FOP.jar, and I've copy-pasted the
errors below. And I've attached the PDF, that it produces. The images
are being shown in TIF format, so I'm not sure where your issue comes
from. What version of FOP are you using? Are you invoking fop via the
command line?

Also does the PDF look like it is supposed to?

Thanks

Mehdi

01-Nov-2010 12:32:39 org.apache.fop.events.LoggingEventListener processEvent
WARNING: In collapsing border model a table does not have padding (see
http://www.w3.org/TR/REC-CSS2/tables.html#collapsing-borders), but a
non-zero value for padding was found. The padding will be ignored.
(See position 40:277)
01-Nov-2010 12:32:39 org.apache.fop.events.LoggingEventListener processEvent
WARNING: In collapsing border model a table does not have padding (see
http://www.w3.org/TR/REC-CSS2/tables.html#collapsing-borders), but a
non-zero value for padding was found. The padding will be ignored.
(See position 605:277)
01-Nov-2010 12:32:39 org.apache.fop.events.LoggingEventListener processEvent
WARNING: In collapsing border model a table does not have padding (see
http://www.w3.org/TR/REC-CSS2/tables.html#collapsing-borders), but a
non-zero value for padding was found. The padding will be ignored.
(Continue reading)

Permalink | Reply | 4 comments |
headers
SriKrishnan | 1 Nov 2010 13:53
Picon
Favicon

RE: How to load tiff images successfully in PDF

Hi Mehdi,

Thanks for testing my sample.

1. I am just learning to write xsl-fo. This is my first sample. There are
lot need to fix in my stylesheet.
2. I am running fop in my windows environment using MSDOS, my commandline is
as follows:
Fop lhp0008.fo lhp0008.pdf
3. So far, I am using fop-0.95 (just now I downloaded version 1.0, I need to
check in that)

Thanks a lot,
Srikrishnan

-----Original Message-----
From: mehdi houshmand [mailto:med1985 <at> gmail.com] 
Sent: Monday, November 01, 2010 6:18 PM
To: fop-users <at> xmlgraphics.apache.org
Subject: Re: How to load tiff images successfully in PDF

Hi SriKrishnan,

First of all, there are a lot of "WARNING" issues with the FO file,
you might want to check the XSL spec to find the necessary parameters
for FO elements, I'm using the trunk FOP.jar, and I've copy-pasted the
errors below. And I've attached the PDF, that it produces. The images
are being shown in TIF format, so I'm not sure where your issue comes
from. What version of FOP are you using? Are you invoking fop via the
command line?
(Continue reading)

Permalink | Reply | 3 comments |
headers
mehdi houshmand | 1 Nov 2010 14:47
Picon

Re: How to load tiff images successfully in PDF

Hi SriKrishnan,

Ok, well the XSL spec can be found here:
http://www.w3.org/TR/2001/REC-xsl-20011015/

It may help you figure out some of those error messages, as for your
TIF issue, does the PDF I attached to my last email display the
document as expected?

Thanks

Mehdi

On 1 November 2010 12:53, SriKrishnan <srikrishnan <at> techset.co.uk> wrote:
> Hi Mehdi,
>
> Thanks for testing my sample.
>
> 1. I am just learning to write xsl-fo. This is my first sample. There are
> lot need to fix in my stylesheet.
> 2. I am running fop in my windows environment using MSDOS, my commandline is
> as follows:
> Fop lhp0008.fo lhp0008.pdf
> 3. So far, I am using fop-0.95 (just now I downloaded version 1.0, I need to
> check in that)
>
> Thanks a lot,
> Srikrishnan
>
>
(Continue reading)

Permalink | Reply | 0 comments |

Gmane