headers
Jan Schmidt | 1 Jul 2005 03:19
Favicon

RE: David Elliott's old car

The ones I have seen on ebaymotors go for about $25 , if they are in
good shape. Not some aftermarket crap , like the one I bought a while
back.
Bill Schmidt (hoarder of Invader parts)

>>> ronald.m.madurski@... 06/30/05 8:36 AM >>>
If it were me I'd probably say $15 including shipping.  But I tend to
sell parts like that pretty cheap.

Ron Madurski
Lockheed Martin Technology Services
Systems Engineering Manager
304 333 5575

> -----Original Message-----
> From: f500-bounces+ronald.m.madurski=lmco.com@... [mailto:f500-
> bounces+ronald.m.madurski=lmco.com@...] On Behalf Of fmod
> Sent: Wednesday, June 29, 2005 8:32 PM
> To: f500@...
> Subject: Re: [F500] David Elliott's old car
> 
> I have a Kawasaki pull starter assembly!  Could some one tell me what
a
> fair
> price is for a good used one!
> 
> Bob Jordan
> fmod15@...
> 
>
(Continue reading)

Permalink | Reply | 0 comments |
headers
Gary Spadin | 1 Jul 2005 14:54
Picon
Favicon

Rubber Sheet Stock - Any Leads

I am looking for rubber sheet stock to make shock rubbers.  Does anyone know 
of a manufacturer or distributer that will sell rubber sheet stock in 
specific durometers?

Gary Spadin
Raptor #22 - CIL
Permalink | Reply | 5 comments |
headers
Jeff Blumenthal | 1 Jul 2005 16:11

Re: Rubber Sheet Stock - Any Leads

I bought a 12" x 12" rubber sheet from McMaster-Carr.  Link is below:

http://www.mcmaster.com/

The part number is 866K63.  Cost was $29.43
The service from McMaster-Carr has always been great and shipping is fast!
-Jeff Blumenthal

Gary Spadin wrote:

> I am looking for rubber sheet stock to make shock rubbers.  Does 
> anyone know of a manufacturer or distributer that will sell rubber 
> sheet stock in specific durometers?
>
> Gary Spadin
> Raptor #22 - CIL
> _______________________________________________
> F500 mailing list - F500@...
> To unsubscribe or change options please visit:
> http://f500.org/mailman/listinfo/f500
> *** Please, DO NOT send unsubscribe requests to the mailing list! ***
>
Permalink | Reply | 0 comments |
headers
Jeff Blumenthal | 1 Jul 2005 16:25

Re: Rubber Sheet Stock - Any Leads

OOPS....when I sent the reply I gave the wrong part# for the rubber 
sheets at McMaster-Carr.
The correct p/n is #8633K63
-Jeff

Gary Spadin wrote:

> I am looking for rubber sheet stock to make shock rubbers.  Does 
> anyone know of a manufacturer or distributer that will sell rubber 
> sheet stock in specific durometers?
>
> Gary Spadin
> Raptor #22 - CIL
> _______________________________________________
> F500 mailing list - F500@...
> To unsubscribe or change options please visit:
> http://f500.org/mailman/listinfo/f500
> *** Please, DO NOT send unsubscribe requests to the mailing list! ***
>
Permalink | Reply | 0 comments |
headers
dtm | 1 Jul 2005 16:27
Picon

Re: Rubber Sheet Stock - Any Leads

here ya go!!!!

dan hester / waterford mi

Exotic Rubber & Plastics Corp.

34700 Grand River

Farmington, MI 48332

PHONE: 810-477-2122

FAX: 810-477-0427

----- Original Message ----- 
From: "Gary Spadin" <spadigl@...>
To: <f500@...>
Sent: Friday, July 01, 2005 8:54 AM
Subject: [F500] Rubber Sheet Stock - Any Leads

>I am looking for rubber sheet stock to make shock rubbers.  Does anyone 
>know of a manufacturer or distributer that will sell rubber sheet stock in 
>specific durometers?
>
> Gary Spadin
> Raptor #22 - CIL
> _______________________________________________
> F500 mailing list - F500@...
> To unsubscribe or change options please visit:
> http://f500.org/mailman/listinfo/f500
(Continue reading)

Permalink | Reply | 0 comments |
headers
Sheldon Lemoine | 1 Jul 2005 18:27
Picon
Favicon

Re: Rubber Sheet Stock - Any Leads

http://www.mcmaster.com/

----- Original Message -----
From: Gary Spadin <spadigl@...>
Date: Friday, July 1, 2005 5:54 am
Subject: [F500] Rubber Sheet Stock - Any Leads

> I am looking for rubber sheet stock to make shock rubbers.  Does 
> anyone know 
> of a manufacturer or distributer that will sell rubber sheet stock 
> in 
> specific durometers?
> 
> Gary Spadin
> Raptor #22 - CIL
> _______________________________________________
> F500 mailing list - F500@...
> To unsubscribe or change options please visit:
> http://f500.org/mailman/listinfo/f500
> *** Please, DO NOT send unsubscribe requests to the mailing list! ***
>
Permalink | Reply | 0 comments |
headers
Jay Novak | 1 Jul 2005 21:11
Picon

RE: Rubber Sheet Stock - Any Leads

Just a heads up.  I have spent the last year making & testing elastomers
for use in F500 as springs.  I now have a supply that can be used by
many cars.

If anyone is interested they can e-mail me off the forum.

Thanks ... Jay Novak

-----Original Message-----
From: f500-bounces+jnovak6=wideopenwest.com@...
[mailto:f500-bounces+jnovak6=wideopenwest.com@...] On Behalf Of
Gary Spadin
Sent: Friday, July 01, 2005 8:54 AM
To: f500@...
Subject: [F500] Rubber Sheet Stock - Any Leads

I am looking for rubber sheet stock to make shock rubbers.  Does anyone
know 
of a manufacturer or distributer that will sell rubber sheet stock in 
specific durometers?

Gary Spadin
Raptor #22 - CIL
_______________________________________________
F500 mailing list - F500@...
To unsubscribe or change options please visit:
http://f500.org/mailman/listinfo/f500
*** Please, DO NOT send unsubscribe requests to the mailing list! ***
(Continue reading)

Permalink | Reply | 0 comments |
headers
Dillon Pyron | 1 Jul 2005 22:15
Picon

Link for article

Here's the link for the USGP article

http://tinyurl.com/8oa64

Dillon Pyron, CISSP
Support Corgi Rescue   http://www.corgiaid.org

We should cherish our friends as the rarest of jewels.  -  J. R. Miller
Permalink | Reply | 0 comments |
headers
Gil Osenburg | 2 Jul 2005 01:16
Picon

Re: Rubber Sheet Stock - Any Leads

Gary,

  We used drain plugs ordered out of the McMaster catalog - there were 
different durometers due to the fact that some were used to keep acids and 
solvents in tanks - all were 1x2's which worked out ok !

Tell Big Al I said hi !

Gil
----- Original Message ----- 
From: "Gary Spadin" <spadigl@...>
To: <f500@...>
Sent: Friday, July 01, 2005 8:54 AM
Subject: [F500] Rubber Sheet Stock - Any Leads

>I am looking for rubber sheet stock to make shock rubbers.  Does anyone 
>know of a manufacturer or distributer that will sell rubber sheet stock in 
>specific durometers?
>
> Gary Spadin
> Raptor #22 - CIL
> _______________________________________________
> F500 mailing list - F500@...
> To unsubscribe or change options please visit:
> http://f500.org/mailman/listinfo/f500
> *** Please, DO NOT send unsubscribe requests to the mailing list! ***
>
Permalink | Reply | 0 comments |
headers
Jan Schmidt | 1 Jul 2005 03:19
Favicon

RE: David Elliott's old car

The ones I have seen on ebaymotors go for about $25 , if they are in
good shape. Not some aftermarket crap , like the one I bought a while
back.
Bill Schmidt (hoarder of Invader parts)

>>> ronald.m.madurski@... 06/30/05 8:36 AM >>>
If it were me I'd probably say $15 including shipping.  But I tend to
sell parts like that pretty cheap.

Ron Madurski
Lockheed Martin Technology Services
Systems Engineering Manager
304 333 5575

> -----Original Message-----
> From: f500-bounces+ronald.m.madurski=lmco.com@... [mailto:f500-
> bounces+ronald.m.madurski=lmco.com@...] On Behalf Of fmod
> Sent: Wednesday, June 29, 2005 8:32 PM
> To: f500@...
> Subject: Re: [F500] David Elliott's old car
> 
> I have a Kawasaki pull starter assembly!  Could some one tell me what
a
> fair
> price is for a good used one!
> 
> Bob Jordan
> fmod15@...
> 
>
(Continue reading)

Permalink | Reply | 7 comments |

Gmane