N V | 1 Feb 09:19 2012
Picon

Re: USB Memory Stick and DVD not mounted

Hi.

I don't have an idea about solving this. But there were some issues, afair, about renaming cd/dvd devices in
in the 9 branch. And it could be a usefull hint for the developers. Possibly, that's not related.

Regards,
Vans.

01.02.2012, 01:16, "Sven Moeller" <smoeller@...>:
> Hi,
>
> on a freshly installed PC-BSD 9.0 (using KDE) a 8GB USB Memory Stick
> won't be mounted automatically. The device doesn't show up in Dolphin
> nor in the Device Notifier of KDE. dmesg shows that the kernel has
> recognized the device at all. Maybe it's an HALD issue? How can i try to
> track this down?
>
> A data DVD (udf filesystem, Win7 install media) couldn't be mounted
> because of an error like "freedesktop.org HAL error invalid argument
> /dev/cd0". I guess this is an error by HALD or mount_udf? I tested this
> in KDE and XFCE. In both i got same results. Maybe some has an idea to
> solve this?
>
> Sven
> _______________________________________________
> Testing mailing list
> Testing@...
> http://lists.pcbsd.org/mailman/listinfo/testing
GO. | 3 Feb 18:02 2012
Picon

Re: path to post-install.sh in automated installation 9Release

Trying different ways to start external script, no success:

Warning: Component .... doesnt seem to exist (but is in $CDMNT)
Warning: Component .....pbi doesnt seem to exist (same with .pbi but is in $CDMNT)
fetch: post-install.sh : open() Operation not supported
Running external command: sh ${CDMNT}/post-install.sh
No such file or Directory (but is on CD root)
Running external command: sh post-install.sh
cannot open post-install.sh
No such file or directory

Any hints to get it done?

Am 17.01.2012 um 17:44 schrieb Kris Moore:

> Oh, the post-install.sh is on the CD? try ${CDMNT}/boot/post-install.sh
> or whatever the path is to post-install.sh then.
> 
> runExtCommand=sh ${CDMNT}/boot/post-install.sh
> 
> 
> -- 
> Kris Moore
> PC-BSD Software
> iXsystems
> 
> _______________________________________________
> Testing mailing list
> Testing@...
> http://lists.pcbsd.org/mailman/listinfo/testing
(Continue reading)

Jeff | 5 Feb 18:40 2012
Picon

Export Warden or Tar?

Before I upgrade from 8.1 to 9, I need to save four jails.

Last time I did this I just exported them from the Warden to a .wdn file

Is it better/easier to just tar the directory and untar it in the upgraded system, or continue to use .wdn files?

I remember that creating a .wdn file takes hours and I end up with a file about 450 MB.

_______________________________________________
Testing mailing list
Testing@...
http://lists.pcbsd.org/mailman/listinfo/testing
Daniel Byrnes | 6 Feb 02:45 2012
Picon

Support for Dell ST2220T Touchscreen

Hi,

I have just installed isotope 9.0 with a Dell ST2220T USB touchscreen connected. During install the
touchscreen is not identified.

Does anyone have any suggestion on how I can get this touchscreen working. The output from usbconfig and
xorg.conf is below.

Cheers
Dan

[root <at> Stoat] ~# usbconfig
ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen1.1: <OHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen2.1: <OHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen3.1: <OHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen5.1: <EHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen2.2: <Microsoft Basic Optical Mouse v2.0 Microsoft> at usbus2, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
ugen5.4: <USB 2.0 Reader Generic> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen5.2: <product 0x2514 vendor 0x0424> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen5.3: <LGD-MultiTouch LG Display> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON

The xorg.conf is
# Xorg.conf file generated for PC-BSD

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Panel0"
InputDevice "Panel1"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Clone" "off"
EndSection

Section "ServerFlags"
Option "AutoAddDevices" "Off"
EndSection

Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/cyrillic/"
FontPath "/usr/local/lib/X11/fonts/TrueType/"
FontPath "/usr/local/lib/X11/fonts/illinoy/"
FontPath "/usr/local/lib/X11/fonts/webfonts/"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/OTF/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/Speedo/"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/CID/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/dejavu/"
FontPath "/usr/local/lib/X11/fonts/bitstream-vera/"
FontPath "/usr/local/lib/X11/fonts/cyrillic/"
FontPath "/usr/local/lib/X11/fonts/hebrew/"
FontPath "/usr/local/lib/X11/fonts/vietnamese/"
FontPath "/usr/local/lib/X11/fonts/indic/"
FontPath "/usr/local/lib/X11/fonts/fonts-indic/"
FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AAHS"
FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AGA"
FontPath "/usr/local/lib/X11/fonts/ae_fonts1/FS"
FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Kasr"
FontPath "/usr/local/lib/X11/fonts/ae_fonts1/MCS"
FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Shmookh"
FontPath "/usr/local/lib/X11/fonts/local/"
FontPath "/usr/local/lib/X11/fonts/util/"
EndSection

Section "Module"
Load "ddc"
Load "dbe"
# Load "dri"
Load "extmod"
# Load "glx"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "6"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
Identifier "Card0"
Screen 0
Driver "ati"
VendorName "ATI Video Driver"
Option "CPPIOMode" "yes"
Option "DynamicPM" "on"
BusID "PCI:1:5:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection

Section "InputDevice"
Identifier "Panel0"
Driver "mouse"
Option "Protocol" "usb"
Option "Device" "/dev/uhid0"
EndSection

Section "InputDevice"
Identifier "Panel1"
Driver "mouse"
Option "Protocol" "usb"
Option "Device" "/dev/uhid0"
EndSection 

Cheers
Dan Byrnes
nr10232 | 6 Feb 10:15 2012
Picon

Re: PC-BSD Testing] Warden is not working properly

I reinstalled it two times, i tried use warden from ports - without success.
I even modyfied wardenrc script ( i copied part of init-warden.sh and pasted it before original script) -
after that warden jails started (i had access to www serwer on it), but warden gui was showing that jails was
not running).

Regards,
krzysiek

W dniu 2012-01-30 21:23:03 użytkownik Dru Lavigne <dru.lavigne <at> att.net> napisał:
> 
> > I use 64-bit from KDE too.
> > I have message before i even try to login and after
> > logout:
> > 
> > Clearing /tmp
> > PROGIR unset! Is The Warden installed prolerly?
> > WARNING: attempt to domain_add(bluetooth) after
> > domainfinalize()
> 
> 
> Have you tried uninstalling and reinstalling on the off-chance that there was a problem with the
installation? Are you on 9.0-RELEASE?
> 
> Cheers,
> 
> Dru
> _______________________________________________
> Testing mailing list
> Testing <at> lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
> 

_______________________________________________
Testing mailing list
Testing <at> lists.pcbsd.org
http://lists.pcbsd.org/mailman/listinfo/testing
N V | 6 Feb 10:41 2012
Picon

Re: Support for Dell ST2220T Touchscreen

Hi.

I have no this device, but was looking towards getting it. But had no chance to test it with FreeBSD / PC-BSD
yet. So, watching you making it work. ;)

If I have any suggestions, will write. :)

Regards,
Vans.

06.02.2012, 05:45, "Daniel Byrnes" <mrdbyrnes@...>:
> Hi,
>
> I have just installed isotope 9.0 with a Dell ST2220T USB touchscreen connected. During install the
touchscreen is not identified.
>
> Does anyone have any suggestion on how I can get this touchscreen working. The output from usbconfig and
xorg.conf is below.
>
> Cheers
> Dan
>
> [root <at> Stoat] ~# usbconfig
> ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
> ugen1.1: <OHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
> ugen2.1: <OHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
> ugen3.1: <OHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
> ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
> ugen5.1: <EHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
> ugen2.2: <Microsoft Basic Optical Mouse v2.0 Microsoft> at usbus2, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
> ugen5.4: <USB 2.0 Reader Generic> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
> ugen5.2: <product 0x2514 vendor 0x0424> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
> ugen5.3: <LGD-MultiTouch LG Display> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
>
> The xorg.conf is
> # Xorg.conf file generated for PC-BSD
>
> Section "ServerLayout"
> Identifier "XFree86 Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Panel0"
> InputDevice "Panel1"
> InputDevice "Keyboard0" "CoreKeyboard"
> Option "Clone" "off"
> EndSection
>
> Section "ServerFlags"
> Option "AutoAddDevices" "Off"
> EndSection
>
> Section "Files"
> ModulePath "/usr/local/lib/xorg/modules"
> FontPath "/usr/local/lib/X11/fonts/cyrillic/"
> FontPath "/usr/local/lib/X11/fonts/TrueType/"
> FontPath "/usr/local/lib/X11/fonts/illinoy/"
> FontPath "/usr/local/lib/X11/fonts/webfonts/"
> FontPath "/usr/local/lib/X11/fonts/misc/"
> FontPath "/usr/local/lib/X11/fonts/OTF/"
> FontPath "/usr/local/lib/X11/fonts/TTF/"
> FontPath "/usr/local/lib/X11/fonts/Speedo/"
> FontPath "/usr/local/lib/X11/fonts/Type1/"
> FontPath "/usr/local/lib/X11/fonts/CID/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/"
> FontPath "/usr/local/lib/X11/fonts/100dpi/"
> FontPath "/usr/local/lib/X11/fonts/dejavu/"
> FontPath "/usr/local/lib/X11/fonts/bitstream-vera/"
> FontPath "/usr/local/lib/X11/fonts/cyrillic/"
> FontPath "/usr/local/lib/X11/fonts/hebrew/"
> FontPath "/usr/local/lib/X11/fonts/vietnamese/"
> FontPath "/usr/local/lib/X11/fonts/indic/"
> FontPath "/usr/local/lib/X11/fonts/fonts-indic/"
> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AAHS"
> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AGA"
> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/FS"
> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Kasr"
> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/MCS"
> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Shmookh"
> FontPath "/usr/local/lib/X11/fonts/local/"
> FontPath "/usr/local/lib/X11/fonts/util/"
> EndSection
>
> Section "Module"
> Load "ddc"
> Load "dbe"
> # Load "dri"
> Load "extmod"
> # Load "glx"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "keyboard"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
> Option "XkbVariant" ""
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
> Option "Buttons" "6"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> Section "Device"
> Identifier "Card0"
> Screen 0
> Driver "ati"
> VendorName "ATI Video Driver"
> Option "CPPIOMode" "yes"
> Option "DynamicPM" "on"
> BusID "PCI:1:5:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1920x1080"
> EndSubSection
> EndSection
>
> Section "InputDevice"
> Identifier "Panel0"
> Driver "mouse"
> Option "Protocol" "usb"
> Option "Device" "/dev/uhid0"
> EndSection
>
> Section "InputDevice"
> Identifier "Panel1"
> Driver "mouse"
> Option "Protocol" "usb"
> Option "Device" "/dev/uhid0"
> EndSection
>
> Cheers
> Dan Byrnes
> _______________________________________________
> Testing mailing list
> Testing@...
> http://lists.pcbsd.org/mailman/listinfo/testing
Odhiambo Washington | 6 Feb 13:08 2012
Picon

Re: Support for Dell ST2220T Touchscreen



On Mon, Feb 6, 2012 at 04:45, Daniel Byrnes <mrdbyrnes-sFbbPxZDHXw0n/F98K4Iww@public.gmane.org> wrote:
Hi,

I have just installed isotope 9.0 with a Dell ST2220T USB touchscreen connected. During install the touchscreen is not identified.

Does anyone have any suggestion on how I can get this touchscreen working. The output from usbconfig and xorg.conf is below.



I did not hear as yet if FreeBSD has drivers for Touchpanels/screens. Maybe I have just been asleep and missed that discussion.



--
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
I can't hear you -- I'm using the scrambler.
Please consider the environment before printing this email.

_______________________________________________
Testing mailing list
Testing@...
http://lists.pcbsd.org/mailman/listinfo/testing
Arthur | 6 Feb 13:31 2012

Re: Support for Dell ST2220T Touchscreen

On 02/06/2012 6:08 AM, Odhiambo Washington wrote:


On Mon, Feb 6, 2012 at 04:45, Daniel Byrnes <mrdbyrnes-sFbbPxZDHXw0n/F98K4Iww@public.gmane.org> wrote:
Hi,

I have just installed isotope 9.0 with a Dell ST2220T USB touchscreen connected. During install the touchscreen is not identified.

Does anyone have any suggestion on how I can get this touchscreen working. The output from usbconfig and xorg.conf is below.



I did not hear as yet if FreeBSD has drivers for Touchpanels/screens. Maybe I have just been asleep and missed that discussion.



Yes, I vaguely remember that the support for touch stuff comes in later versions of x-org server. Does this ring a bell with anyone else?

Arthur
_______________________________________________
Testing mailing list
Testing@...
http://lists.pcbsd.org/mailman/listinfo/testing
GO. | 6 Feb 15:03 2012
Picon

Re: some boot screens..

Looks nice.
Testing it on some machines, but as bglogo.pcx on/boot/themes/default
it doesnt shows up.
Testing as loading-screen.pcx on a thinkpad with R9 i have to click
show splash screen after every boot. On a PC it reminds showing
splash.

where can i check on the conf file if its activated?

Marc

2012/1/30 Jay Patel <rockworldmi <at> gmail.com>:
> Hi guys,
> Kris i have made updated boot screen which works fine on PC-BSD 9.Also
> wants to know where can i find link that is working on FreeBSD 10
> animated boot screens.?
> this is link for now screen.
> http://www.4shared.com/file/rXUy-wwF/updated.html
>
> Regards,
> Jay.
> _______________________________________________
> Testing mailing list
> Testing <at> lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>

--

-- 

--
GoDot.de Server & Software Solutions
Inh. M.Maschke

Telefon   +49 30 20237662-0
Telefax   +49 30 20237662-9
eMail   info <at> godot.de
WWW  http://news.godot.de
eShop  http://shop.godot.de

P  Before you print think about the ENVIRONMENT
_______________________________________________
Testing mailing list
Testing <at> lists.pcbsd.org
http://lists.pcbsd.org/mailman/listinfo/testing
Warner Losh | 6 Feb 18:01 2012

Re: Support for Dell ST2220T Touchscreen


On Feb 6, 2012, at 5:31 AM, Arthur wrote:

On 02/06/2012 6:08 AM, Odhiambo Washington wrote:


On Mon, Feb 6, 2012 at 04:45, Daniel Byrnes <mrdbyrnes-sFbbPxZDHXw0n/F98K4Iww@public.gmane.org> wrote:
Hi,

I have just installed isotope 9.0 with a Dell ST2220T USB touchscreen connected. During install the touchscreen is not identified.

Does anyone have any suggestion on how I can get this touchscreen working. The output from usbconfig and xorg.conf is below.



I did not hear as yet if FreeBSD has drivers for Touchpanels/screens. Maybe I have just been asleep and missed that discussion.



Yes, I vaguely remember that the support for touch stuff comes in later versions of x-org server. Does this ring a bell with anyone else?

I've heard reports from several people that confirm this.  They got a new machine with a touch screen, installed X and it just worked.

Of course, there's lots of different sorts of touch screens, so your milage may vary.

Warner

_______________________________________________
Testing mailing list
Testing@...
http://lists.pcbsd.org/mailman/listinfo/testing

Gmane