Bret Busby | 2 Oct 05:42 2011
Picon

Re: [PC-BSD Announce] PC-BSD 9.0-BETA3 Available

On 02/10/2011, Kris Moore <kris@...> wrote:
>
>
> *Release Announcement*
>
> The third BETA release of the upcoming PC-BSD 9.0 is now available! This
> release includes the latest FreeBSD 9.0-BETA3 base, along with numerous bug
> fixes and enhancements.
>
> *Download*
>
> http://www.pcbsd.org/get-it/download-pc-bsd-isotope#isotope
>
> *Changelog*
>
> Notable changes in this release: (In no particular order)
>
> * Fix issue enabling flash plugin after installation
> * Fix bug with handbook not launching in LXDE
> * Fix issue performing updates on ZFS systems with separate /boot UFS
> partition.

I have just looked on the PC-BSD web site, in various parts, including
http://wiki.pcbsd.org/index.php/Main_Page
http://wiki.pcbsd.org/index.php/PC-BSD_Users_Handbook
http://wiki.pcbsd.org/index.php/PC-BSD_FAQS
http://wiki.pcbsd.org/index.php/PC-BSD_9_Handbook
http://wiki.pcbsd.org/index.php/Files_and_File_Sharing

and I could not easily find a list of the file systems types that are
(Continue reading)

Dru Lavigne | 2 Oct 21:41 2011
Picon
Picon

Re: PC-BSD 9.0-BETA3 > Available


> Date: Sun, 2 Oct 2011 11:42:29 +0800
> From: Bret Busby <bret.busby@...>
> To: PC-BSD mailing list <support@...>
> Subject: Re: [PC-BSD Support] [PC-BSD Announce] PC-BSD
> 9.0-BETA3
>     Available

> 
> I have just looked on the PC-BSD web site, in various
> parts, including
> http://wiki.pcbsd.org/index.php/Main_Page
> http://wiki.pcbsd.org/index.php/PC-BSD_Users_Handbook
> http://wiki.pcbsd.org/index.php/PC-BSD_FAQS
> http://wiki.pcbsd.org/index.php/PC-BSD_9_Handbook
> http://wiki.pcbsd.org/index.php/Files_and_File_Sharing
> 
> and I could not easily find a list of the file systems
> types that are
> to be supported by PC-BSD 9, or, the extent of support for
> each file
> system type that is to be supported (eg, fs2 - read/write,
> NTFS  -
> read/write, FAT64 (if it exists yet) - read only, etc)
> 
> Does such documentation exist within the PC-BSD
> documentation for
> PC-BSD 9, and, if so, where might it easily be found?
> 
> Whilst such documentation may not be regarded as part of
(Continue reading)

newbie2pb | 27 Oct 15:01 2011

nvidia support for pcbsd

Hi all,
    I am new to pcbsd. I only have knowledge of windows. Before installing pcbsd, I want to ask a qustion. My graphics card is " NVIDIA GeForce GT 240M ", is it possible to install drivers from www.nvidia.com?  which only prepared drivers for freebsd.
Regards,
newbie2pb


网易公开课推出哈佛最受欢迎《幸福》课程,帮您修满幸福学分!
_______________________________________________
Support mailing list
Support@...
http://lists.pcbsd.org/mailman/listinfo/support
newbie2pb | 27 Oct 15:43 2011

nvidia support for pcbsd

Hi all,
    I am new to pcbsd. I only have knowledge of windows. Before installing pcbsd, I want to ask a qustion. My graphics card is " NVIDIA GeForce GT 240M ", is it possible to install drivers from www.nvidia.com?  which only prepared drivers for freebsd.
Regards,
newbie2pb





网易公开课推出哈佛最受欢迎《幸福》课程,帮您修满幸福学分!
_______________________________________________
Support mailing list
Support@...
http://lists.pcbsd.org/mailman/listinfo/support
Martes Wigglesworth | 28 Oct 19:48 2011
Picon

Can't set environmental variables that are in .profile


Greetings list.

I have been working on trying to get my Java_HOME variable set using 
/etc/profile, and it seems that that variables are ignored when put into 
/etc/profile or ~/.profile

Where should I set these variables for use by developers working on the 
system?

(I have been using linux too long, and have gotten used to plopping some 
executable script into /etc/profile.d . )

--

-- 
Respectfully,

Martes G Wigglesworth
Dru Lavigne | 28 Oct 22:10 2011
Picon
Picon

Re: Can't set environmental variables that are in .profile


> Date: Fri, 28 Oct 2011 13:48:36 -0400
> From: "Martes Wigglesworth" <mailinglistmember@...>
> To: PC-BSD mailing list <support@...>
> Subject: [PC-BSD Support] Can't set environmental variables
> that are
>     in    .profile
> Message-ID: <4EAAEAF4.7080402@...>
> Content-Type: text/plain; charset=ISO-8859-1;
> format=flowed
> 
> 
> Greetings list.
> 
> I have been working on trying to get my Java_HOME variable
> set using 
> /etc/profile, and it seems that that variables are ignored
> when put into 
> /etc/profile or ~/.profile
> 
> Where should I set these variables for use by developers
> working on the 
> system?
> 
> (I have been using linux too long, and have gotten used to
> plopping some 
> executable script into /etc/profile.d . )

It depends upon the shell (type "env" to find out the current shell). If it is not reading .profile, it sounds
like the shell is csh/tcsh, meaning that the setting would go into .cshrc.

http://en.wikipedia.org/wiki/Unix_shell#Configuration_files_for_shells

Cheers,

Dru
Dru Lavigne | 28 Oct 22:18 2011
Picon
Picon

Re: nvidia support for pcbsd


> Date: Thu, 27 Oct 2011 21:01:13 +0800 (CST)
> From: newbie2pb <15216712071@...>
> To: support@...
> Subject: [PC-BSD Support] nvidia support for pcbsd
> Message-ID: <5214b1.8b77.1334578541d.Coremail.15216712071@...>
> Content-Type: text/plain; charset="gbk"
> 
> Hi all,
>     I am new to pcbsd. I only have knowledge of
> windows. Before installing pcbsd, I want to ask a qustion.
> My graphics card is " NVIDIA GeForce GT 240M ", is it
> possible to install drivers from www.nvidia.com?  which
> only prepared drivers for freebsd.

NVIDIA is actually the best supported video card for PC-BSD and the installation should automatically
detect and configure the card using the latest drivers (no download required). Your particular card is
listed on the NVIDIA website as supported: http://www.nvidia.com/object/freebsd-x86-285.05.09-driver.html

Cheers,

Dru
Martes G Wigglesworth | 29 Oct 03:31 2011
Picon

Re: Can't set environmental variables that are in .profile


Thanks so much for that clarification.

That was the only thing that I could think of, and have started to edit 
my system's .cshrc appropriately.

--

-- 
Respectfully,

Martes G Wigglesworth
M. G. Wigglesworth Holdings, LLC
www.mgwigglesworth.net
Michael D. Norwick | 29 Oct 17:15 2011
Picon
Picon

New PC BSD Isotope install

Good Day,

I am currently trying to clean up a new installation of PC BSD 9 on a 
Dell Latitude D630 laptop.

$uname -a
FreeBSD ****.****.net 9.0-RC1 FreeBSD 9.0-RC1 #3: Tue Oct 18 09:59:23 
PDT 2011    

root@...:/usr/obj/pcbsd-build90/fbsd-source/9.0/sys/GENERIC

amd64

I seem to have an issue configuring peripherals such as usb sticks and 
the DVD-Rom drive in this machine.  I installed from the x64 DVD 
downloaded 10/27/2011.

$tail /var/log/messages
Oct 29 09:17:34 bucksnort amountd: CREATE da0
Oct 29 09:23:49 bucksnort sudo:  michael : TTY=pts/1 ; PWD=/dev ; 
USER=root ; COMMAND=/sbin/mount /dev/da0
Oct 29 09:24:17 bucksnort sudo:  michael : TTY=pts/1 ; PWD=/dev ; 
USER=root ; COMMAND=/sbin/mount -t ufs /dev/ado /media/usb0
Oct 29 09:24:31 bucksnort sudo:  michael : TTY=pts/1 ; PWD=/dev ; 
USER=root ; COMMAND=/sbin/mount -t ufs /dev/da0 /media/usb0
Oct 29 09:24:31 bucksnort kernel: WARNING: /media/usb0: GJOURNAL flag on 
fs but no gjournal provider below

from trying to mount a usb flashdrive formatted UFS.

$>dmesg
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
     The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RC1 #3: Tue Oct 18 09:59:23 PDT 2011

root@...:/usr/obj/pcbsd-build90/fbsd-source/9.0/sys/GENERIC 
amd64
CPU: Intel(R) Core(TM)2 Duo CPU     T7250   <at>  2.00GHz (1994.47-MHz 
K8-class CPU)
   Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant, performance statistics
real memory  = 1073741824 (1024 MB)
avail memory = 997691392 (951 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL   M08 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL M08 > on motherboard
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, 3f55b800 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xefe8-0xefef mem 
0xfea00000-0xfeafffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
vgapci1: <VGA-compatible display> mem 0xfeb00000-0xfebfffff at device 
2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 
20 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 
21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 
0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem 
0xfe9fc000-0xfe9fffff irq 21 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib2
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xfe8ff000-0xfe8fffff irq 17 
at device 0.0 on pci12
pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 
0x00a002> mem 0xfe7f0000-0xfe7fffff irq 17 at device 0.0 on pci9
bge0: CHIP ID 0x0000a002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5755 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:21:70:91:6a:a5
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 
20 at device 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 
21 at device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 
22 at device 29.2 on pci0
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 
0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib4
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 
0xfe6ff000-0xfe6fffff,0xfe6fe800-0xfe6fefff irq 19 at device 1.4 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 36:4f:c0:00:38:ad:b1:c1
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 36:4f:c0:00:38:ad:b1:c1  <at>  0xfffe00000000, S400, 
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x3d824000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 36:4f:c0:ad:b1:c1
fwe0: Ethernet address: 36:4f:c0:ad:b1:c1
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, 
CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 
on pci0
ata0: <ATA channel 0> on atapci0
atapci1: <Intel ICH8M SATA300 controller> port 
0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xeff0-0xefff 
irq 17 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on 
acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 2 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is 
present;
             to enable, add "vfs.zfs.prefetch_disable=0" to 
/boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: Sigmatel STAC9205X
hdac0: HDA Codec #1: Conexant (Unknown)
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
pcm0: <HDA Sigmatel STAC9205X PCM #0 Analog> at cad 0 nid 1 on hdac0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <ST980813ASG 3.ADD> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-L632H D300> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present 
- tray closed
ugen4.2: <Logitech> at usbus4
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on 
usbus4
ums0: 3 buttons and [XYZ] coordinates ID=0
Enter passphrase for ada0s1f: ugen5.2: <vendor 0x0b97> at usbus5
uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> 
on usbus5
uhub7: 4 ports with 3 removable, self powered
ugen5.3: <O2> at usbus5
***********
GEOM_ELI: Wrong key for ada0s1f. Tries left: 2.
Enter passphrase for ada0s1f: **********
GEOM_ELI: Device ada0s1f.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
Trying to mount root from ufs:/dev/label/rootfs0 [rw,noatime]...
Cuse4BSD v0.1.21  <at>  /dev/cuse
wlan0: Ethernet address: 00:1f:3c:6a:05:06
wpi0: need multicast update callback
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
ugen6.2: <SanDisk> at usbus6
umass0: <SanDisk SanDisk Cruzer, class 0/0, rev 2.00/2.00, addr 2> on usbus6
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:4:0:-1: Attached to scbus4
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:3a,0 (Medium 
not present)
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <SanDisk SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 7663MB (15695871 512 byte sectors: 255H 63S/T 977C)
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: UNIT ATTENTION asc:29,0 (Power 
on, reset, or bus device reset occurred)
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not 
present)
cd1 at umass-sim0 bus 0 scbus4 target 0 lun 1
cd1: <SanDisk SanDisk Cruzer 8.02> Removable CD-ROM SCSI-0 device
cd1: 40.000MB/s transfers
cd1: cd present [49151 x 2048 byte records]
WARNING: /media/usb0: GJOURNAL flag on fs but no gjournal provider below

I chose to encrypt my home directory during the installation but I do 
not have a boot issue.
I recently have tried FreeBSD 9-beta1, FreeBSD 9-beta3 and FreeBSD 8.2 
with similar results.  I previously posted to freebsd-questions <at>  and 
freebsd-multimedia <at>  and did not get resolution.  Neither the Handbook or 
the PC BSD docs have helped me either.

I think that cam or automount does not like something in my 
configuration.  I do not see anything blatantly wrong with the 
/etc/devfs.conf or /etc/fstab.  I was finally able to get a new USB 
stick to mount reliably, yet, the DVD-ROM drive won't mount.  I do not 
like the way SanDisk configures the stick providing a CD_9660 partition 
somehow burned in.  I have yet to figure out a way to delete this and I 
hope that it doesn't affect cam, devd, or something else.

The TSST drive worked fine on Windows Vista and Debian.  Since I can 
boot from it, I think I can assume the drive is okay.  $>cdcontrol play 
1 spins an audio CD but, it won't output to the speakers.  Graphical 
programs such as KsCD don't even see the tracks.  The KDE device 
notifier sees both the CD and the USB stick but I cannot mount them from 
there.

Otherwise, this release of PC BSD works well on this particular hardware.

Thank You,
Michael
Michael D. Norwick | 30 Oct 20:31 2011
Picon
Picon

Knock-Knock_New PC BSD Isotope install

On 10/29/11 10:15, Michael D. Norwick wrote:
> Good Day,
>
> I am currently trying to clean up a new installation of PC BSD 9 on a 
> Dell Latitude D630 laptop.
>
> $uname -a
> FreeBSD ****.****.net 9.0-RC1 FreeBSD 9.0-RC1 #3: Tue Oct 18 09:59:23 
> PDT 2011     
>
root@...:/usr/obj/pcbsd-build90/fbsd-source/9.0/sys/GENERIC

> amd64
>
> I seem to have an issue configuring peripherals such as usb sticks and 
> the DVD-Rom drive in this machine.  I installed from the x64 DVD 
> downloaded 10/27/2011.
>
> $tail /var/log/messages
> Oct 29 09:17:34 bucksnort amountd: CREATE da0
> Oct 29 09:23:49 bucksnort sudo:  michael : TTY=pts/1 ; PWD=/dev ; 
> USER=root ; COMMAND=/sbin/mount /dev/da0
> Oct 29 09:24:17 bucksnort sudo:  michael : TTY=pts/1 ; PWD=/dev ; 
> USER=root ; COMMAND=/sbin/mount -t ufs /dev/ado /media/usb0
> Oct 29 09:24:31 bucksnort sudo:  michael : TTY=pts/1 ; PWD=/dev ; 
> USER=root ; COMMAND=/sbin/mount -t ufs /dev/da0 /media/usb0
> Oct 29 09:24:31 bucksnort kernel: WARNING: /media/usb0: GJOURNAL flag 
> on fs but no gjournal provider below
>
> from trying to mount a usb flashdrive formatted UFS.
>
> $>dmesg
> Copyright (c) 1992-2011 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>     The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.0-RC1 #3: Tue Oct 18 09:59:23 PDT 2011
>     
>
root@...:/usr/obj/pcbsd-build90/fbsd-source/9.0/sys/GENERIC 
> amd64
> CPU: Intel(R) Core(TM)2 Duo CPU     T7250   <at>  2.00GHz (1994.47-MHz 
> K8-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping 
> = 13
> 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> 
>
>   
> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>   AMD Features=0x20100800<SYSCALL,NX,LM>
>   AMD Features2=0x1<LAHF>
>   TSC: P-state invariant, performance statistics
> real memory  = 1073741824 (1024 MB)
> avail memory = 997691392 (951 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <DELL   M08 >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> cryptosoft0: <software crypto> on motherboard
> acpi0: <DELL M08 > on motherboard
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> acpi0: reservation of 0, 9f000 (3) failed
> acpi0: reservation of 100000, 3f55b800 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> vgapci0: <VGA-compatible display> port 0xefe8-0xefef mem 
> 0xfea00000-0xfeafffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
> agp0: <Intel GM965 SVGA controller> on vgapci0
> agp0: aperture size is 256M, detected 7676k stolen memory
> vgapci1: <VGA-compatible display> mem 0xfeb00000-0xfebfffff at device 
> 2.1 on pci0
> uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f 
> irq 20 at device 26.0 on pci0
> uhci0: LegSup = 0x2f00
> usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
> uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f 
> irq 21 at device 26.1 on pci0
> uhci1: LegSup = 0x2f00
> usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
> ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 
> 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
> usbus2: EHCI version 1.0
> usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
> hdac0: <Intel 82801H High Definition Audio Controller> mem 
> 0xfe9fc000-0xfe9fffff irq 21 at device 27.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci11: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
> pci12: <ACPI PCI bus> on pcib2
> wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xfe8ff000-0xfe8fffff irq 17 
> at device 0.0 on pci12
> pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
> pci9: <ACPI PCI bus> on pcib3
> bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 
> 0x00a002> mem 0xfe7f0000-0xfe7fffff irq 17 at device 0.0 on pci9
> bge0: CHIP ID 0x0000a002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5755 1000BASE-T media interface> PHY 1 on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
> bge0: Ethernet address: 00:21:70:91:6a:a5
> uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f 
> irq 20 at device 29.0 on pci0
> uhci2: LegSup = 0x2f00
> usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
> uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f 
> irq 21 at device 29.1 on pci0
> uhci3: LegSup = 0x2f00
> usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
> uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f 
> irq 22 at device 29.2 on pci0
> uhci4: LegSup = 0x2f00
> usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
> ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 
> 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
> usbus6: EHCI version 1.0
> usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
> pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci3: <ACPI PCI bus> on pcib4
> cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> fwohci0: <1394 Open Host Controller Interface> mem 
> 0xfe6ff000-0xfe6fffff,0xfe6fe800-0xfe6fefff irq 19 at device 1.4 on pci3
> fwohci0: OHCI version 1.10 (ROM=0)
> fwohci0: No. of Isochronous channels is 8.
> fwohci0: EUI64 36:4f:c0:00:38:ad:b1:c1
> fwohci0: Phy 1394a available S400, 1 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwip0: <IP over FireWire> on firewire0
> fwip0: Firewire address: 36:4f:c0:00:38:ad:b1:c1  <at>  0xfffe00000000, 
> S400, maxrec 2048
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> dcons_crom0: <dcons configuration ROM> on firewire0
> dcons_crom0: bus_addr 0x3d824000
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 36:4f:c0:ad:b1:c1
> fwe0: Ethernet address: 36:4f:c0:ad:b1:c1
> fwohci0: Initiate bus reset
> fwohci0: fwohci_intr_core: BUS reset
> fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, 
> CYCLEMASTER mode
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH8M UDMA100 controller> port 
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 
> 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> atapci1: <Intel ICH8M SATA300 controller> port 
> 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xeff0-0xefff 
> irq 17 at device 31.2 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> battery1: <ACPI Control Method Battery> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 
> on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model GlidePoint, device ID 0
> atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 2 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: cannot reserve I/O port range
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is 
> present;
>             to enable, add "vfs.zfs.prefetch_disable=0" to 
> /boot/loader.conf.
> ZFS filesystem version 5
> ZFS storage pool version 28
> Timecounters tick every 1.000 msec
> hdac0: HDA Codec #0: Sigmatel STAC9205X
> hdac0: HDA Codec #1: Conexant (Unknown)
> firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
> firewire0: bus manager 0
> pcm0: <HDA Sigmatel STAC9205X PCM #0 Analog> at cad 0 nid 1 on hdac0
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 480Mbps High Speed USB v2.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 12Mbps Full Speed USB v1.0
> usbus6: 480Mbps High Speed USB v2.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> ugen3.1: <Intel> at usbus3
> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1: <Intel> at usbus4
> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <Intel> at usbus5
> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> ugen6.1: <Intel> at usbus6
> uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> uhub4: 2 ports with 2 removable, self powered
> uhub5: 2 ports with 2 removable, self powered
> uhub2: 4 ports with 4 removable, self powered
> uhub6: 6 ports with 6 removable, self powered
> ada0 at ata2 bus 0 scbus2 target 0 lun 0
> ada0: <ST980813ASG 3.ADD> ATA-7 SATA 2.x device
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
> ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> SMP: AP CPU #1 Launched!
> cd0 at ata0 bus 0 scbus1 target 0 lun 0
> cd0: <TSSTcorp DVD+-RW TS-L632H D300> Removable CD-ROM SCSI-0 device
> cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not 
> present - tray closed
> ugen4.2: <Logitech> at usbus4
> ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> 
> on usbus4
> ums0: 3 buttons and [XYZ] coordinates ID=0
> Enter passphrase for ada0s1f: ugen5.2: <vendor 0x0b97> at usbus5
> uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 
> 2> on usbus5
> uhub7: 4 ports with 3 removable, self powered
> ugen5.3: <O2> at usbus5
> ***********
> GEOM_ELI: Wrong key for ada0s1f. Tries left: 2.
> Enter passphrase for ada0s1f: **********
> GEOM_ELI: Device ada0s1f.eli created.
> GEOM_ELI: Encryption: AES-XTS 128
> GEOM_ELI:     Crypto: software
> Trying to mount root from ufs:/dev/label/rootfs0 [rw,noatime]...
> Cuse4BSD v0.1.21  <at>  /dev/cuse
> wlan0: Ethernet address: 00:1f:3c:6a:05:06
> wpi0: need multicast update callback
> WARNING: attempt to domain_add(bluetooth) after domainfinalize()
> ugen6.2: <SanDisk> at usbus6
> umass0: <SanDisk SanDisk Cruzer, class 0/0, rev 2.00/2.00, addr 2> on 
> usbus6
> umass0:  SCSI over Bulk-Only; quirks = 0x4000
> umass0:4:0:-1: Attached to scbus4
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
> (probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:3a,0 (Medium 
> not present)
> da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
> da0: <SanDisk SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 7663MB (15695871 512 byte sectors: 255H 63S/T 977C)
> (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
> (probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
> (probe0:umass-sim0:0:0:1): SCSI status: Check Condition
> (probe0:umass-sim0:0:0:1): SCSI sense: UNIT ATTENTION asc:29,0 (Power 
> on, reset, or bus device reset occurred)
> (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
> (probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
> (probe0:umass-sim0:0:0:1): SCSI status: Check Condition
> (probe0:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not 
> present)
> cd1 at umass-sim0 bus 0 scbus4 target 0 lun 1
> cd1: <SanDisk SanDisk Cruzer 8.02> Removable CD-ROM SCSI-0 device
> cd1: 40.000MB/s transfers
> cd1: cd present [49151 x 2048 byte records]
> WARNING: /media/usb0: GJOURNAL flag on fs but no gjournal provider below
>
> I chose to encrypt my home directory during the installation but I do 
> not have a boot issue.
> I recently have tried FreeBSD 9-beta1, FreeBSD 9-beta3 and FreeBSD 8.2 
> with similar results.  I previously posted to freebsd-questions <at>  and 
> freebsd-multimedia <at>  and did not get resolution.  Neither the Handbook 
> or the PC BSD docs have helped me either.
>
> I think that cam or automount does not like something in my 
> configuration.  I do not see anything blatantly wrong with the 
> /etc/devfs.conf or /etc/fstab.  I was finally able to get a new USB 
> stick to mount reliably, yet, the DVD-ROM drive won't mount.  I do not 
> like the way SanDisk configures the stick providing a CD_9660 
> partition somehow burned in.  I have yet to figure out a way to delete 
> this and I hope that it doesn't affect cam, devd, or something else.
>
> The TSST drive worked fine on Windows Vista and Debian.  Since I can 
> boot from it, I think I can assume the drive is okay.  $>cdcontrol 
> play 1 spins an audio CD but, it won't output to the speakers.  
> Graphical programs such as KsCD don't even see the tracks.  The KDE 
> device notifier sees both the CD and the USB stick but I cannot mount 
> them from there.
>
> Otherwise, this release of PC BSD works well on this particular hardware.
>
> Thank You,
> Michael
>
>
>
> _______________________________________________
> Support mailing list
> Support@...
> http://lists.pcbsd.org/mailman/listinfo/support
>
>
This is the United States calling.  Are we reaching?

Thank You,
Michael

Gmane