Joachim Holzwarth | 2 Aug 16:16 2010
Picon
Picon

commit module audio/mixxx

Hello,
here's a module for the DJ software "Mixxx". To get it work I had to symlink 
/Programs/Mixxx/share/mixxx to /usr/local/share, because the program seems to 
require this path for finding its libraries. So have a close look into the 
overlay-dir, maybe there exists a more sophisticated solution.

Joachim

Attachment (Mixxx.tar.gz): application/x-compressed-tar, 4280 bytes
_______________________________________________
Pbi-dev mailing list
Pbi-dev@...
http://lists.pcbsd.org/mailman/listinfo/pbi-dev
Sam Lin | 6 Aug 09:46 2010
Picon

PBI build failed due to an incomplete port tree in pbi builder 2.5 ?

Hi,

I was trying to build a pbi for math/R (a statistics environment and
language) using PBI Builder 2.5 on PC-BSD 8.1, whereas it was not
successful and I found something weird. The last few line of my
build.log shows that:

======== build.log from here  ===========

ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
cd: can't cd to /usr/ports/math/R
make: don't know how to make clean. Stop
make: don't know how to make install. Stop
make: don't know how to make install. Stop
ERROR: 2.1 Build failed of math/R!!!

============ to here ===============

It appears that something is wrong with the directory or the path to
the ports, so I checked out my /pbi-build/ports/ and alas!

======== /pbi-build/ports/ from here =======

total 884
-rw-r--r--    1 root  wheel      19  7月 15  1997 .cvsignore
-rw-r--r--    1 root  wheel   56860  6月  7 05:17 CHANGES
-rw-r--r--    1 root  wheel    1498  1月  1  2010 COPYRIGHT
-rw-r--r--    1 root  wheel    2416  7月  5 19:40 GIDs
-rw-r--r--    1 root  wheel    4631  2月  8 00:51 KNOBS
(Continue reading)

Kris Moore | 6 Aug 14:22 2010

Re: PBI build failed due to an incomplete port tree in pbi builder 2.5 ?

On 08/06/2010 03:46, Sam Lin wrote:
> Hi,
>
> I was trying to build a pbi for math/R (a statistics environment and
> language) using PBI Builder 2.5 on PC-BSD 8.1, whereas it was not
> successful and I found something weird. The last few line of my
> build.log shows that:
>
> ======== build.log from here  ===========
>
> ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
> a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
> cd: can't cd to /usr/ports/math/R
> make: don't know how to make clean. Stop
> make: don't know how to make install. Stop
> make: don't know how to make install. Stop
> ERROR: 2.1 Build failed of math/R!!!
>
> ============ to here ===============
>
> It appears that something is wrong with the directory or the path to
> the ports, so I checked out my /pbi-build/ports/ and alas!
>
> ======== /pbi-build/ports/ from here =======
>
> total 884
> -rw-r--r--    1 root  wheel      19  7月 15  1997 .cvsignore
> -rw-r--r--    1 root  wheel   56860  6月  7 05:17 CHANGES
> -rw-r--r--    1 root  wheel    1498  1月  1  2010 COPYRIGHT
> -rw-r--r--    1 root  wheel    2416  7月  5 19:40 GIDs
(Continue reading)

Jesse Smith | 6 Aug 22:42 2010
Picon

New PBI module

Hello PBIians,

Please find attached a new module for the game Search and Rescue, a 3D
flight simulator. I built and ran the module in PBI-builder without any
problems, so I think it's good to go, but please let me know if any
errors are found.

Thanks,
Jesse

Attachment (searchandrescue.tar.gz): application/x-compressed-tar, 3535 bytes
_______________________________________________
Pbi-dev mailing list
Pbi-dev@...
http://lists.pcbsd.org/mailman/listinfo/pbi-dev
Sam Lin | 7 Aug 02:48 2010
Picon

Re: Pbi-dev Digest, Vol 41, Issue 2

It is very odd, and this old laptop is freshly installed with PC-BSD
8.1 and I haven't really fed my 120GB harddrive up with my data yet.

============== df -ih from here ==================

Filesystem            Size    Used   Avail Capacity iused ifree %iused
 Mounted on
/dev/label/rootfs0    1.9G    375M    1.4G    21%    6.8k  276k    2%   /
devfs                 1.0K    1.0K      0B   100%       0     0  100%   /dev
/dev/label/var0       989M    156M    754M    17%     27k  114k   19%   /var
/dev/label/usr0       104G     17G     78G    18%    1.3M   13M    9%   /usr
procfs                4.0K    4.0K      0B   100%       1     0  100%   /proc
linprocfs             4.0K    4.0K      0B   100%       1     0  100%
 /compat/linux/proc
tmpfs                 1.9G     28K    1.9G     0%      25  4.2M    0%   /tmp
/tmp                  1.9G     28K    1.9G     0%      25  4.2M    0%
 /usr/jails/portjail/tmp
/media                1.9G    375M    1.4G    21%    6.8k  276k    2%
 /usr/jails/portjail/media
/usr/home             104G     17G     78G    18%    1.3M   13M    9%
 /usr/jails/portjail/usr/home
devfs                 1.0K    1.0K      0B   100%       0     0  100%
 /usr/jails/portjail/dev
procfs                4.0K    4.0K      0B   100%       1     0  100%
 /usr/jails/portjail/proc
devfs                 1.0K    1.0K      0B   100%       0     0  100%   /dev

============== to here ======================

Oddly, a manual run of "portsnap -p /pbi-build/ports fetch extract
(Continue reading)

Jesse Smith | 7 Aug 13:17 2010
Picon

Portsnap

-----Original Message-----
From: Sam Lin <semin2006@...>
To: pbi-dev@...
Subject: Re: [PC-BSD Pbi-dev] Pbi-dev Digest, Vol 41, Issue 2
Date: Sat, 7 Aug 2010 12:48:36 +1200

It is very odd, and this old laptop is freshly installed with PC-BSD
8.1 and I haven't really fed my 120GB harddrive up with my data yet.

============== df -ih from here ==================

Filesystem            Size    Used   Avail Capacity iused ifree %iused
 Mounted on
/dev/label/rootfs0    1.9G    375M    1.4G    21%    6.8k  276k    2%   /
devfs                 1.0K    1.0K      0B   100%       0     0  100%   /dev
/dev/label/var0       989M    156M    754M    17%     27k  114k   19%   /var
/dev/label/usr0       104G     17G     78G    18%    1.3M   13M    9%   /usr
procfs                4.0K    4.0K      0B   100%       1     0  100%   /proc
linprocfs             4.0K    4.0K      0B   100%       1     0  100%
 /compat/linux/proc
tmpfs                 1.9G     28K    1.9G     0%      25  4.2M    0%   /tmp
/tmp                  1.9G     28K    1.9G     0%      25  4.2M    0%
 /usr/jails/portjail/tmp
/media                1.9G    375M    1.4G    21%    6.8k  276k    2%
 /usr/jails/portjail/media
/usr/home             104G     17G     78G    18%    1.3M   13M    9%
 /usr/jails/portjail/usr/home
devfs                 1.0K    1.0K      0B   100%       0     0  100%
 /usr/jails/portjail/dev
procfs                4.0K    4.0K      0B   100%       1     0  100%
(Continue reading)

Sam Lin | 8 Aug 08:50 2010
Picon

Re: Pbi-dev Digest, Vol 41, Issue 3

Hi Kris and PBIian,

I have finished creating a PBI for math/R - a statistical language and
environment. Please could you advice me what I should do next. Do I
just attach the compressed archive to the mailing list or do I need to
get approved by the PBI dev committee so as to upload the archive to
the PBI server?

Regards,
Sam

>> Message: 2
>> Date: Fri, 06 Aug 2010 08:22:23 -0400
>> From: Kris Moore <kris@...>
>> To: pbi-dev@...
>> Subject: Re: [PC-BSD Pbi-dev] PBI build failed due to an incomplete
>> ? ? ? ?port tree in ? ?pbi builder 2.5 ?
>> Message-ID: <4C5BFE7F.5010904@...>
>> Content-Type: text/plain; charset=UTF-8; format=flowed
>
>>>
>>
>> That is very odd. You're not out of disk space on the partition
>> pbi-build is located are you?
>>
>> How about if you manually run "portsnap -p /pbi-build/ports fetch
>> extract update" does it finish?
>>
>> --
>> Kris Moore
(Continue reading)

Jesse Smith | 8 Aug 14:01 2010
Picon

math/R PBI

Hi Sam,

As I recall you made and tested a module for math/R. That is, a PBI
which ties into the FreeBSD Ports tree. If that's correct, you can make
a tarball of the module and attach it here. Kris tells me that they
don't need the actual PBI file, nor any of the binaries, just the module
you placed in the PBI builder.

Hope that helps,
Jesse

-----Original Message-----
From: Sam Lin <semin2006@...>
To: pbi-dev@...
Subject: Re: [PC-BSD Pbi-dev] Pbi-dev Digest, Vol 41, Issue 3
Date: Sun, 8 Aug 2010 18:50:58 +1200

Hi Kris and PBIian,

I have finished creating a PBI for math/R - a statistical language and
environment. Please could you advice me what I should do next. Do I
just attach the compressed archive to the mailing list or do I need to
get approved by the PBI dev committee so as to upload the archive to
the PBI server?

Regards,
Sam

>> Message: 2
>> Date: Fri, 06 Aug 2010 08:22:23 -0400
(Continue reading)

Sam Lin | 9 Aug 00:46 2010
Picon

Re: Pbi-dev Digest, Vol 41, Issue 4

Hi Jesse,

Thanks for your reply. I did make a tar ball for math/R; I was just
wondering what is the appropriate process to go thru from here, as
according to Dru's book (FYI, Chapter 14, page 342) I am supposed to
get credentials first before I can upload the archive to the ftp
server. Attached is the tarball for math/R anyway.

Thank you.

Sam

> -----Original Message-----
> Date: Sun, 08 Aug 2010 09:01:35 -0300
> From: Jesse Smith <jessefrgsmith@...>
> To: pbi-dev <pbi-dev@...>
> Subject: [PC-BSD Pbi-dev] math/R PBI
> Message-ID: <1281268895.2506.4.camel <at> hp-laptop>
> Content-Type: text/plain; charset="UTF-8"
>
> Hi Sam,
>
> As I recall you made and tested a module for math/R. That is, a PBI
> which ties into the FreeBSD Ports tree. If that's correct, you can make
> a tarball of the module and attach it here. Kris tells me that they
> don't need the actual PBI file, nor any of the binaries, just the module
> you placed in the PBI builder.
>
> Hope that helps,
> Jesse
(Continue reading)

Jesse Smith | 9 Aug 14:37 2010
Picon

PBI module uploads


-----Original Message-----
From: Sam Lin <semin2006@...>
To: pbi-dev@...
Subject: Re: [PC-BSD Pbi-dev] Pbi-dev Digest, Vol 41, Issue 4
Date: Mon, 9 Aug 2010 10:46:44 +1200

Hi Jesse,

Thanks for your reply. I did make a tar ball for math/R; I was just
wondering what is the appropriate process to go thru from here, as
according to Dru's book (FYI, Chapter 14, page 342) I am supposed to
get credentials first before I can upload the archive to the ftp
server. Attached is the tarball for math/R anyway.

Thank you.

Sam

======================================================

Sam,

I think Kris handles committing new modules to the build server. There
may be others, but I think he may be the only person collecting new
modules here.

Jesse

Gmane