Problem upgrading clamav

Getting this error trying to upgrade:

- sudo port upgrade clamav
--->  Deactivating clamav 0.75.1_0
Error: Deactivating clamav 0.75.1_0 failed: Image error: clamav 0.75.1_0 not
installed as an image.

Current installed version is 0.86.2. port version is 1.2.1.

--

-- 
Randall Perry
sysTame

Xserve Web Hosting/Co-location/Leasing
QuickTime Streaming
Mac Consulting/Sales

http://www.systame.com/

Re: Problem installing Abiword on MacBook

Use the abiword2 port instead.

On May 31, 2006, at 16:10, John Patterson wrote:

> Hi,
>
> I tried to install Abiword on my MacBook Pro and received this error:
>
> --->  Building abiword with target {}
> Error: Target com.apple.build returned: shell command "cd "/opt/ 
> local/var/db/dports/build/ 
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ 
> dports_gnome_abiword/work/abiword-1.0.2/abi" && make " returned  
> error 2
> Command output: make -C /opt/local/var/db/dports/build/ 
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ 
> dports_gnome_abiword/work/abiword-1.0.2/expat
> cd lib; make
> make[2]: Nothing to be done for `all'.
> make -C /opt/local/var/db/dports/build/ 
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ 
> dports_gnome_abiword/work/abiword-1.0.2/psiconv
> make  all-recursive
> Making all in compat
> make[3]: Nothing to be done for `all'.
> Making all in psiconv
> make[3]: Nothing to be done for `all'.
> make[3]: Nothing to be done for `all-am'.
> make -C /opt/local/var/db/dports/build/ 
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ 

Re: Unable to upgrade Pango because of wrong checksums

There is a bad GNOME mirror in /opt/local/share/darwinports/resources/ 
port1.0/fetch/mirror_sites.tcl

edit that file and remove every line that includes planetmirror.com

then do a "sudo port clean --all pango ; sudo port -dv upgrade pango"

On May 31, 2006, at 11:17, Ryan Schmidt wrote:

>
> On May 25, 2006, at 20:34, Eric Hoch wrote:
>
>> today I did a "sudo port selfupdate" to update my infrastructure
>> and afterwards a "port outdated" port outdated showed me that pango
>> is outdated.
>>
>> I did a "sudo port -d -v upgrade pango" but pango won't install
>> instead it fails with:
>
> Sounds like you got a corrupted download.
>
>
>> --->  Verifying checksum(s) for pango
>> DEBUG: Executing com.apple.checksum (pango)
>> --->  Checksumming pango-1.12.2.tar.bz2
>> Error: Checksum (md5) mismatch for pango-1.12.2.tar.bz2
>> Portfile checksum: pango-1.12.2.tar.bz2 md5
>> f41488236baf881a4844216ac61abc24
>
> This checksum matches the one listed on the Pango web site, as you  

Re: Problem upgrading clamav

On May 31, 2006, at 9:11 PM, Randall Perry wrote:
> Getting this error trying to upgrade:
>
> - sudo port upgrade clamav
> --->  Deactivating clamav 0.75.1_0
> Error: Deactivating clamav 0.75.1_0 failed: Image error: clamav  
> 0.75.1_0 not
> installed as an image.
>
> Current installed version is 0.86.2. port version is 1.2.1.

Are you using 'direct' mode (instead of the default, 'image' mode?)

If so, I don't think the released version of darwinports supports  
upgrade (the CVS version does, though).

--
Daniel J. Luke
+========================================================+
| *---------------- dluke <at> geeklair.net ----------------* |
| *-------------- http://www.geeklair.net -------------* |
+========================================================+
|   Opinions expressed are mine and do not necessarily   |
|          reflect the opinions of my employer.          |
+========================================================+

_______________________________________________
Darwinports mailing list

Re: Problem upgrading clamav

> On May 31, 2006, at 9:11 PM, Randall Perry wrote:
>> Getting this error trying to upgrade:
>> 
>> - sudo port upgrade clamav
>> --->  Deactivating clamav 0.75.1_0
>> Error: Deactivating clamav 0.75.1_0 failed: Image error: clamav
>> 0.75.1_0 not
>> installed as an image.
>> 
>> Current installed version is 0.86.2. port version is 1.2.1.
> 
> Are you using 'direct' mode (instead of the default, 'image' mode?)
> 
Not consciously. What is direct mode? Searched the man page and didn't see
it.

Tried 'port clean --all clamav' and upgraded again, but got the same error.

> If so, I don't think the released version of darwinports supports
> upgrade (the CVS version does, though).
> 

--

-- 
Randall Perry
sysTame

Xserve Web Hosting/Co-location/Leasing
QuickTime Streaming
Mac Consulting/Sales

Re: Problem upgrading clamav

On Jun 1, 2006, at 9:57 AM, Randall Perry wrote:
>> Are you using 'direct' mode (instead of the default, 'image' mode?)
>>
> Not consciously. What is direct mode? Searched the man page and  
> didn't see
> it.

It's a ports.conf setting:

% grep portinstalltype /opt/local/etc/ports/ports.conf
portinstalltype         image

(the above is the default)

> Tried 'port clean --all clamav' and upgraded again, but got the  
> same error.

If you just want to make things work, you can probably do:

port -f uninstall clamav
port install clamav
--
Daniel J. Luke
+========================================================+
| *---------------- dluke <at> geeklair.net ----------------* |
| *-------------- http://www.geeklair.net -------------* |
+========================================================+
|   Opinions expressed are mine and do not necessarily   |
|          reflect the opinions of my employer.          |
+========================================================+

rsync error?

I have received the following error when trying to install ports:

--->  Fetching pkgconfig
--->  Attempting to fetch pkg-config-0.20.tar.gz from http:// 
pkgconfig.freedesktop.org/releases/
--->  Attempting to fetch pkg-config-0.20.tar.gz from http:// 
distfiles-od.opendarwin.org/
--->  Attempting to fetch pkg-config-0.20.tar.gz from http:// 
distfiles-msn.opendarwin.org/
--->  Attempting to fetch pkg-config-0.20.tar.gz from http:// 
distfiles-bay13.opendarwin.org/
Error: Target com.apple.fetch returned: fetch failed
Error: The following dependencies failed to build: glib2 pkgconfig  
gtk2 atk cairo fontconfig expat freetype zlib libpixman libpng render  
xrender pango Xft2 tiff jpeg libpcap openssl
Error: /opt/local/bin/port: Status 1 encountered during processing.

I have tried to install different ports and each of them gives me  
this error. Is this a situation where rsync is being blocked, or is  
there something else here that I am missing? The strange thing is  
that it installed 2 dependencies and then started returning this error.

This has probably been covered in previous posts. I apologize if this  
is the case.

Re: Problem installing Abiword on MacBook

Thanks for the reply.  I tried installing abiword2 as you suggested  
and got this error:

...

--->  Fetching at-spi
--->  Attempting to fetch at-spi-1.7.7.tar.bz2 from http:// 
www.gtlib.cc.gatech.edu/pub/gnome/sources/at-spi/1.7/
--->  Verifying checksum(s) for at-spi
--->  Extracting at-spi
--->  Configuring at-spi
--->  Building at-spi with target all
Error: Target com.apple.build returned: shell command "cd "/opt/local/ 
var/db/dports/build/ 
_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dp 
orts_gnome_at-spi/work/at-spi-1.7.7" && make all" returned error 2
Command output: /usr/bin/ld: warning multiple definitions of symbol  
_Bonobo_Stream_truncate
../libspi/.libs/libspi.dylib(Accessibility-stubs.o) definition of  
_Bonobo_Stream_truncate
/opt/local/lib/libbonobo-2.dylib(Bonobo-stubs.o) definition of  
_Bonobo_Stream_truncate
/usr/bin/ld: warning multiple definitions of symbol  
_Bonobo_Stream_unImplemented1
../libspi/.libs/libspi.dylib(Accessibility-stubs.o) definition of  
_Bonobo_Stream_unImplemented1
/opt/local/lib/libbonobo-2.dylib(Bonobo-stubs.o) definition of  
_Bonobo_Stream_unImplemented1
/usr/bin/ld: warning multiple definitions of symbol  
_Bonobo_Stream_unImplemented2

nmap

Some people said they had no trouble with nmap on Intel Macs. I found  
a few things on the web discussing the problem, saying it was a gcc  
optimization problem. I also saw a note saying the maintainer would  
be sending out a patch real soon now. That was a while ago.

Here's an example:

sudo nmap -A naulahka.org

Starting Nmap 4.01 ( http://www.insecure.org/nmap/ ) at 2006-06-01  
11:32 PDT
caught SIGSEGV signal, cleaning up
Abort

-A is just the easiest way to make it crash. Other flag settings  
result in the same behavior.

Re: Unable to upgrade Pango because of wrong checksums

Hi Randall, 
Am Thu, 1 Jun 2006 05:19:28 -0400, schrieb Randall Wood:
> There is a bad GNOME mirror in 
> /opt/local/share/darwinports/resources/port1.0/fetch/mirror_sites.tcl
> 
> edit that file and remove every line that includes planetmirror.com
> 
> then do a "sudo port clean --all pango ; sudo port -dv upgrade pango"

Thanks for your help. After removing the planetmirror mirror I was 
able to update pango. 

Kind regards, 
Eric Hoch

--

-- 
## de.OpenOffice.org - Office für MacOS X, Linux, Solaris & Windows
## Openoffice.org - ich steck mit drin!