Re: Total failure on port install of any package

On Wed, Aug 31, 2005 at 06:41:27PM -0400, Sean Ahern wrote:
> On Aug 31, 2005, at 6:18 PM, Eric Hall wrote:
> >    From the full_build.gz you attached, the failure
> >appears to be in the "activation" stage [1], but its not
> >clear *why*.  Can you re-run the install as:
> >
> >    % sudo port -v -d install zlib
> >
> >and capture that output?
> 
> Sure.  You will find it attached to this email.  I'm not sure it's  
> going to tell you much, though.

	Well, it tells me something is really weird, I don't know
why you're seeing the receipt contents (I don't see it when installing
popt for example).  I'm wondering if something has gone (badly) wrong
during the selfupdate (no idea why).  As much as I don't like the
idea, have you tried removing the DP install you've got [1] and
re-installing DP from the disk image and *not* doing a selfupdate? 
That would tell us if you've got a local system problem or if
something is going wrong in the selfupdate.

	-eric

[1] /bin/rm -rf /opt/local && /bin/rm -rf /Library/Tcl/darwinports1.0

	

Re: Total failure on port install of any package

On Aug 31, 2005, at 7:05 PM, Eric Hall wrote:
>     Well, it tells me something is really weird, I don't know
> why you're seeing the receipt contents (I don't see it when installing
> popt for example).  I'm wondering if something has gone (badly) wrong
> during the selfupdate (no idea why).  As much as I don't like the
> idea, have you tried removing the DP install you've got [1] and
> re-installing DP from the disk image and *not* doing a selfupdate?
> That would tell us if you've got a local system problem or if
> something is going wrong in the selfupdate.

That's an interesting idea.  Still no joy, but the log of the install  
is attached.

-Sean

--
Sean Ahern
ahern <at> ornl.gov

_______________________________________________
Darwinports mailing list
Darwinports <at> opendarwin.org
http://www.opendarwin.org/mailman/listinfo/darwinports

xfig

Hello everyone,

I am having some issues installing xfig. First of all, it doesn't  
download properly, leading to the following error.

tibook:~ iqgrande$ sudo port install xfig
--->  Fetching xfig
--->  Attempting to fetch xfig-3.2.4-Xaw3d-1.5E.udiff from ftp:// 
ftp.visi.com/users/hawkeyd/X/
--->  Attempting to fetch xfig.3.2.4.full.tar.gz from http:// 
www.xfig.org//xfigdist/
--->  Verifying checksum(s) for xfig
Error: Checksum (md5) mismatch for xfig.3.2.4.full.tar.gz
Error: Target com.apple.checksum returned: Unable to verify file  
checksums

tibook:/opt/local/var/db/dports/distfiles/xfig iqgrande$ pwd
/opt/local/var/db/dports/distfiles/xfig
tibook:/opt/local/var/db/dports/distfiles/xfig iqgrande$ ls -l
total 96
-rw-r--r--   1 root  admin  34728 Aug 31 18:57 xfig-3.2.4- 
Xaw3d-1.5E.udiff
-rw-r--r--   1 root  admin   9615 Aug 31 18:57 xfig.3.2.4.full.tar.gz

Then, when I manually download it and place it into this directory.

tibook:~ iqgrande$ sudo port clean xfig
--->  Cleaning xfig
tibook:~ iqgrande$ sudo port install xfig
--->  Fetching xfig

Re: A point about the docs

Le 31 août 05 à 21:32, Juan Manuel Palacios a écrit :

>     Hi Bruno! Long time no hear from you  Hope things are doing  
> great! The online DarwinPorts documentation is sorely and  
> shamefully out of date, and since Kevin has offered help with it a  
> good number of times (with lots of actual work already done on  
> bringing it up to date), I have finally fulfilled my promise of  
> inviting him over to join the project to grant him the liberty of  
> fully maintaining our official documentation.
>
>     After all this is set and done, and if he accepts my invitation  
> of course (it's been quite long since I initially offered it ,  
> the documentation should see a good number of revisions to get up  
> to speed with your current practices, thus eliminating all existing  
> discrepancies with what we do in post 1.0/sync/selfupdate days.

Hi Juan,

Even after two mails on the same issue I've got the impression I've  
not managed to express the point I had in mind.

Trying to be as clear and concise as possible this time: the  
documentation says (wrongly) the portfiles live by default in ~/ 
darwinports/dports, while the "DarwinPorts-1.0 notes" in the 4 May  
news say (rightly) the portfiles live now by default in /opt/local/ 
var/db/dports/sources/.

This isn't a problem normally, as the corresponding setting has  
vanished from /opt/local/etc/ports/sources.conf, so that the updated  
location is used.

Re: 1.012 fixage/resolvage

On 2005-08-31 11:58:25 -0700, paul beard wrote:
> I ran a new self-update and this time, libiconv built and installed  
> just fine.

This is strange. Here with Mac OS X 10.4.2, I still get the same error
with the following commands:

  sudo port -d selfupdate
  sudo port -v clean libiconv
  sudo port -v upgrade libiconv

[...]
gcc iconv.o -o iconv  ../srclib/libicrt.a -L/opt/local/lib /opt/local/lib/libintl.dylib
/opt/local/lib/libiconv.dylib -lc
/usr/bin/ld: warning multiple definitions of symbol _locale_charset
/opt/local/lib/libiconv.dylib(localcharset.o) definition of _locale_charset
/opt/local/lib/libintl.dylib(localcharset.o) definition of _locale_charset
/usr/bin/ld: warning suggest use of -bind_at_load, as lazy binding may result in errors or different
symbols being used
/usr/bin/ld: warning prebinding disabled because of undefined symbols
/usr/bin/ld: Undefined symbols:
_iconv_canonicalize
symbol _locale_charset used from dynamic library /opt/local/lib/libiconv.dylib(localcharset.o)
not from earlier dynamic library /opt/local/lib/libintl.3.dylib(localcharset.o)
collect2: ld returned 1 exit status
make[1]: *** [install] Error 1
make: *** [install] Error 2

--

-- 
Vincent Lefèvre <vincent <at> vinc17.org> - Web: <http://www.vinc17.org/>

Re: 1.012 fixage/resolvage

I am also seeing this problem after a self-update a half hour ago.   
All installed ports are up-to-date.

Also Mac OS X 10.4.2.

Andre

On Aug 31, 2005, at 4:47 PM, Vincent Lefevre wrote:

> On 2005-08-31 11:58:25 -0700, paul beard wrote:
>
>> I ran a new self-update and this time, libiconv built and installed
>> just fine.
>>
>
> This is strange. Here with Mac OS X 10.4.2, I still get the same error
> with the following commands:
>
>   sudo port -d selfupdate
>   sudo port -v clean libiconv
>   sudo port -v upgrade libiconv
>
> [...]
> gcc iconv.o -o iconv  ../srclib/libicrt.a -L/opt/local/lib /opt/ 
> local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -lc
> /usr/bin/ld: warning multiple definitions of symbol _locale_charset
> /opt/local/lib/libiconv.dylib(localcharset.o) definition of  
> _locale_charset
> /opt/local/lib/libintl.dylib(localcharset.o) definition of  
> _locale_charset

Re: 1.012 fixage/resolvage

On Aug 31, 2005, at 4:54 PM, Andre Stechert wrote:

> I am also seeing this problem after a self-update a half hour ago.   
> All installed ports are up-to-date.
>
> Also Mac OS X 10.4.2.
>
>

You may want to try port clean[all] and see if that helps.
--
Paul Beard
contact info: www.paulbeard.org/paulbeard.vcf

Are you trying to win an argument or solve a problem?

_______________________________________________
Darwinports mailing list
Darwinports <at> opendarwin.org
http://www.opendarwin.org/mailman/listinfo/darwinports

Download Behaviour

I'm seeing a strange download behavior. It only happens on some ports,
but I can't narrow down which ones. What happens is that it downloads
the entire file into the distfiles directory as a .TMP file, decides it
hasn't downloaded it, and downloads it again. This happens four times,
and then it gives up. It looks like this:

sal <at> cobblehill:sal>port -v configure inventor_gcc
--->  Fetching inventor_gcc
--->  inventor-2.1.5-10.src.tar.gz doesn't seem to exist in
/opt/local/var/db/dports/distfiles/inventor_gcc
--->  Attempting to fetch inventor-2.1.5-10.src.tar.gz from
ftp://oss.sgi.com/projects/inventor/download/
  % Total    % Received % Xferd  Average Speed          Time             Curr.
                                 Dload  Upload Total    Current  Left    Speed
100 8088k  100 8088k    0     0   555k      0  0:00:14  0:00:14  0:00:00 477k
--->  Attempting to fetch inventor-2.1.5-10.src.tar.gz from
http://distfiles-od.opendarwin.org/
  % Total    % Received % Xferd  Average Speed          Time             Curr.
                                 Dload  Upload Total    Current  Left    Speed
  0     0    0     0    0     0      0      0 --:--:--  0:00:00 --:--:-- 0
--->  Attempting to fetch inventor-2.1.5-10.src.tar.gz from
http://distfiles-msn.opendarwin.org/
  % Total    % Received % Xferd  Average Speed          Time             Curr.
                                 Dload  Upload Total    Current  Left    Speed
  0     0    0     0    0     0      0      0 --:--:--  0:00:04 --:--:-- 0
--->  Attempting to fetch inventor-2.1.5-10.src.tar.gz from
http://distfiles-bay13.opendarwin.org/
  % Total    % Received % Xferd  Average Speed          Time             Curr.
                                 Dload  Upload Total    Current  Left    Speed
  0     0    0     0    0     0      0      0 --:--:--  0:00:04 --:--:-- 0

Re: 1.012 fixage/resolvage

On 2005-08-31 17:07:51 -0700, paul beard wrote:
> You may want to try port clean[all] and see if that helps.

"sudo port -d clean" constantly says:

DEBUG: Changing to port directory: /Users/vinc17
DEBUG: Requested variant powerpc is not provided by port cotvnc.
DEBUG: Requested variant darwin is not provided by port cotvnc.
DEBUG: Requested variant macosx is not provided by port cotvnc.
DEBUG: Executing com.apple.main (cotvnc)
--->  Cleaning cotvnc
DEBUG: Executing com.apple.clean (cotvnc)
--->  Removing workpath for cotvnc
DEBUG: Removing directory: /opt/local/var/db/dports/build/file._Users_vinc17/work
DEBUG: Removing symlink: /Users/vinc17/work

It doesn't clean everything (e.g. not libiconv).

--

-- 
Vincent Lefèvre <vincent <at> vinc17.org> - Web: <http://www.vinc17.org/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.org/blog/>
Work: CR INRIA - computer arithmetic / SPACES project at LORIA

Re: 1.012 fixage/resolvage

I tried a

sudo port clean --all libiconv

followed by

sudo port install iconv

And got the same problem:

gcc iconv.o -o iconv  ../srclib/libicrt.a -L/opt/local/lib /opt/local/ 
lib/libintl.dylib /opt/local/lib/libiconv.dylib -lc
ld: warning multiple definitions of symbol _locale_charset
/opt/local/lib/libiconv.dylib(localcharset.o) definition of  
_locale_charset
/opt/local/lib/libintl.dylib(localcharset.o) definition of  
_locale_charset
ld: warning suggest use of -bind_at_load, as lazy binding may result  
in errors or different symbols being used
ld: warning prebinding disabled because of undefined symbols
ld: Undefined symbols:
_iconv_canonicalize
symbol _locale_charset used from dynamic library /opt/local/lib/ 
libiconv.dylib(localcharset.o) not from earlier dynamic library /opt/ 
local/lib/libintl.3.dylib(localcharset.o)
make[1]: *** [install] Error 1
make: *** [install] Error 2

I'll probably take a deeper look later tonight.