Discussion of issues relevant to all Hitachi Super-H (SH3/4) chips-based NetBSD ports

Joel CARNAT | 11 Mar 2007 14:55

Re: how to install NetBSD/landisk

Hi,

thanks for the first replies.
now... where do I find the binary tarball ?

I didn't anything in the places I usually find /i386 and /sparc64 stuff.
I looked for sh3* stuff. Maybe this is a wrong regexp ?

TIA,
	Jo

On Thu, Feb 22 2007 - 23:39, Joel CARNAT wrote:
> Hello,
> 
> I'm looking at buying a simple NAS thing and am interested in replacing
> the emebeded Linux but NetBSD. I probably would go for the Plextor because
> it's available in France.
> 
> What is the procedure to boot NetBSD on such devices ?
> 
> TIA,
>   Jo
>

Kristoffer Ericson | 12 Mar 2007 13:53

Picon

Re: how to install NetBSD/landisk

Greetings,

Anyone got a name and modelnumber for a Landisk-clone thats available in 
europe (sweden)?

Best wishes
Kristoffer

>From: Joel CARNAT <joel <at> carnat.net>
>Reply-To: joel <at> carnat.net
>To: port-sh3 <at> NetBSD.org
>Subject: Re: how to install NetBSD/landisk
>Date: Sun, 11 Mar 2007 14:55:49 +0100
>
>Hi,
>
>thanks for the first replies.
>now... where do I find the binary tarball ?
>
>I didn't anything in the places I usually find /i386 and /sparc64 stuff.
>I looked for sh3* stuff. Maybe this is a wrong regexp ?
>
>TIA,
>	Jo
>
>On Thu, Feb 22 2007 - 23:39, Joel CARNAT wrote:
> > Hello,
> >
> > I'm looking at buying a simple NAS thing and am interested in replacing
> > the emebeded Linux but NetBSD. I probably would go for the Plextor

(Continue reading)

Valeriy E. Ushakov | 12 Mar 2007 13:58

Picon

Re: how to install NetBSD/landisk

On Mon, Mar 12, 2007 at 12:53:45 +0000, Kristoffer Ericson wrote:

> Anyone got a name and modelnumber for a Landisk-clone thats available in 
> europe (sweden)?

Plextor PX-EH16L, PX-EH25L and PX-EH40L.

SY, Uwe
--

-- 
uwe <at> ptc.spbu.ru                         |       Zu Grunde kommen
http://snark.ptc.spbu.ru/~uwe/          |       Ist zu Grunde gehen

Valeriy E. Ushakov | 12 Mar 2007 14:02

Picon

Re: how to install NetBSD/landisk

On Sun, Mar 11, 2007 at 14:55:49 +0100, Joel CARNAT wrote:

> now... where do I find the binary tarball ?

ftp://ftp.netbsd.org/pub/NetBSD-daily/  e.g.
ftp://ftp.netbsd.org/pub/NetBSD-daily/HEAD/200703100002Z/landisk/

Hmm, i think landisk builds were not enabled for NeBSD-4 branch.  I'll
ask releng.  Current is i a bit of turmoil currently, so I wouldn't
recommend it, atm.

Alternatively, just build a landisk distribution yourself.  NetBSD has
very nice cross-compilation support.

SY, Uwe
--

-- 
uwe <at> ptc.spbu.ru                         |       Zu Grunde kommen
http://snark.ptc.spbu.ru/~uwe/          |       Ist zu Grunde gehen

Joel CARNAT | 12 Mar 2007 17:50

Re: how to install NetBSD/landisk

> On Sun, Mar 11, 2007 at 14:55:49 +0100, Joel CARNAT wrote:
>
>> now... where do I find the binary tarball ?
>
> ftp://ftp.netbsd.org/pub/NetBSD-daily/  e.g.
> ftp://ftp.netbsd.org/pub/NetBSD-daily/HEAD/200703100002Z/landisk/
>
> Hmm, i think landisk builds were not enabled for NeBSD-4 branch.  I'll
> ask releng.  Current is i a bit of turmoil currently, so I wouldn't
> recommend it, atm.
>
> Alternatively, just build a landisk distribution yourself.  NetBSD has
> very nice cross-compilation support.
>

OK, I'll do it with build.sh.
I was just not sure were/what to look for.

thanks.

Joel CARNAT | 12 Mar 2007 17:56

Re: how to install NetBSD/landisk

Mine is Plextor PX-EH40L.
I couldn't find any of the IO/DATA references outside Japan or America.

PX-EH40L is a model with the OS on the first partition on the disk.

For the moment, I just have opened it and check my backup/restore
procedure. I'm waiting for a serial cable (purchased on ebay) to try a
NetBSD/OpenBSD install on it.

I took a few picture while dismounting it.
http://www.tumfatig.net/grafx/hardware/Plextor/index.html

I'll write a small HTML doc when I will have finished the migration to
NetBSD.

> Greetings,
>
> Anyone got a name and modelnumber for a Landisk-clone thats available in
> europe (sweden)?
>
> Best wishes
> Kristoffer
>
>
>>From: Joel CARNAT <joel <at> carnat.net>
>>Reply-To: joel <at> carnat.net
>>To: port-sh3 <at> NetBSD.org
>>Subject: Re: how to install NetBSD/landisk
>>Date: Sun, 11 Mar 2007 14:55:49 +0100
>>

(Continue reading)

Joel CARNAT | 12 Mar 2007 18:59

Re: Re: how to install NetBSD/landisk

build.sh doesn't seem to recognize "landisk" as a '-a' argument.
does it work on -netbsd-4 or should I use some other ARCH ?

TIA,
	Jo

On Mon, Mar 12 2007 - 17:50, Joel CARNAT wrote:
> > On Sun, Mar 11, 2007 at 14:55:49 +0100, Joel CARNAT wrote:
> >
> >> now... where do I find the binary tarball ?
> >
> > ftp://ftp.netbsd.org/pub/NetBSD-daily/  e.g.
> > ftp://ftp.netbsd.org/pub/NetBSD-daily/HEAD/200703100002Z/landisk/
> >
> > Hmm, i think landisk builds were not enabled for NeBSD-4 branch.  I'll
> > ask releng.  Current is i a bit of turmoil currently, so I wouldn't
> > recommend it, atm.
> >
> > Alternatively, just build a landisk distribution yourself.  NetBSD has
> > very nice cross-compilation support.
> >
> 
> OK, I'll do it with build.sh.
> I was just not sure were/what to look for.
> 
> thanks.
>

Valeriy E. Ushakov | 12 Mar 2007 19:02

Picon

Re: Re: how to install NetBSD/landisk

On Mon, Mar 12, 2007 at 18:59:08 +0100, Joel CARNAT wrote:

> build.sh doesn't seem to recognize "landisk" as a '-a' argument.
> does it work on -netbsd-4 or should I use some other ARCH ?

landisk is MACHINE (-m), not MACHINE_ARCH (-a).  Use

build.sh -m landisk ...

SY, Uwe
--

-- 
uwe <at> ptc.spbu.ru                         |       Zu Grunde kommen
http://snark.ptc.spbu.ru/~uwe/          |       Ist zu Grunde gehen

Joel CARNAT | 12 Mar 2007 22:34

Re: Re: Re: how to install NetBSD/landisk

On Mon, Mar 12 2007 - 21:02, Valeriy E. Ushakov wrote:
> On Mon, Mar 12, 2007 at 18:59:08 +0100, Joel CARNAT wrote:
> 
> > build.sh doesn't seem to recognize "landisk" as a '-a' argument.
> > does it work on -netbsd-4 or should I use some other ARCH ?
> 
> landisk is MACHINE (-m), not MACHINE_ARCH (-a).  Use
> 
> build.sh -m landisk ...
> 

it's building. thanks!

I got the serial cable this evening so I plugued it on the mainboard.
The thing is I get junk on the output (same as if I had run  `cat
/bin/ls` for example) ; that is unreadable caracters. I tried hitting
ENTER but it doesn't seem to act as if the console got CR/LF.

Anyone knows what this mean ?
Is the serial cable not build correctly ?
Do I use the wrong settings (I use 9600 8-N-1) ?

TIA,
	Jo

Christos Zoulas | 13 Mar 2007 00:29

Re: how to install NetBSD/landisk

In article <20070312213411.GB1557 <at> atheria.tumfatig.net>,
Joel CARNAT  <joel <at> carnat.net> wrote:
>-=-=-=-=-=-
>
>On Mon, Mar 12 2007 - 21:02, Valeriy E. Ushakov wrote:
>> On Mon, Mar 12, 2007 at 18:59:08 +0100, Joel CARNAT wrote:
>> 
>> > build.sh doesn't seem to recognize "landisk" as a '-a' argument.
>> > does it work on -netbsd-4 or should I use some other ARCH ?
>> 
>> landisk is MACHINE (-m), not MACHINE_ARCH (-a).  Use
>> 
>> build.sh -m landisk ...
>> 
>
>it's building. thanks!
>
>I got the serial cable this evening so I plugued it on the mainboard.
>The thing is I get junk on the output (same as if I had run  `cat
>/bin/ls` for example) ; that is unreadable caracters. I tried hitting
>ENTER but it doesn't seem to act as if the console got CR/LF.
>
>Anyone knows what this mean ?
>Is the serial cable not build correctly ?
>Do I use the wrong settings (I use 9600 8-N-1) ?
>

Try different baud rates? 19.2 or 38.4 perhaps?

christos

(Continue reading)

Group

gmane.os.netbsd.ports.sh3.

Search Archive

Page

1 | 2

Articles in period: 17

March 2007

Language

Change language

Options

Current view: Threads only / Showing only 20 lines / Not hiding cited text.
Change to All messages, whole messages, or hide cited text.

Post a message
NNTP Newsgroup
Classic Gmane web interface
XML

XML

RSS Feed
List Information

About Gmane

Recent entries

ḫℰﺄﺄ⊖ (25 May 2013)
технические ткани (1 Apr 2013)
congratulations (19 Mar 2013)
MAN UTD COOPERAZIONE, (12 Mar 2013)
Перeвoзки Евpо Фyрaми 82-120м/куб по РФ.СНГ.E (11 Mar 2013)
Inna (24 Jan 2013)
long (7 Dec 2012)
new portal (6 Dec 2012)
Teren langa plaja Corbu, in rate, 50 euro x 100 rate, fara avans, fara (28 Nov 2012)
landisk DMA broken in NetBSD 6 (18 Nov 2012)
если есть желание познакомиться и вст� (6 Aug 2012)
DMA working in -current? (9 Feb 2012)
Important VirtualMerchant Information (12 Jan 2012)
Your account has been closed (11 Jan 2012)
Compiling issues on sh4 (26 Jun 2011)
landisk / Plextor Panicing problem (15 Jun 2011)
Dimagrire senza fatica (4 May 2011)
Nuovo sbiancante rapido (11 Sep 2010)
zi 1 ra 1994 ti bu ho (17 May 2010)
NetBSD/hpcsh 5.1_RC1 on HITACHI PERSONA (8 May 2010)
email mailing list (8 Apr 2010)

Archives

1	May 2013
1	April 2013
3	March 2013
3	February 2013
3	January 2013
3	December 2012
2	November 2012
1	August 2012
1	February 2012
2	January 2012
6	June 2011
1	May 2011
1	April 2011
1	September 2010
1	June 2010
2	May 2010
1	April 2010
1	January 2010
2	December 2009
1	November 2009
4	October 2009
2	September 2009
4	July 2009
8	June 2009
1	May 2009
5	March 2009
10	January 2009
7	October 2008
3	June 2008
3	May 2008
3	April 2008
1	November 2007
1	September 2007
3	May 2007
20	April 2007
17	March 2007
4	February 2007
1	December 2006
1	November 2006
8	October 2006
21	September 2006
7	August 2006
8	July 2006
10	May 2006
7	March 2006
2	February 2006
1	January 2006
8	December 2005
3	November 2005
2	September 2005
5	June 2005
5	April 2005
10	March 2005
3	January 2005
3	December 2004
1	November 2004
1	October 2004
1	September 2004
1	August 2004
1	June 2004
1	May 2004
1	April 2004
2	March 2004
6	February 2004
1	January 2004
1	December 2003
6	November 2003
3	October 2003
14	September 2003
5	August 2003
36	July 2003
4	June 2003
2	May 2003
2	April 2003
4	March 2003
3	February 2003
6	January 2003
1	December 2002
13	November 2002
1	October 2002
1	September 2002
2	August 2002
3	July 2002
2	June 2002
11	May 2002
9	April 2002
2	March 2002

Design

Zawodny | Right Menu | Left Menu

Your Own Design

Paste the URL of your CSS below. Download CSS template