headers
Devin D | 9 Jan 2012 22:59
Picon

Looking for help getting netbsd running on Jornada 690

I recently bought a hp Jornada 690 for around $60 shortly after learning 
I could run NetBSD on it.
I have read many old guides to get NetBSD running on this device, But I 
keep getting confused and getting nowhere.
I have a cf reader and another computer running Ubuntu that I have been 
using to get files onto the Jornada.

Can someone tell me how to get NetBSD running on this Jornada or link me 
to a guide on the topic?

Thanks
--Devin
Permalink | Reply | 4 comments |
headers
John Klos | 9 Jan 2012 20:08

Re: Looking for help getting netbsd running on Jornada 690

Hi,

> I recently bought a hp Jornada 690 for around $60 shortly after learning I 
> could run NetBSD on it.
> I have read many old guides to get NetBSD running on this device, But I keep 
> getting confused and getting nowhere.
> I have a cf reader and another computer running Ubuntu that I have been using 
> to get files onto the Jornada.
>
> Can someone tell me how to get NetBSD running on this Jornada or link me to a 
> guide on the topic?

http://www.netbsd.org/ports/hpcsh/howto-use.html

In a nutshell, make a small partition on a CF card which has hpcboot.exe, 
a NetBSD install kernel, and a miniroot.fs. Launch hpcboot.exe, point it 
to the netbsd kernel and miniroot.fs, boot, and run through the NetBSD 
installer.

John
Permalink | Reply | 0 comments |
headers
Devin D | 9 Jan 2012 23:37
Picon

Re: Looking for help getting netbsd running on Jornada 690

I did everything stated on the page 
http://www.netbsd.org/ports/hpcsh/howto-use.html
I put miniroot.fs , netbsd.gz , and hpcboot.exe on the card and launched 
hpcboot.
However, I do not have a serial cable for my jornada. I continued anyway 
and hit boot.
the system seems to be starting, then stops at the line:

/etc/rc.conf is not configured. multiuser boot aborted.
Enter pathname of shell or RETURN for sh:

I pressed the enter key and "hpckbd: unknown scan code 0x51 (10, 1)
then i realized no matter what key I hit i get that same error wiht 
different values at the end.

Did I do something wrong?

--Devin
Permalink | Reply | 2 comments |
headers
Valeriy E. Ushakov | 9 Jan 2012 22:06
Picon

Re: Looking for help getting netbsd running on Jornada 690

On Mon, Jan 09, 2012 at 14:37:09 -0800, Devin D wrote:

> /etc/rc.conf is not configured. multiuser boot aborted.
> Enter pathname of shell or RETURN for sh:
> 
> I pressed the enter key and "hpckbd: unknown scan code 0x51 (10, 1)
> then i realized no matter what key I hit i get that same error wiht 
> different values at the end.
> 
> Did I do something wrong?

Which "platform" (model) do you select in hpcboot menu?
E.g. "Jornada 690 (US/UK)" &c.

-uwe
Permalink | Reply | 1 comment |
headers
Michael | 9 Jan 2012 22:19
Picon

Re: Looking for help getting netbsd running on Jornada 690

I recall I had some trouble initially that was resolved by getting an 
updated hpcboot from someone off the list.

On Tue, 10 Jan 2012, Valeriy E. Ushakov wrote:

> On Mon, Jan 09, 2012 at 14:37:09 -0800, Devin D wrote:
>
>> /etc/rc.conf is not configured. multiuser boot aborted.
>> Enter pathname of shell or RETURN for sh:
>>
>> I pressed the enter key and "hpckbd: unknown scan code 0x51 (10, 1)
>> then i realized no matter what key I hit i get that same error wiht
>> different values at the end.
>>
>> Did I do something wrong?
>
> Which "platform" (model) do you select in hpcboot menu?
> E.g. "Jornada 690 (US/UK)" &c.
>
> -uwe
>
>
Permalink | Reply | 0 comments |

Gmane