I undefined CFB_NEED_SCREEN_PRIVATE in hpcFB.c and the resulting Xhpc server runs on hpcsh (jornada 680). It still has issues, dumping core here and there, but at least that's something already. http://snark.ptc.spbu.ru/~uwe/netbsd/jornada/photo/xhpc.jpg SY, Uwe -- -- uwe <at> ptc.spbu.ru | Zu Grunde kommen http://www.ptc.spbu.ru/~uwe/ | Ist zu Grunde gehen
On Sat, Jan 03, 2004 at 09:03:07AM +0300, Valeriy E. Ushakov wrote: > I undefined CFB_NEED_SCREEN_PRIVATE in hpcFB.c and the resulting Xhpc > server runs on hpcsh (jornada 680). It still has issues, dumping core > here and there, but at least that's something already. Good work Uwe! I think it is really cool with such a little device running a real OS! With X it will be even better. Real useful little device. I am still struggling to get my 620LX in working order. /Christer -- -- Christer O. Andersson Odensbacken
Hi,
yesterday I installed 1.6.1. on my Jornada and all runs fine except
I can't get any of these characters < | > ³ [ ~ by pressing
ALT GR and the letter-key. Some of those "black" letters work,
like: \ ² { } ] <at>
I've set hpcboot.exe to use German kbd and also tried to set US-Layout
w/ wsconsctl -k -w encoding=US to US which allows me to use |<>
but switching back to German those characters disappear.
Am I missing something?
Stefan
--
--
Most of the VAX instructions are in microcode,
but HALT and NO-OP are in hardware for efficiency.
On Wed, Jan 07, 2004 at 01:16:11 +0200, Stefan Schumacher wrote:
> yesterday I installed 1.6.1. on my Jornada and all runs fine except
> I can't get any of these characters < | > ? [ ~ by pressing
> ALT GR and the letter-key. Some of those "black" letters work,
> like: \ ² { } ] <at>
This is fixed in -current sys/dev/hpc/hpckbdkeymap.h revision 1.19.
-current also have other important fixes and improvements (working
keyboard "chords", touch-screen driver (yes, X is working), etc).
A snapshot of current with gcc3 is available at:
ftp://ftp.netbsd.org/pub/NetBSD/misc/uwe/hpcsh-20030924-gcc331/
I plan to make a new snapshot of -current soon. I'm waiting for a
patch for libc/ligcc issues to be committed.
SY, Uwe
--
--
uwe <at> ptc.spbu.ru | Zu Grunde kommen
http://www.ptc.spbu.ru/~uwe/ | Ist zu Grunde gehen
Hi, Are there any supported WLAN PCMCIA cards? Stefan -- -- Der Trainer ist extrem hart, er ist nach Ostdeutschland geflüchtet. Die Simpsons
On Fri, Jan 16, 2004 at 01:48:51 +0200, Stefan Schumacher wrote: > Are there any supported WLAN PCMCIA cards? NETGEAR MA401 is what I use and it works for me both under NetBSD and WinCE. I also had a couple of other cards working but I don't remember which (borrowed them for short use at conferences &c). IIRC, one of them was Orinoco. SY, Uwe -- -- uwe <at> ptc.spbu.ru | Zu Grunde kommen http://www.ptc.spbu.ru/~uwe/ | Ist zu Grunde gehen
On Fri, 16 Jan 2004, Stefan Schumacher wrote: > Hi, > > > Are there any supported WLAN PCMCIA cards? > I run successfully a D-Link DWL-650 on my Jornada (you have to configure the kernel). Cheers, Torsten <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><> <> <> <> Torsten Harenberg harenberg <at> physik.uni-wuppertal.de <> <> Bergische Universitaet <> <> FB 8 - Physik Tel.: +49 (0)202 439-2740 <> <> Gaussstr. 20 Fax : +49 (0)202 439-2811 <> <> 42097 Wuppertal <> <> <> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
hi, I'm attempting to install netbsd on a jornada 690, and getting rather confused. Using the 2003-09-24 snapshot from uwe's website, I've booted the jornada and mounted a miniroot filesystem; currently, I'm trying to label some CF to use, using disklabel from the miniroot fs: # disklabel -i -I wd0 partition> P 16 partitions: # size offset fstype [fsize bsize cpg/sgs] a: 990704 10240 4.2BSD 0 0 0 # (Cyl. 10*- 992) d: 1000944 0 unused 0 0 # (Cyl. 0 - 992) e: 10177 63 MSDOS # (Cyl. 0*- 10*) parition> W Label disk [n]? y Label written partition> Q (Does this seem sane? This is 512MB CF) Now if i run disklabel -i, the kernel prints "wd0: no disk label", and disklabel shows: 7 partitions: # size offset fstype [fsize bsize cpg/sgs] a: 983040 16384 unused 0 0 # (Cyl. 16*- 991*) d: 16352 32 MSDOS # (Cyl. 0*- 16*) e: 983040 63 unused 0 0 # (Cyl. 16*- 991*)(Continue reading)
* Valeriy E. Ushakov (uwe <at> ptc.spbu.ru) wrote: > > > Are there any supported WLAN PCMCIA cards? > > NETGEAR MA401 is what I use and it works for me both under NetBSD and > WinCE. This weekend I got a MA401 and tested it with 1.6.1 and the hpcsh-20030924-gcc331 snapshot. On both systems I get: NETGEAR MA401 Wireless PC, Card, Version 01.00 (manufacturer 0x0156, product 0x0002) at pcmcia0, function 0 not configured Shall I pass some options to the Kernel or am I required to recompile it? If so, how do I have to configure the Kernel? -- -- The trouble with programmers is that you can never tell what a programmer is doing until it's too late. Seymour Cray
On Mon, 26 Jan 2004, Stefan Schumacher wrote: > Shall I pass some options to the Kernel or am I required to recompile it? Don't know what Kernel Uwe included, but if it's GENERIC you have to recompile the kernel. > If so, how do I have to configure the Kernel? Take /usr/src/sys/arch/hpcsh/conf/GENERIC as a basis. Copy the file with a name you like. Then a look at the # PCMCIA network interfaces section in /usr/src/sys/arch/i386/conf/GENERIC. Include (copy the appropriate line!) the driver for your card in your hpcsh conf file. Then build a new kernel. This is documented in http://www.netbsd.org/Documentation/kernel/#how_to_build_a_kernel But as you need to cross compile, you should have a look at this nice article, too: http://www.onlamp.com/pub/a/bsd/2003/06/05/Big_Scary_Daemons.html The instructions are basically the same, but change "-m hpcarm" with "-m hpcsh".(Continue reading)
RSS Feed6 | |
|---|---|
2 | |
5 | |
4 | |
1 | |
4 | |
2 | |
1 | |
4 | |
2 | |
5 | |
1 | |
7 | |
6 | |
9 | |
5 | |
1 | |
4 | |
5 | |
5 | |
2 | |
8 | |
2 | |
14 | |
7 | |
15 | |
19 | |
12 | |
1 | |
20 | |
8 | |
26 | |
14 | |
59 | |
26 | |
12 | |
7 | |
28 | |
48 | |
64 | |
36 | |
14 | |
7 | |
18 | |
20 | |
8 | |
19 | |
17 | |
7 | |
4 | |
21 | |
1 | |
13 | |
11 | |
14 | |
1 | |
6 | |
6 | |
2 | |
1 | |
2 | |
5 | |
12 | |
11 | |
1 | |
12 | |
7 | |
8 | |
2 | |
14 | |
6 | |
5 | |
2 |
