headers
Diana Eichert | 13 Dec 23:27

5.1 install hangs on Certance CP3100

I'm taking advantage of a slow period at work to install
5.1 on a Certance CP3100.

When booted with the install kernel it get's to where it
"should" start console interaction, but nothing occurs.
The last thing I get is the following

root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 402 days
WARNING: CHECK AND RESET THE DATE!

then nothing.

I believe this is related to interupt handing on the
Certance CP3100 AKA TeamASA NPWR-SCE.  I thought this
issue was resolved in the past, but it has been many
years since I tried installing NetBSD on one of these
systems.

g.day

diana

+Ethernet eth0: MAC address 00:0e:a4:00:10:e0
IP: 192.168.0.250/255.255.255.0, Gateway: 192.168.0.1
Default server: 192.168.0.1, DNS server IP: 192.168.0.1

RedBoot(tm) bootstrap and debug environment DPA3V2 - built 15:27:54, Feb 
6 2004
(Continue reading)

Permalink | Reply | 0 comments |
headers
Diana Eichert | 15 Dec 05:17

Re: 5.1 install hangs on Certance CP3100

I dug up Steve's post from many years ago in regards:  Fastest ARM board .

On Wed, 8 Nov 2006, Steve Woodford wrote:

> On Tuesday 24 October 2006 15:24, Diana Eichert wrote:
>
>> If you want a TeamASA design and are willing to do some porting, the
>> Certance CP3100 is actually the TeamASA NPWR-SCE.  It's a
>> discontinued product from Certance, but still available as a surplus
>> item.  The last one I bought was under US$200.
>
> Prompted by this email thread, I persuaded my employer (Wasabi Systems)
> to contribute our port to the Certance CP-3100. It's now committed in
> evbarm/cp3100 complete with HPI work-around in arm/xscale/i80321_icu.c.
>
> Enjoy. :)
>
> Cheers, Steve

I'm looking at Steve's original comment when he added support for the
CP3100.  He noted he added support for the HPI workaround, however
when I look at current config file for CP3100 I do not see it, while
"options 	I80321_HPI_ENABLED	# Uses the (non-maskable) HPI"
is defined in the TEAMASA_NPWR_FC config.

Should
"options        I80321_HPI_ENABLED      # Uses the (non-maskable) HPI"
be defined in the CP3100 config?

g.day
(Continue reading)

Permalink | Reply | 3 comments |
headers
S.P.Zeidler | 17 Dec 15:19
Picon

Re: 5.1 install hangs on Certance CP3100

Hi Diana,

Thus wrote Diana Eichert (deichert <at> wrench.com):

> I'm looking at Steve's original comment when he added support for the
> CP3100.  He noted he added support for the HPI workaround, however
> when I look at current config file for CP3100 I do not see it, while
> "options 	I80321_HPI_ENABLED	# Uses the (non-maskable) HPI"
> is defined in the TEAMASA_NPWR_FC config.
> 
> Should
> "options        I80321_HPI_ENABLED      # Uses the (non-maskable) HPI"
> be defined in the CP3100 config?

It wasn't in the original CP3100 config, so that's not bitrot,
but OTOH it's still worth giving it a try.
Please report your results :)

regards,
	spz
--

-- 
spz <at> serpens.de (S.P.Zeidler)
Permalink | Reply | 0 comments |

Gmane