Crni Gorac | 2 Apr 17:01 2006
Picon

USB memory key mounts very slowly on 3.0

Got an IBM Thinkpad R51 machine, together with IBM 512MB USB memory
key.  I just installed NetBSD 3.0 on my machine, and am trying to
setup mounting memory key.  But mounting is extremely slow - it takes
almost 2 min. to my NetBSD installation to mount the key with stock
NetBSD 3.0 kernel.  I tried with compiling my own kernel,
but with same results.  The device is immediately recognized with both
kernels after plugging in, however it takes forever until mounted (or
for any other operation, for example when looking for partitions using
disklabel it takes again about 2 min. until showing partitions).  Once
mounted, the device could be used fine, and un-mounting works
instantly.  BTW, the device is partitioned using Linux fdisk, and
partition in question (it is only partition on device) is FAT32
partition, formated again under Linux; but I don't think there is
anything wrong with that.  So - any suggestion here?

Thanks.

dosha@netbsd.pp.ru | 3 Apr 16:47 2006
Picon

Problem with ACPI in NetBSD 2.0.3_STABLE.

ACPI-functions do not work. For example hibernate, etc.
" apmd-d " prints a error - " cannot open device file '/dev/apmctl' ".
/dev/apmctl exists.

Support of ACPI-functions is enabled in a kernel-config. Below a part of 
a kernel-config:

#------------------------------------------------------------------------------------
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options     ACPIVERBOSE    # verbose ACPI device autoconfig messages

#
# Device configuration
#

mainbus0 at root

cpu* at mainbus?
#!!!!!!!!!!
ioapic* at mainbus?
#!!!!!!!!!!

# Doesn't do anything yet.
p64h2apic* at pci? dev? function?    # P64H2 IOxAPIC

#!!!!!!!!!!
apm0    at mainbus0            # Advanced power management
#!!!!!!!!!!

(Continue reading)

Jonathan A. Kollasch | 3 Apr 19:44 2006
Picon

Re: Problem with ACPI in NetBSD 2.0.3_STABLE.

On Mon, Apr 03, 2006 at 06:47:37PM +0400, dosha <at> netbsd.pp.ru wrote:
> ACPI-functions do not work. For example hibernate, etc.

Yes, for 2.0.x that's perfectly normal, IIRC rudimentary support
for that was only recently being developed for -current.  At
present the only way to do power management on a stable version
of NetBSD is with a working APM implementation.

	Jonathan Kollasch
Xianwen Chen | 4 Apr 11:18 2006
Picon

How to install Zend?

Some of my PHP scripts are incoded with Zend.I need to install Zend
decode support for PHP.However,I only found Zend Optimizer fo
FreeBSD.I cann't install it.What should I do?
Please help me!Thank you!

--
Xianwen Chen
College Of Economics And Trades,Shanghai Fishiries University
Shanghai,China
086-21-68022471
apple45 <at> gmail.com

Stephane Bortzmeyer | 4 Apr 21:36 2006

Re: How to install Zend?

On Tue, Apr 04, 2006 at 05:18:28PM +0800,
 Xianwen Chen <apple45 <at> gmail.com> wrote 
 a message of 11 lines which said:

> Some of my PHP scripts are incoded with Zend.

That is bad.

> I need to install Zend decode support for PHP.However,I only found
> Zend Optimizer fo FreeBSD.I cann't install it.What should I do?

You should use only free software. Zend is precisely engineered to
make things difficult for you. Stay away from it.

Luc DESFOSSES | 5 Apr 01:36 2006
Picon

trying to compile firefox with pkgsrc and xorg

Hie everybody,  

I'm trying to compile firefox via pkgsrc,  
I'm in /usr/pkgsrc/www/firefox and i type make. 

I got this return after some compilation. 

: undefined reference to `__extendsfdf2' 
make[6]: *** [xpt_dump] Error 1 
make[6]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom/typelib/xpt/tools' 
make[5]: *** [export] Error 2 
make[5]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom/typelib/xpt/tools' 
make[4]: *** [export] Error 2 
make[4]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom/typelib/xpt' 
make[3]: *** [export] Error 2 
make[3]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom/typelib' 
make[2]: *** [export] Error 2 
make[2]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom' 
make[1]: *** [tier_2] Error 2 
make[1]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla' 
gmake: *** [default] Error 2 
*** Error code 2 

Stop. 
make: stopped in /usr/pkgsrc/www/firefox 
===> 
===> There was an error during the ``build'' phase. 
===> Please investigate the following for more information: 
===>      * log of the build 
===>      * /usr/pkgsrc/www/firefox/work/.work.log 
(Continue reading)

MladenS | 4 Apr 21:12 2006
Picon

Hello!

Hi!
I just want to know.....
Is SB Audigy 1 supported in latest stable release of NetBSD-NetBSD 3.0?
Also-mount of UDF fs.....
Thanks in a advance!
Bye!

Jonathan A. Kollasch | 5 Apr 09:21 2006
Picon

Re: trying to compile firefox with pkgsrc and xorg

On Wed, Apr 05, 2006 at 01:36:20AM +0200, Luc DESFOSSES wrote:
> Hie everybody,  
>  
> I'm trying to compile firefox via pkgsrc,  
> I'm in /usr/pkgsrc/www/firefox and i type make. 
>  
> I got this return after some compilation. 
>  

What command failed ?

> : undefined reference to `__extendsfdf2' 
> make[6]: *** [xpt_dump] Error 1 
> make[6]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom/typelib/xpt/tools' 
> make[5]: *** [export] Error 2 
> make[5]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom/typelib/xpt/tools' 
> make[4]: *** [export] Error 2 
> make[4]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom/typelib/xpt' 
> make[3]: *** [export] Error 2 
> make[3]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom/typelib' 
> make[2]: *** [export] Error 2 
> make[2]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla/xpcom' 
> make[1]: *** [tier_2] Error 2 
> make[1]: Leaving directory `/usr/pkgsrc/www/firefox/work/mozilla' 
> gmake: *** [default] Error 2 
> *** Error code 2 
>  
> Stop. 
> make: stopped in /usr/pkgsrc/www/firefox 
> ===> 
(Continue reading)

Xianwen Chen | 5 Apr 09:32 2006
Picon

How to delete a non-empty directory?

How to delete a non-empty directory?

--
Xianwen Chen
College Of Economics And Trades,Shanghai Fishiries University
Shanghai,China
086-21-68022471
apple45 <at> gmail.com

Jukka Marin | 5 Apr 09:33 2006
Picon

Re: How to delete a non-empty directory?

On Wed, Apr 05, 2006 at 03:32:03PM +0800, Xianwen Chen wrote:
> How to delete a non-empty directory?

rm -rf dirname

  -jm


Gmane