FreeBSD bugmaster | 17 Jun 2013 13:06
Picon
Favicon

freebsd-embedded@...

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/177878  embedded   [rtl8366rb] [patch] Update rtl8366rb switch driver to 
o bin/177873   embedded   [patch] etherswitchcfg(): Change the per port vlangrou
o bin/177872   embedded   [patch] etherswitchcfg(8) crashes if called with no ar
o bin/177871   embedded   [patch] etherswitchcfg(8): uninitialized variable whil
o kern/172968  embedded   [arge] probe/attach occasionally fails to find a PHY
o misc/52256   embedded   [picobsd] picobsd build script does not read in user/s
o kern/42728   embedded   [picobsd] many problems in src/usr.sbin/ppp/*  after c

7 problems total.

Antonio Buonanno | 15 Jun 2013 16:47
Picon

freebsd + raspberry pi + zigbee


hi to all and thanks for all , this i am a newbie for freebsd system and i ask you this question:

i wont use a raspberry pi, do you telle me a good book, how-to or other can use freebsd with raspberry pi?
do you now if i can use  ZigBee USB Stick with  freebsd  and raspbarry pi, do you think i have a problem?

best regads
Antonio
 		 	   		  
Luiz Otavio O Souza | 13 Jun 2013 16:41
Picon

arswitch vlan support

Hello,

I've been working for a while to support vlans management on arswitch and
the result seems to work quite well.

I'd to change etherswitchcfg(8) again to better support port based vlans
setups.

There was a bug in arswitch_writereg() where the lsb/msb parts were written
in the wrong order and that was causing all kinds of instability. Fixing
that allows me to bring back the page code (which only change the switch
register page when needed) and also remove some previous workarounds.

Here are the patches (and urls if the list eat them):

http://loos.no-ip.org/switch/001-etherswitch-vid-valid.diff

Adds a flag to tell to etherswitch consumers when a vlangroup is valid (in
use, even when there are no members on the vlangroup).

http://loos.no-ip.org/switch/002-ip17x-vid-valid.diff

Add the support to report valid vlans and fix a few bugs (don't allow
change the vlan when working in port based vlan mode, don't allow setup the
same vlan id on different vlangroups).

Tested on RB433U (IP175D) and an old RB450 (IP1757C).

http://loos.no-ip.org/switch/003-rtl8366rb-vid-valid.diff

(Continue reading)

FreeBSD bugmaster | 10 Jun 2013 13:06
Picon
Favicon

freebsd-embedded@...

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/177878  embedded   [rtl8366rb] [patch] Update rtl8366rb switch driver to 
o bin/177873   embedded   [patch] etherswitchcfg(): Change the per port vlangrou
o bin/177872   embedded   [patch] etherswitchcfg(8) crashes if called with no ar
o bin/177871   embedded   [patch] etherswitchcfg(8): uninitialized variable whil
o kern/172968  embedded   [arge] probe/attach occasionally fails to find a PHY
o misc/52256   embedded   [picobsd] picobsd build script does not read in user/s
o kern/42728   embedded   [picobsd] many problems in src/usr.sbin/ppp/*  after c

7 problems total.

Adrian Chadd | 8 Jun 2013 22:26
Picon

etherswitch regression?

Hi guys,

I've noticed this regression:

# etherswitchcfg
etherswitchcfg: ioctl(IOETHERSWITCHGETINFO): Inappropriate ioctl for device

Is this just a userland mismatch? or?

adrian
Nigel Williams | 4 Jun 2013 10:39
Picon
Picon
Favicon

No usable event timer, FreeBSD Current, PCEngines WRAP

Hi,

I'm attempting to run FreeBSD-10 CURRENT (built using nanoBSD) on a 
PC-Engines WRAP device, and encounter the following during boot: "panic: 
No usable event timer found!" after which the machine reboots. I have 
been able to run pfSense 2.0.1 (bsd 8.1) and it appears to find the 
i8254 timer.

The verbose boot output:
https://docs.google.com/file/d/0B9KWjvUN8efvQ0RMNXRzRS1rS0k/edit?usp=sharing

Kernel conf:
https://docs.google.com/file/d/0B9KWjvUN8efvLUpRekJORWhmSFE/edit?usp=sharing

nanoBSD conf:
https://docs.google.com/file/d/0B9KWjvUN8efvTzIya3pNUXc5elk/edit?usp=sharing

any suggestions?

cheers,
nigel
FreeBSD bugmaster | 3 Jun 2013 13:06
Picon
Favicon

freebsd-embedded@...

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/177878  embedded   [rtl8366rb] [patch] Update rtl8366rb switch driver to 
o bin/177873   embedded   [patch] etherswitchcfg(): Change the per port vlangrou
o bin/177872   embedded   [patch] etherswitchcfg(8) crashes if called with no ar
o bin/177871   embedded   [patch] etherswitchcfg(8): uninitialized variable whil
o kern/172968  embedded   [arge] probe/attach occasionally fails to find a PHY
o misc/52256   embedded   [picobsd] picobsd build script does not read in user/s
o kern/42728   embedded   [picobsd] many problems in src/usr.sbin/ppp/*  after c

7 problems total.

FreeBSD bugmaster | 27 May 2013 13:06
Picon
Favicon

freebsd-embedded@...

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/177878  embedded   [rtl8366rb] [patch] Update rtl8366rb switch driver to 
o bin/177873   embedded   [patch] etherswitchcfg(): Change the per port vlangrou
o bin/177872   embedded   [patch] etherswitchcfg(8) crashes if called with no ar
o bin/177871   embedded   [patch] etherswitchcfg(8): uninitialized variable whil
o kern/172968  embedded   [arge] probe/attach occasionally fails to find a PHY
o misc/52256   embedded   [picobsd] picobsd build script does not read in user/s
o kern/42728   embedded   [picobsd] many problems in src/usr.sbin/ppp/*  after c

7 problems total.

FreeBSD bugmaster | 20 May 2013 13:06
Picon
Favicon

freebsd-embedded@...

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/177878  embedded   [rtl8366rb] [patch] Update rtl8366rb switch driver to 
o bin/177873   embedded   [patch] etherswitchcfg(): Change the per port vlangrou
o bin/177872   embedded   [patch] etherswitchcfg(8) crashes if called with no ar
o bin/177871   embedded   [patch] etherswitchcfg(8): uninitialized variable whil
o kern/172968  embedded   [arge] probe/attach occasionally fails to find a PHY
o misc/52256   embedded   [picobsd] picobsd build script does not read in user/s
o kern/42728   embedded   [picobsd] many problems in src/usr.sbin/ppp/*  after c

7 problems total.

FreeBSD bugmaster | 13 May 2013 13:06
Picon
Favicon

freebsd-embedded@...

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/177878  embedded   [rtl8366rb] [patch] Update rtl8366rb switch driver to 
o bin/177873   embedded   [patch] etherswitchcfg(): Change the per port vlangrou
o bin/177872   embedded   [patch] etherswitchcfg(8) crashes if called with no ar
o bin/177871   embedded   [patch] etherswitchcfg(8): uninitialized variable whil
o kern/172968  embedded   [arge] probe/attach occasionally fails to find a PHY
o misc/52256   embedded   [picobsd] picobsd build script does not read in user/s
o kern/42728   embedded   [picobsd] many problems in src/usr.sbin/ppp/*  after c

7 problems total.

FreeBSD bugmaster | 6 May 2013 13:06
Picon
Favicon

freebsd-embedded@...

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/177878  embedded   [rtl8366rb] [patch] Update rtl8366rb switch driver to 
o bin/177873   embedded   [patch] etherswitchcfg(): Change the per port vlangrou
o bin/177872   embedded   [patch] etherswitchcfg(8) crashes if called with no ar
o bin/177871   embedded   [patch] etherswitchcfg(8): uninitialized variable whil
o kern/172968  embedded   [arge] probe/attach occasionally fails to find a PHY
o misc/52256   embedded   [picobsd] picobsd build script does not read in user/s
o kern/42728   embedded   [picobsd] many problems in src/usr.sbin/ppp/*  after c

7 problems total.


Gmane