libnc-dap3 updated

I've finally gone ahead and committed nco and its updated versioned 
dependencies to 10.4/unstable.  Because libnc-dap3 didn't have an 
install_name change, I didn't create a new package name for the updated 
version.  However, I did leave the prior version (3.5.2-1001) available, 
in case of upgrade issues. 

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

scipy-py25 ranlib error

I'm getting a g95 ranlib error when scipy-p25 builds, requiring

sudo ranlib  /sw/bin/../lib/gcc-lib/i386-apple-darwin8/4.0.3// 
libgcc_eh.a

William G. Scott

contact info:  http://chemistry.ucsc.edu/~wgscott

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Problem with pidgin package on the tracker

The validation error is as follows:

Validating .deb dir root-pidgin-2.1.0-1...
Error: File installed outside of allowable subdirectories of /sw
        Offending file: /sw/System/
        Offending file: /sw/System/Library/
        Offending file: /sw/System/Library/Perl/
        Offending file: /sw/System/Library/Perl/5.8.6/
        Offending file: 
/sw/System/Library/Perl/5.8.6/darwin-thread-multi-2level/
        Offending file: 
/sw/System/Library/Perl/5.8.6/darwin-thread-multi-2level/perllocal.pod
Removing runtime build-lock...

I've posted a build log:

http://akhmac.blogdns.net/~hansen/finklogs/fink-build-log_pidgin_2.1.0-1_2007.09.02-21.11.54

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Re: Problem with pidgin package on the tracker

Alexander K. Hansen wrote:
> The validation error is as follows:
>
> Validating .deb dir root-pidgin-2.1.0-1...
> Error: File installed outside of allowable subdirectories of /sw
>         Offending file: /sw/System/
>         Offending file: /sw/System/Library/
>         Offending file: /sw/System/Library/Perl/
>         Offending file: /sw/System/Library/Perl/5.8.6/
>         Offending file: 
> /sw/System/Library/Perl/5.8.6/darwin-thread-multi-2level/
>         Offending file: 
> /sw/System/Library/Perl/5.8.6/darwin-thread-multi-2level/perllocal.pod
> Removing runtime build-lock...
>
> I've posted a build log:
>
> http://akhmac.blogdns.net/~hansen/finklogs/fink-build-log_pidgin_2.1.0-1_2007.09.02-21.11.54
>
>   
Forgot to post a link to the tracker item:

http://sourceforge.net/tracker/index.php?func=detail&aid=1773187&group_id=17203&atid=414256

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Re: scipy-py25 ranlib error

Please just ignore this.  I think it was a red herring.  It was fine
on my other machines.

Sorry.

Bill

On Sat, 1 Sep 2007, William Scott wrote:

     I'm getting a g95 ranlib error when scipy-p25 builds, requiring

     sudo ranlib  /sw/bin/../lib/gcc-lib/i386-apple-darwin8/4.0.3// 
     libgcc_eh.a

     
     William G. Scott

     contact info:  http://chemistry.ucsc.edu/~wgscott

     

     

     

     ------------------------------

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.

Re: Problem with pidgin package on the tracker

Alexander K. Hansen wrote:
> Alexander K. Hansen wrote:
>> The validation error is as follows:
>>
>> Validating .deb dir root-pidgin-2.1.0-1...
>> Error: File installed outside of allowable subdirectories of /sw
>>         Offending file: /sw/System/
>>         Offending file: /sw/System/Library/
>>         Offending file: /sw/System/Library/Perl/
>>         Offending file: /sw/System/Library/Perl/5.8.6/
>>         Offending file: 
>> /sw/System/Library/Perl/5.8.6/darwin-thread-multi-2level/
>>         Offending file: 
>> /sw/System/Library/Perl/5.8.6/darwin-thread-multi-2level/perllocal.pod
>> Removing runtime build-lock...

What the InstallScript could do:

1. cp the /sw/System/.../perllocal.pod to 
%i/share/podfiles/perllocal-pidgin.pod
2. rm -rf %i/System

And set UpdatePodfiles: Yes. Or does this only work for Type: perl?

>> I've posted a build log:
>>
>> http://akhmac.blogdns.net/~hansen/finklogs/fink-build-log_pidgin_2.1.0-1_2007.09.02-21.11.54

What I'd more worry about are the many "No"s in the configure summary. 
In particular:

GMANE Message Loss

Gmane has a server hiccup a week or so ago. They're healed, but some
mailing-list messages may have gotten lost from their archive from
during their downtime, and others from then might be arriving on their
news-server out-of-order. Sourceforge was not plagued here, so you'll
probably only notice or care if you use gmane's interfaces to the
mailing lists.  That is, users <-> lists.sf is okay, but lists.sf ->
gmane oops'ed.

dan

--

-- 
Daniel Macks
dmacks <at> netspace.org
http://www.netspace.org/~dmacks

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Re: Problem with pidgin package on the tracker

Thanks, Alex, Martin,

>>>         Offending file:
>>> /sw/System/Library/Perl/5.8.6/darwin-thread-multi-2level/perllocal.pod
>>> Removing runtime build-lock...
>
> What the InstallScript could do:
>
> 1. cp the /sw/System/.../perllocal.pod to
> %i/share/podfiles/perllocal-pidgin.pod
> 2. rm -rf %i/System
>
> And set UpdatePodfiles: Yes. Or does this only work for Type: perl?

Not sure, hopefully womeone better versed in the perl-isms can chime in.
Would these installed perl files be a suitablefor splitting off a -pm 
perl module?

>>> I've posted a build log:
>>>
>>> http://akhmac.blogdns.net/~hansen/finklogs/fink-build-log_pidgin_2.1.0-1_2007.09.02-21.11.54
>
> What I'd more worry about are the many "No"s in the configure summary.
> In particular:
>
>> Build with D-Bus support...... : no
>> SSL Library/Libraries......... : None (MSN and Google Talk will not work without SSL!)
>> Build with Tk support......... : no
>
> shouldn't be there IMHO.

packaging a kext?

Hi,

I'm preparing a package for vpnc (http://www.unix-ag.uni-kl.de/ 
~massar/vpnc/) which depends on tuntap (http://www-user.rhrk.uni- 
kl.de/~nissler/tuntap/).

I'm struggling to package the tuntap kext correctly, i.e., install  
the kext such that everything is in the correct place and the kext  
loads at boot time. The packaging tutorial is silent on how to do  
this - can anyone give me some pointers?

Thanks,
Lars

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

_______________________________________________
Fink-devel mailing list
Fink-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/fink-devel

Re: packaging a kext?

Lars Eggert wrote:
> Hi,
>
> I'm preparing a package for vpnc 
> (http://www.unix-ag.uni-kl.de/~massar/vpnc/) which depends on tuntap 
> (http://www-user.rhrk.uni-kl.de/~nissler/tuntap/).
>
> I'm struggling to package the tuntap kext correctly, i.e., install the 
> kext such that everything is in the correct place and the kext loads 
> at boot time. The packaging tutorial is silent on how to do this - can 
> anyone give me some pointers?
>
> Thanks,
> Lars
>

Check out the fuse package.  That's the only other kext-using package 
that I know of.

--

-- 
Alexander K. Hansen
Fink User Liaison/Documenter
akh AT finkproject DOT org

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/