Hi All,

I am using V1.3.8 and when setting port in options to 4900 and 4800 and use the Apply button it works okay.

However, when I then click on the Okay button the settings are lost and returned to the default 5900 and 5800

Anyone else had this problem and found a fix as I really need to use an alternative port to 5900 and 5800 as I have two computers behind a router and one is using 5900 WinVNC and I was wanting to use 4900 for TightVNC.

I suppose I could try 5901 or something higher for the second pc.

Regards.

John

This e-mail and files transmitted with it are privileged and confidential information
intended for the use of the addressee. The confidentiality and/or privilege in this e-mail is
not waived, lost or destroyed if it has been transmitted to you in error. If you received this
e-mail in error you must
(a) not disseminate, copy or take any action in reliance on it;
(b) please notify the Department of Agriculture and Food, WA immediately by return e-mail to the sender;
(c) please delete the original e-mail.

This email has been successfully scanned by
McAfee Anti-Virus software.
Department of Agriculture and Food WA

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
___________________________________________________________
TightVNC mailing list, VNC-Tight-list <at> lists.sourceforge.net
To change your subscription or to UNSUBSCRIBE, please visit
https://lists.sourceforge.net/lists/listinfo/vnc-tight-list

Thanks Brian it worked a treat.

Strange how the two methods don't work the same.

The presentations for both Properties and Administration Default Settings look exactly the same.

I guess there could be a reason why the properties one only temporarily maintains the port setting over the Administration Default Settings but it certainly fazes one whom does not know.

Regards.

John

----------
From:   Brian Duke[SMTP:bpduke <at> gmail.com ]
Sent:   Tuesday, 6 March 2007 10:34 PM
To:     Wall, John
Cc:     vnc-tight-list <at> lists.sourceforge.net
Subject:        Re: TightVNC V1.3.8 Port Change doesn't hold - XP SP2

I have had similar problems with the password. May not be related, but try this. Go to Start->Programs->TightVNC->Administration->Show Default Settings and make sure your ports are set there as well.




On 3/6/07, Wall, John < JWall <at> agric.wa.gov.au <mailto:JWall <at> agric.wa.gov.au>> wrote:

Hi All,

I am using V1.3.8 and when setting port in options to 4900 and 4800 and use the Apply button it works okay.

However, when I then click on the Okay button the settings are lost and returned to the default 5900 and 5800

Anyone else had this problem and found a fix as I really need to use an alternative port to 5900 and 5800 as I have two computers behind a router and one is using 5900 WinVNC and I was wanting to use 4900 for TightVNC.

I suppose I could try 5901 or something higher for the second pc.

Regards.

John





  _____ 

This e-mail and files transmitted with it are privileged and confidential information
intended for the use of the addressee. The confidentiality and/or privilege in this e-mail is
not waived, lost or destroyed if it has been transmitted to you in error. If you received this
e-mail in error you must
(a) not disseminate, copy or take any action in reliance on it;
(b) please notify the Department of Agriculture and Food, WA immediately by return e-mail to the sender;
(c) please delete the original e-mail.

This email has been successfully scanned by
McAfee Anti-Virus software.
Department of Agriculture and Food WA






-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
< http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV>
___________________________________________________________
TightVNC mailing list, VNC-Tight-list <at> lists.sourceforge.net <mailto:VNC-Tight-list <at> lists.sourceforge.net >
To change your subscription or to UNSUBSCRIBE, please visit
<https://lists.sourceforge.net/lists/listinfo/vnc-tight-list >

This e-mail and files transmitted with it are privileged and confidential information
intended for the use of the addressee. The confidentiality and/or privilege in this e-mail is
not waived, lost or destroyed if it has been transmitted to you in error. If you received this
e-mail in error you must
(a) not disseminate, copy or take any action in reliance on it;
(b) please notify the Department of Agriculture and Food, WA immediately by return e-mail to the sender;
(c) please delete the original e-mail.

This email has been successfully scanned by
McAfee Anti-Virus software.
Department of Agriculture and Food WA

Thanks Brian it worked a treat.

Strange how the two methods don't work the same.

The presentations for both Properties and Administration Default Settings look exactly the same.

I guess there could be a reason why the properties one only temporarily maintains the port setting over the Administration Default Settings but it certainly fazes one whom does not know.

Regards.

John

----------
From:   Brian Duke[SMTP:bpduke <at> gmail.com ]
Sent:   Tuesday, 6 March 2007 10:34 PM
To:     Wall, John
Cc:     vnc-tight-list <at> lists.sourceforge.net
Subject:        Re: TightVNC V1.3.8 Port Change doesn't hold - XP SP2

I have had similar problems with the password. May not be related, but try this. Go to Start->Programs->TightVNC->Administration->Show Default Settings and make sure your ports are set there as well.




On 3/6/07, Wall, John < JWall <at> agric.wa.gov.au <mailto:JWall <at> agric.wa.gov.au>> wrote:

Hi All,

I am using V1.3.8 and when setting port in options to 4900 and 4800 and use the Apply button it works okay.

However, when I then click on the Okay button the settings are lost and returned to the default 5900 and 5800

Anyone else had this problem and found a fix as I really need to use an alternative port to 5900 and 5800 as I have two computers behind a router and one is using 5900 WinVNC and I was wanting to use 4900 for TightVNC.

I suppose I could try 5901 or something higher for the second pc.

Regards.

John





  _____ 

This e-mail and files transmitted with it are privileged and confidential information
intended for the use of the addressee. The confidentiality and/or privilege in this e-mail is
not waived, lost or destroyed if it has been transmitted to you in error. If you received this
e-mail in error you must
(a) not disseminate, copy or take any action in reliance on it;
(b) please notify the Department of Agriculture and Food, WA immediately by return e-mail to the sender;
(c) please delete the original e-mail.

This email has been successfully scanned by
McAfee Anti-Virus software.
Department of Agriculture and Food WA






-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
< http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV>
___________________________________________________________
TightVNC mailing list, VNC-Tight-list <at> lists.sourceforge.net <mailto:VNC-Tight-list <at> lists.sourceforge.net >
To change your subscription or to UNSUBSCRIBE, please visit
<https://lists.sourceforge.net/lists/listinfo/vnc-tight-list >

This e-mail and files transmitted with it are privileged and confidential information
intended for the use of the addressee. The confidentiality and/or privilege in this e-mail is
not waived, lost or destroyed if it has been transmitted to you in error. If you received this
e-mail in error you must
(a) not disseminate, copy or take any action in reliance on it;
(b) please notify the Department of Agriculture and Food, WA immediately by return e-mail to the sender;
(c) please delete the original e-mail.

This email has been successfully scanned by
McAfee Anti-Virus software.
Department of Agriculture and Food WA

Hello,

 

I am new to the VNC forum and recently received your emails. Please allow me to ask a question concerning the passwords. They do not seem to work as I expected, and from your comments, I inferred that you may have been having the same issue, which is that the passwords do not seem to "stick". Will you please direct me to where I can learn more about this?

 

thank you,

Terry Ford

 

 

 

 

 -tight-list-bounces <at> lists.sourceforge.net [mailto:vnc-tight-list-bounces <at> lists.sourceforge.net] On Behalf Of Brian Duke
Sent: Tuesday, March 06, 2007 7:55 PM

To: Wall, John
Cc: vnc-tight-list <at> lists.sourceforge.net
Subject: Re: TightVNC V1.3.8 Port Change doesn't hold - XP SP2

No problem, glad it worked. It took me awhile to figure out why my passwords wouldn't stick also, but other than that the software has always worked great for me.

On 3/6/07, Wall, John <JWall <at> agric.wa.gov.au> wrote:

Thanks Brian it worked a treat.

Strange how the two methods don't work the same.

The presentations for both Properties and Administration Default Settings look exactly the same.

I guess there could be a reason why the properties one only temporarily maintains the port setting over the Administration Default Settings but it certainly fazes one whom does not know.

Regards.

John

----------
From:   Brian Duke[ SMTP:bpduke <at> gmail.com ]
Sent:   Tuesday, 6 March 2007 10:34 PM
To:     Wall, John
Cc:     vnc-tight-list <at> lists.sourceforge.net
Subject:        Re: TightVNC V1.3.8 Port Change doesn't hold - XP SP2

I have had similar problems with the password. May not be related, but try this. Go to Start->Programs->TightVNC->Administration->Show Default Settings and make sure your ports are set there as well.




On 3/6/07, Wall, John < JWall <at> agric.wa.gov.au <mailto:JWall <at> agric.wa.gov.au>> wrote:

Hi All,

I am using V1.3.8 and when setting port in options to 4900 and 4800 and use the Apply button it works okay.

However, when I then click on the Okay button the settings are lost and returned to the default 5900 and 5800

Anyone else had this problem and found a fix as I really need to use an alternative port to 5900 and 5800 as I have two computers behind a router and one is using 5900 WinVNC and I was wanting to use 4900 for TightVNC.

I suppose I could try 5901 or something higher for the second pc.

Regards.

John





  _____ 

This e-mail and files transmitted with it are privileged and confidential information
intended for the use of the addressee. The confidentiality and/or privilege in this e-mail is
not waived, lost or destroyed if it has been transmitted to you in error. If you received this
e-mail in error you must
(a) not disseminate, copy or take any action in reliance on it;
(b) please notify the Department of Agriculture and Food, WA immediately by return e-mail to the sender;
(c) please delete the original e-mail.

This email has been successfully scanned by
McAfee Anti-Virus software.
Department of Agriculture and Food WA






-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
< http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV>
___________________________________________________________
TightVNC mailing list, VNC-Tight-list <at> lists.sourceforge.net <mailto:VNC-Tight-list <at> lists.sourceforge.net >
To change your subscription or to UNSUBSCRIBE, please visit
< https://lists.sourceforge.net/lists/listinfo/vnc-tight-list >

This e-mail and files transmitted with it are privileged and confidential information
intended for the use of the addressee. The confidentiality and/or privilege in this e-mail is
not waived, lost or destroyed if it has been transmitted to you in error. If you received this
e-mail in error you must
(a) not disseminate, copy or take any action in reliance on it;
(b) please notify the Department of Agriculture and Food, WA immediately by return e-mail to the sender;
(c) please delete the original e-mail.

This email has been successfully scanned by
McAfee Anti-Virus software.
Department of Agriculture and Food WA