Westlake, Simon | 6 Sep 15:11 2006

HPing Probe

Hi,

A few weeks ago, someone posted an HPing probe to this list. I thought
I'd saved the email, but apparently not. Doesn't seem to be available on
the Smokeping site either. Could the author please resend the original
email to me?

Sorry!

--
Simon Westlake
Time Warner Cable Business Class
Network Engineer
Ph: 414.908.4791 | Cell: 414.688.7956

-----------------------------------------
This E-mail and any of its attachments may contain Time Warner
Cable proprietary information, which is privileged, confidential,
or subject to copyright belonging to Time Warner Cable. This E-mail
is intended solely for the use of the individual or entity to which
it is addressed. If you are not the intended recipient of this
E-mail, you are hereby notified that any dissemination,
distribution, copying, or action taken in relation to the contents
of and attachments to this E-mail is strictly prohibited and may be
unlawful. If you have received this E-mail in error, please notify
the sender immediately and permanently delete the original and any
copy of this E-mail and any printout.

Niko Tyni | 6 Sep 20:31 2006
Picon
Picon

Re: HPing Probe

On Wed, Sep 06, 2006 at 09:11:10AM -0400, Westlake, Simon wrote:

> A few weeks ago, someone posted an HPing probe to this list. I thought
> I'd saved the email, but apparently not. Doesn't seem to be available on
> the Smokeping site either. Could the author please resend the original
> email to me?

Hi,

it's still in the mailing list archives:

http://lists.ee.ethz.ch/smokeping-users/msg01978.html

which points to

http://lists.ee.ethz.ch/p/HPing.pm

Cheers,
--

-- 
Niko

DANIEL MAGNUSZEWSKI | 6 Sep 22:39 2006

Re: CiscoRTTMonEchoICMP Configuration/Setup...

One more question...

If I want to start alerting and sending traps based on thresholds, how
would I go about setting that up? Even if you can point me in the right
direction, I'd appreciate it.

Thanks!

-Dan

>>> "DANIEL MAGNUSZEWSKI" <dmagnuszewski <at> mandtbank.com> 08/23/06 11:50
AM >>>
That's it! Thanks!

-Dan

>>> "Klaus Kastens" <kka <at> netuse.de> 08/23/06 11:02 AM >>>
Hello Daniel,

On Wed, 23 Aug 2006 10:06 -0400, DANIEL MAGNUSZEWSKI wrote:
> I forgot to mention that I am running Smokeping version 1.38

Sorry, I simpy assumed you were using Smokeping 2.x.
In 1.x the configuration syntax is different, ioshost was
configured per "target" in an additional PROBE_CONF section,
not sure if is possible to set this in the "probes" configuration.

Here is an excerpt of a working 1.43 conf with default FPing:

*** Probes ***
(Continue reading)

Tobias Oetiker | 6 Sep 22:45 2006
Picon

Re: CiscoRTTMonEchoICMP Configuration/Setup...

Hi Daniel,

you have to configure the Alerts section and thenn specify which
alerts you want for your probes ...

make sure you use smokeping 2.x and not some old 1.x version ...
it has gotten much better

cheers
tobi

Today DANIEL MAGNUSZEWSKI wrote:

> One more question...
>
> If I want to start alerting and sending traps based on thresholds, how
> would I go about setting that up? Even if you can point me in the right
> direction, I'd appreciate it.
>
> Thanks!
>
> -Dan
>
> >>> "DANIEL MAGNUSZEWSKI" <dmagnuszewski <at> mandtbank.com> 08/23/06 11:50
> AM >>>
> That's it! Thanks!
>
> -Dan
>
> >>> "Klaus Kastens" <kka <at> netuse.de> 08/23/06 11:02 AM >>>
(Continue reading)

Jonathan TSE Chi Hang | 7 Sep 06:15 2006

Re: small patch to let configure fping source IP

Hi,

Thanks Cougar pionnering this. Smokeping version 2 probably fulfill our
wishes. I am using:

1) fping-2.4b2_to.tar.gz with the patch from
http://wiki.version6.net/Patches

2) smokeping-2.0.9.tar.gz with the following patch:

=============== start of patch ===============
# diff FPing.pm FPing.pm.org
44,47d43
<
< The (optional) B<source> option lets you configure the source IP
address
< for the pings sent.
<
114d109
<     push  <at> params, "-I $self->{properties}{source}" if
$self->{properties}{source};
198,212d192
<               source => {
<                       _re => '\d+\.\d+\.\d+\.\d+',
<                       _example => 127.0.0.1,
<                       _default => 203.117.82.3,
<                       _sub => sub {
<                               my ($ip) =  <at> _;
<                               return "ERROR: FPing wrong ip address
$ip"
(Continue reading)

Evert Meulie | 7 Sep 12:11 2006

2 columns possible?

Hi all!

I now have a group where 16 smokeping graphs show in a list. How do I
get this grouped in 2 columns?

Regards,
  Evert

DANIEL MAGNUSZEWSKI | 7 Sep 15:46 2006

Re: CiscoRTTMonEchoICMP Configuration/Setup...

Thanks.

Are there any known issues of upgrading from version 1.38 to 2.x?

-Dan

>>> "Tobias Oetiker" <tobi <at> oetiker.ch> 09/06/06 4:45 PM >>>
Hi Daniel,

you have to configure the Alerts section and thenn specify which
alerts you want for your probes ...

make sure you use smokeping 2.x and not some old 1.x version ...
it has gotten much better

cheers
tobi

Today DANIEL MAGNUSZEWSKI wrote:

> One more question...
>
> If I want to start alerting and sending traps based on thresholds,
how
> would I go about setting that up? Even if you can point me in the
right
> direction, I'd appreciate it.
>
> Thanks!
>
(Continue reading)

Tobias Oetiker | 7 Sep 17:54 2006
Picon

Re: CiscoRTTMonEchoICMP Configuration/Setup...

Hi Daniel,

for upgrading, make sure you read:

http://oss.oetiker.ch/smokeping/doc/smokeping_upgrade.en.html

cheers
tobi

--

-- 
Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten
http://tobi.oetiker.ch tobi <at> oetiker.ch ++41 62 213 9902

Mersberger, Robert | 7 Sep 18:02 2006

Re: CiscoRTTMonEchoICMP Configuration/Setup...

Cannot open the attached site

-----Original Message-----
From: smokeping-users-bounce <at> list.ee.ethz.ch
[mailto:smokeping-users-bounce <at> list.ee.ethz.ch] On Behalf Of Tobias
Oetiker
Sent: Thursday, September 07, 2006 10:54 AM
To: DANIEL MAGNUSZEWSKI
Cc: smokeping-users <at> list.ee.ethz.ch
Subject: [smokeping-users] Re: CiscoRTTMonEchoICMP
Configuration/Setup...

Hi Daniel,

for upgrading, make sure you read:

http://oss.oetiker.ch/smokeping/doc/smokeping_upgrade.en.html

cheers
tobi

--

-- 
Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten
http://tobi.oetiker.ch tobi <at> oetiker.ch ++41 62 213 9902

--
Unsubscribe
mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://lists.ee.ethz.ch/smokeping-users
(Continue reading)

mchandler | 7 Sep 18:20 2006
Picon

Re: CiscoRTTMonEchoICMP Configuration/Setup...


It times out regularly for me too.  Just hit refresh.

Mel Chandler, A+, Network+, MCSE, MCDBA, Master CNE, CCNA
Network Engineer
Information Technology
Canon Business Solutions
(310) 217-3893

GCS d--- s+: a C++ UL++++ P+ L++ E W+++ N++ o+ K- w+
O- M-- V- PS PE+ Y+ PGP+ t+ 5+ X+ R tv+ b- DI++++ D++
G e++ h-- r y+

                                                                           
             "Mersberger,                                                  
             Robert"                                                       
             <Robert_Mersberge                                          To 
             r <at> BeverlyCorp.com         "Tobias Oetiker" <tobi <at> oetiker.ch>, 
             >                         "DANIEL MAGNUSZEWSKI"               
             Sent by:                  <dmagnuszewski <at> mandtbank.com>       
             smokeping-users-b                                          cc 
             ounce <at> list.ee.eth         <smokeping-users <at> list.ee.ethz.ch>   
             z.ch                                                  Subject 
                                       [smokeping-users] Re:               
                                       CiscoRTTMonEchoICMP                 
             09/07/2006 09:02          Configuration/Setup...              
             AM                                                            

Cannot open the attached site

(Continue reading)


Gmane