Zeeshan Ahmed | 1 Apr 15:15 2003
Picon
Subject: ./simg

./simg

Dear all
    while configuring the smokeping configuration file i amnot able to understant what is this .simg
directory will it be created automatically or so i need to creat it?
++++++++++
imgcache ?
imgurl ?
+++++++++
--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Zeeshan Ahmed | 1 Apr 16:03 2003
Picon

cgi line 7 error

Dear all
i am asking this 2nd time, why i am getting these erros, is ther any permissions problem????? Please help me
out from these

Can't locate Smokeping.pm in  <at> INC ( <at> INC contains: /home/zeeshan/smokeping/lib/
/usr/local/rrdtool-1.0.33/lib/perl/ /usr/lib/perl5/5.6.1/i386-linux /usr/lib/perl5/5.6.1
/usr/lib/perl5/site_perl/5.6.1/i386-inux /usr/lib/perl5/site_perl/5.6.1
/usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.6.1/i386-linux /usr/lib/perl5/vendor_perl/5.6.1
/usr/lib/perl5/vendor_perl .) at /var/www/cgi-bin/smokeping.cgi line 7.
BEGIN failed--compilation aborted at /var/www/cgi-bin/smokeping.cgi line 7.
speedy_backend[14477]: perl_parse error
speedy[14475]: Cannot spawn backend process
[Tue Apr  1 18:48:03 2003] [error] [client xx.xxx.xxx.xx] Premature end of script headers: /var/www/cgi-bin/smokeping.cgi
--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Brett Marler | 2 Apr 12:33 2003
Picon

Re: cgi line 7 error

Zeeshan,
> i am asking this 2nd time, why i am getting these erros, is ther any permissions
> problem????? Please help me out from these
I did respond to your first e-mail, with some pointers about reading Tobi's 
installation guide. I have no idea if you have done this or not, have you 
actually got around to installing the Speedy:CGI perl module? If not, read 
Tobi's installation guide.

> Can't locate Smokeping.pm in  <at> INC ( <at> INC contains: /home/zeeshan/smokeping/lib/ 
<(snip)
I would say Smokeping cannot gain access to the Perl modules it needs. Yes, I 
would say this is a permission issue. I have no idea what version of 
Linux/Unix you are running, if you are running Redhat by default it creates 
permissions of "700" for all home directories. I would suggest moving the 
Smokeping directory to something more conventional like /usr/local or whatever 
takes your fancy. If you cannot do this, try "chmod 777 /home/zeeshan/" and 
work back from there.

But I would suggest reading Tobi's installation guide, it should answer most 
of your questions and verify you have everything you need installed.

Regards.
--

-- 
Brett Marler <brett at asroma.homeip.net>
WWW:	http://asroma.homeip.net/

-- Binary/unsupported file stripped by Ecartis --
-- Err : No filename to use for decode, file stripped.
-- Type: application/pgp-signature

(Continue reading)

Muhammad Talha | 2 Apr 12:56 2003
Picon

Re: cgi line 7 error

Dear all

yes this is permission problem i was having same problem

but after giving  /home/talha 777 permission it worked fine

Regards

Talha
----- Original Message -----
From: "Brett Marler" <brett <at> asroma.homeip.net>
To: "Zeeshan Ahmed" <zeeshan <at> worldcall.net.pk>
Cc: <smokeping-users <at> list.ee.ethz.ch>
Sent: Wednesday, April 02, 2003 3:33 PM
Subject: [smokeping-users] Re: cgi line 7 error

> Zeeshan,
> > i am asking this 2nd time, why i am getting these erros, is ther any
permissions
> > problem????? Please help me out from these
> I did respond to your first e-mail, with some pointers about reading
Tobi's
> installation guide. I have no idea if you have done this or not, have you
> actually got around to installing the Speedy:CGI perl module? If not, read
> Tobi's installation guide.
>
> > Can't locate Smokeping.pm in  <at> INC ( <at> INC contains:
/home/zeeshan/smokeping/lib/
> <(snip)
> I would say Smokeping cannot gain access to the Perl modules it needs.
(Continue reading)

chris | 2 Apr 14:51 2003
Picon

alerts problem

Hi

I am rather new to smokeping. I managed to get it working in no time but I
seem to have a problem in the email alerts. Below is a sample of the
configuration may be somebody can tell me what I am doing wrong

*** Targets ***
menu = test
title = test
host = test.ipstorm.net
alerts =  lossdetect
email = Chris Debono <chris <at> ipstorm.net>

*** Alerts ***
 to = info <at> ipstorm.net
 from = smokealert <at> ipstorm.net

 +lossdetect
 type = loss
 pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20%
 comment = suddenly there is packet loss

Is there something I am missing out?

regards

Chris

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
(Continue reading)

Strina Nicolas | 3 Apr 11:36 2003
Picon

Error with RRD

Hello,

I'm using SmokePing since a week and i have now an error when i launch it.

[root <at> noc rrdtool-1.0.41]# /usr/local/bin/smokeping --debug
### fping seems to report in 1 miliseconds
Launched successfully
FPing: probing 83 targets
ERROR: could not lock RRD

I didn't find any lock file or anything. Someone can give me a clue ?

Regards,

Nicolas

----------------------------------------
STRINA Nicolas
IP Network Engineer
VTX Services - Internet Service Provider
Av. de Lavaux, 101 CH-1009 Pully
nicolas.strina <at> smart-telecom.ch
http://www.vtx.ch
----------------------------------------

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
(Continue reading)

Brett Marler | 3 Apr 12:53 2003
Picon

Re: Error with RRD

Nicolas,
> I didn't find any lock file or anything. Someone can give me a clue ?
The location of the "smokeping.pid" lockfile is actually defined in the 
"config" file.

--
pc-linux% grep -i pid /usr/local/smokeping/etc/config
piddir  = /var/run/
--

So assuming you don't have any other instances of smokeping running, you 
should be able to start it fine. I guess to make sure you could always 
"killall -9 smokeping". Failing that, "find / -name smokeping.pid" may help.

Regards.
--

-- 
Brett Marler <brett at asroma.homeip.net>
WWW:	http://asroma.homeip.net/
Home: 	Melbourne, Australia

-- Binary/unsupported file stripped by Ecartis --
-- Err : No filename to use for decode, file stripped.
-- Type: application/pgp-signature

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

(Continue reading)

Steve Gaas | 3 Apr 19:13 2003

Install complete, Daemon Running, but I can't get graphs output

I don't know what to do..  I've been working on this all morning.  Any
help would be greatly appreciated!  I am running RedHat 8.0

What URL should one goto if the compilation and installation have gone
successfully to view data?

I'm trying Http://inetmon/ls/ (but no index.html was created for apache
to display)
I'm also trying http://inetmon/cgi-bin/smokeping.cgi but I receive the
following output from Apache:
Server error!
The server encountered an internal error and was unable to complete your
request. 
Error message: 
Premature end of script headers: smokeping.cgi 
If you think this is a server error, please contact the webmaster 
Error 500

Below is my smokemail.config file and my /bin/smokemail script.  

[root <at> netmon ls]# less /etc/smokeping.config 
# Note that all IP addresses in this file are false, to prevent some
# machine falling uder a deadly DOS storm because all users keep
# the same addresses in their config.

*** General ***

owner    = Steve Gaas
contact  = steve.gaas <at> vnetsource.com
mailhost = localhost
(Continue reading)

Steve Gaas | 3 Apr 22:49 2003

How to use echoping rather than ICMP


Hello! Can anyone help me with how to configure smokeping to use TCP
based echoping rather than ICMP echo's?

Thanks!

-steve

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Muhammad Talha | 4 Apr 00:02 2003
Picon

Re: How to use echoping rather than ICMP

hi

 can go to this link the procedure for setting upechoping
http://people.ee.ethz.ch/~oetiker/webtools/smokeping/probes/index.en.html

echoping should be installed first and changes required in config file

Regards

Talha

----- Original Message -----
From: "Steve Gaas" <steve.gaas <at> vnetsource.com>
To: <steve.gaas <at> vnetsource.com>; <smokeping-users <at> list.ee.ethz.ch>
Sent: Friday, April 04, 2003 1:49 AM
Subject: [smokeping-users] How to use echoping rather than ICMP

>
> Hello! Can anyone help me with how to configure smokeping to use TCP
> based echoping rather than ICMP echo's?
>
> Thanks!
>
> -steve
>
> --
> Unsubscribe
mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
> Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
> Archive     http://www.ee.ethz.ch/~slist/smokeping-users
(Continue reading)


Gmane