SmokePing (a network latency measurement tool) users list

Tobias Oetiker | 1 Mar 2002 07:47

Picon

Picon

announce smokeping 1.2


Folks,

I have released smokeping 1.2 ... there is no major change, just
some minor fixes to the probe loading and the FPing detection
more will come later ... I am looking at adding aliases and
probably some sort of alarm ... check the TODO file

cheers
tobi

--

-- 
 ______    __   _
/_  __/_  / /  (_) Oetiker, ETZ J97, ETH, 8092 Zurich, Switzerland
 / // _ \/ _ \/ / phoneto:+41(0)1-632-5286  faxto:+41(0)1-632-1517
/_/ \.__/_.__/_/ oetiker <at> ee.ethz.ch http://google.com/search?q=tobi

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Kerry Hu | 3 Mar 2002 07:55

Char set support


Hi,

I'd like to add some Chinese characters to the graph display. In config
file, I added "charset = gb2312" and some Chinese characters in title
section and it caused "Internal Server Error" when accessing the page.

What is the right way to do this?

Thanks for the help.

thanks,
-Kerry Hu

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Tobias Oetiker | 3 Mar 2002 10:05

Picon

Picon

Re: Char set support

Today Kerry Hu wrote:

>
> Hi,
>
> I'd like to add some Chinese characters to the graph display. In config
> file, I added "charset = gb2312" and some Chinese characters in title
> section and it caused "Internal Server Error" when accessing the page.
>
> What is the right way to do this?

Hi Kerry,

I have no experiance with the requirements of chinese web output
... so you have to help me here ... try running smokeping.cgi from
the command line and see what it has to say and if this is
consistant with the behaviour of a cgi working in chinese ...

cheers
tobi

> Thanks for the help.
>
> thanks,
> -Kerry Hu
>
>
>
>

(Continue reading)

Gulka, Kris | 5 Mar 2002 01:01

Grey bars

I just installed this tool - it is wonderful!!  I saw a question a while
back but never saw the answer - I have the same question:

what do the grey bars represent (above and below the median ping RTT)

Thanks in advance 

Kris Gulka
J.D. Edwards & Company

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Marc Powell | 5 Mar 2002 01:10

Re: Grey bars

They're a graphical representation of the return time of all the ping packets. The darker the grey, the more
packets returned at that time interval.

--
Marc Powell
Senior National Engineer
Education Networks of America
Sent from a very tiny keyboard on a very tiny wireless device. Please excuse the brevity and typos.
mpowell <at> ena.com

-----Original Message-----
From: Gulka, Kris <kris_gulka <at> jdedwards.com>
To: 'smokeping-users <at> list.ee.ethz.ch' <smokeping-users <at> list.ee.ethz.ch>
Sent: Mon Mar 04 18:01:11 2002
Subject: [smokeping-users] Grey bars

I just installed this tool - it is wonderful!!  I saw a question a while
back but never saw the answer - I have the same question:

what do the grey bars represent (above and below the median ping RTT)

Thanks in advance 

Kris Gulka
J.D. Edwards & Company

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users

(Continue reading)

Tobias Oetiker | 9 Mar 2002 16:59

Picon

Picon

Announce Smokeping 1.4


Folks,

I have released SmokePing 1.4

There are some minor bugfixes but THE BIG THING is a contributed
set of probes by Niko Tyni. He wrote a wrapper for the versatile
echoping program. Three cheers to Finnland.

The documentation is on the website

http://people.ee.ethz.ch/~oetiker/webtools/smokeping/probes

Also note, that 1.4 adds a new mandatory config variable called
piddir where you can define the location of the pid file.

When upgrading smokeping, make sure to 'touch' any cgi script
running via speedy or you might be testing the old thing.

take care
tobi

--

-- 
 ______    __   _
/_  __/_  / /  (_) Oetiker, ETZ J97, ETH, 8092 Zurich, Switzerland
 / // _ \/ _ \/ / phoneto:+41(0)1-632-5286  faxto:+41(0)1-632-1517
/_/ \.__/_.__/_/ oetiker <at> ee.ethz.ch http://google.com/search?q=tobi

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe

(Continue reading)

Jeff Cotterman | 12 Mar 2002 19:09

Picon

Problems with EchoPing Probe


Does anyone have a working config that uses EchoPing?  I need to use it,
as I need to check the latency on a couple mail servers that do not
respond to ping, however when I add it my config and restart, I get the
following error:

Restarting smokeping: ### fping seems to report in 1 miliseconds
Base class package "probes::basevars" is empty.
 (Perhaps you need to 'use' the module which defines that package
first.) at
/usr/lib/perl5/smokeping//probes/basefork.pm line 64
BEGIN failed--compilation aborted at
/usr/lib/perl5/smokeping//probes/basefork.pm
line 64.
Compilation failed in require at (eval 10) line 3.
 ...propagated at /usr/share/perl/5.6.1/base.pm line 18.
BEGIN failed--compilation aborted at
/usr/lib/perl5/smokeping//probes/EchoPing.pm
line 121.
Compilation failed in require at (eval 9) line 3.

Cheers,

Jeff

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

(Continue reading)

deepblue | 12 Mar 2002 20:22

Picon

Downtime and average response extraction


Hello all		
	Does anyone know an easy way ( I mean without dumping and
parsing all the time the rrd files) to get smokeping to write a log when
a host is unreachable. Also I would be very pleased if I could find a
way to get automaticaly the average response time (the value that is
shown in the graphs). Any ideas on these?
Thnx in advance

Michael 

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Niko Tyni | 14 Mar 2002 15:12

Picon

Picon

Re: Problems with EchoPing Probe


On Tue, Mar 12, 2002 at 09:09:04AM -0900, Jeff Cotterman wrote:
> 
> Does anyone have a working config that uses EchoPing?  I need to use it,
> as I need to check the latency on a couple mail servers that do not
> respond to ping, however when I add it my config and restart, I get the
> following error:
> 
> Restarting smokeping: ### fping seems to report in 1 miliseconds
> Base class package "probes::basevars" is empty.

This is because one perl module was missing from SmokePing 1.4. 
Get 1.5 and try again.
--

-- 
niko

--
Unsubscribe mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request <at> list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Stefan.Wiederoder | 19 Mar 2002 08:33

Picon

smokeping and speedycgi


Hello smokeping-users,

I´m trying to setup smokeping 1.5 on a Solaris 8 machine, Apache 1.3.22,
perl 5.6.1 - but I´m
stuck with SpeedyCGI 2.11 

Running make ends up with this:

gcc -DSOLARIS2=280 -DUSE_EXPAT -I../lib/expat-lite -DNO_DL_NEEDED
-I/opt/apache_1.3.22a/include -I../src -I. -DSPEEDY_PROGNAME=\"m
od_speedycgi\" -DSPEEDY_VERSION=\"2.11\" -DSPEEDY_FRONTEND  -c
speedy_optdefs.c
  -o mod_speedycgi.so speedy_optdefs.o speedy_opt.o speedy_script.o
speedy_group.o speedy_ipc.o speedy_poll.o speedy_slot.o speedy_
file.o speedy_backend.o speedy_frontend.o speedy_util.o mod_speedycgi.o
apxs:Break: Command failed with rc=16777215
*** Error code 1
make: Fatal error: Command failed for target `mod_speedycgi.so'
Current working directory /root/CGI-SpeedyCGI-2.11/mod_speedycgi
*** Error code 1
make: Fatal error: Command failed for target `subdirs'

Sam Horrocks says it sounds like an API change of apache which he´ll figure
out - he recommends
to use an older version of Apache.

hnsunnms01:~/CGI-SpeedyCGI-2.11/mod_speedycgi#/opt/apache/bin/apachectl
 > start
 > Syntax error on line 205 of /opt/apache_1.3.22a/conf/httpd.conf:

(Continue reading)

Group

gmane.network.smokeping.user.

Advertisement

Project Web Page

SmokePing (a network latency measurement tool) users list

Search Archive

Page

1 | 2 | 3 | 4

Articles in period: 30

March 2002

Language

Change language

Options

Current view: Threads only / Showing only 20 lines / Not hiding cited text.
Change to All messages, whole messages, or hide cited text.

Post a message
NNTP Newsgroup
Classic Gmane web interface
XML

XML

RSS Feed
List Information

About Gmane

Recent entries

Changing pings count (13 Jun 2013)
NTP probe (12 Jun 2013)
Smoke Ping Stops Working (7 Jun 2013)
Smoke Ping Stops Working (7 Jun 2013)
smokeping startup script installation + remocular question (7 Jun 2013)
Sporadic crashes on reload in Smokeping.pm (5 Jun 2013)
Sporadic crashes on reload in Smokeping.pm (4 Jun 2013)
units for rtt_max (4 Jun 2013)
partially solved problem with tcpping probe on centos6 (3 Jun 2013)
ANNOUNCE: fping 3.5 (22 May 2013)
error (15 May 2013)
error (13 May 2013)
smokeping for ubuntu (11 May 2013)
not able to add other probes than fping (9 May 2013)
Master/Slave configuration (7 May 2013)
Fwd: Dynamic addition and removal of hosts (7 May 2013)
Fwd: Dynamic addition and removal of hosts (7 May 2013)
remote fping, again (1 May 2013)
[ANNOUNCE] Admin web-interface and API for Smokeping (29 Apr 2013)
gid problems (23 Apr 2013)
gid problems (23 Apr 2013)

Archives

20	June 2013
22	May 2013
54	April 2013
10	March 2013
18	February 2013
27	January 2013
38	December 2012
24	November 2012
24	October 2012
42	September 2012
32	August 2012
121	July 2012
30	June 2012
33	May 2012
25	April 2012
28	March 2012
39	February 2012
28	January 2012
42	December 2011
42	November 2011
62	October 2011
29	September 2011
14	August 2011
39	July 2011
14	June 2011
21	May 2011
15	April 2011
16	March 2011
6	February 2011
21	January 2011
14	December 2010
29	November 2010
35	October 2010
26	September 2010
16	August 2010
16	July 2010
15	June 2010
27	May 2010
12	April 2010
52	March 2010
27	February 2010
59	January 2010
26	December 2009
55	November 2009
3	October 2009
21	September 2009
20	August 2009
20	July 2009
43	June 2009
32	May 2009
46	April 2009
55	March 2009
47	February 2009
54	January 2009
30	December 2008
38	November 2008
20	October 2008
42	September 2008
64	August 2008
79	July 2008
159	June 2008
62	May 2008
106	April 2008
104	March 2008
64	February 2008
44	January 2008
47	December 2007
52	November 2007
84	October 2007
78	September 2007
30	August 2007
12	July 2007
26	June 2007
16	May 2007
34	April 2007
26	March 2007
21	February 2007
46	January 2007
53	December 2006
23	November 2006
40	October 2006
30	September 2006
65	August 2006
61	July 2006
26	June 2006
30	May 2006
21	April 2006
36	March 2006
22	February 2006
22	January 2006
48	December 2005
19	November 2005
31	October 2005
34	September 2005
61	August 2005
60	July 2005
44	June 2005
57	May 2005
29	April 2005
32	March 2005
33	February 2005
40	January 2005
27	December 2004
36	November 2004
32	October 2004
32	September 2004
27	August 2004
34	July 2004
59	June 2004
48	May 2004
23	April 2004
23	March 2004
56	February 2004
49	January 2004
47	December 2003
32	November 2003
33	October 2003
43	September 2003
56	August 2003
24	July 2003
28	June 2003
39	May 2003
42	April 2003
36	March 2003
45	February 2003
14	January 2003
30	December 2002
13	November 2002
34	October 2002
51	September 2002
14	August 2002
30	July 2002
24	June 2002
23	May 2002
31	April 2002
30	March 2002
41	February 2002
72	January 2002
15	December 2001
3	November 2001
1	December 1989

Design

Zawodny | Right Menu | Left Menu

Your Own Design

Paste the URL of your CSS below. Download CSS template