Luo Xueyuan | 1 Nov 14:40 2009
Picon

Samba access unstable

Hi, all
I have tried to install samba(|3.0.28a|) in Ubuntu 8.04 in apt-get way.
When I used a Windows client to browse the share folder, I found
sometime it popups a note tell me this folder is not accessable,
sometime I can get in and modified the files.

Could someone help me check if the problem comes from my smb.conf?

Thank you very much.
BR,
Milo

Info of smb.conf :

>     [global]
>     server string = %h server (Samba, Ubuntu)
>     map to guest = Bad User
>     obey pam restrictions = Yes
>     passdb backend = tdbsam
>     pam password change = Yes
>     passwd program = /usr/bin/passwd %u
>     passwd chat = *Enter\snew\s*\spassword:* %n\n
>     *Retype\snew\s*\spassword:* %n\n *password\s updated\ssuccessfully* .
>     unix password sync = Yes
>     syslog = 0
>     log file = /var/log/samba/log.%m
>     max log size = 1000
>     dns proxy = No
>     panic action = /usr/share/samba/panic-action %d
>     invalid users = root
(Continue reading)

vishesh kumar | 1 Nov 15:33 2009
Picon

Idmap purpose

Dear all
I m using samba+master ldap server as pdc and samba +slave ldap server as bdc.
I want to know is there any need to use idmap in this configuration
Thanks

-- 
Sent from my mobile device

http://linuxinterviews.blogspot.com
--

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Robert LeBlanc | 1 Nov 16:10 2009
Picon

Re: idmapping changes from 3.0.10 to 3.4.2.

You seem to be missing an idmap backend entry. If you are going to 3.4, you
may want to look at hash, there is also RID. If you already have an extended
schema, you may want to look at ads.

Robert LeBlanc
Life Sciences & Undergraduate Education Computer Support
Brigham Young University

On Fri, Oct 30, 2009 at 4:37 PM, Wayne Rasmussen <waynemonarch <at> gmail.com>wrote:

> idmapping changes from  3.0.10 to 3.4.2.
>
> Trying to transition from 3.0.10 to 3.4.2 with a minimal change to the
> system
> meaning it would be nice to only change the smb.conf file if possible.
>
> The new version doesn't seem to properly work.  getent passwd only produces
> entries from /etc/passwd.  Sometimes, getent passwd user will get results
> but usually they don't.
>
> Also, when winbindd (ves 3.0.10) started it would have a heavy load for
> about
> 15 minutes while it loaded information.  This version (3.4.2) seems to have
> very little load so it seems to act differently or it is having a problem.
>
> Any suggestions on how to change the global section below quickly and
> easily
> to make this a transparent tranision?
>
> Below is the global section of our smb.conf for 3.0.10.
(Continue reading)

Ulrik Darnetz | 1 Nov 20:04 2009

AUTO : Ulrik Darnetz est en vacances (renvoi de Jeu 11/05/2009)


Je suis absent entre Sam 10/31/2009 et Jeu 11/05/2009.

Remarque : ceci est une réponse automatique à votre message  "samba Digest,
Vol 83, Issue 1" envoyé le 01/11/2009 20:00:02.

C'est la seule notification que vous recevrez pendant l'absence de cette
personne.

--

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Timothy Murphy | 2 Nov 04:11 2009
Picon

Accessing Windows file-system from Linux samba server

I don't understand Windows permissions under Samba.
I am running an smb server under CentOS-5.4,
and have a Windows XP Pro machine ("harriet") as a client.

I have set up shares C and D on harriet
corresponding to the 2 drives C: and D: on the machine,
and I have asked that files should be shared.

Now when I mount harriet:C I can see
the top level folders,
but cannot see Documents and Settings\tim
although I can enter the All Users and Default User folders:
----------------------------------------
[tim <at> helen samba]$ sudo mount -t cifs harriet:C /mnt/win
Password:
[tim <at> helen samba]$ cd /mnt/win
[tim <at> helen win]$ cd Documents\ and\ Settings/
[tim <at> helen Documents and Settings]$ ls
All Users  Default User  deirdre  LocalService  NetworkService  roisin  tim
[tim <at> helen Documents and Settings]$ ls tim
ls: reading directory tim: Permission denied
[tim <at> helen Documents and Settings]$ ls Default\ User/
Application Data  Desktop    Local Settings  NetHood     NTUSER.DAT.LOG  
Recent  Start Menu
Cookies           Favorites  My Documents    NTUSER.DAT  PrintHood       
SendTo  Templates
[tim <at> helen Documents and Settings]$ ls All\ Users/
Application Data  Desktop  Documents  DRM  Favorites  Lx_cats  Start Menu  
Templates
----------------------------------------
(Continue reading)

Alex Samad | 2 Nov 04:01 2009
Picon

Problem with pam_winbind

Hi

my setup debian amd64 with 
ii  samba                                       2:3.4.2-1
SMB/CIFS file, print, and login server for Unix
ii  samba-common                                2:3.4.2-1
common files used by both the Samba server and 
ii  samba-common-bin                            2:3.4.2-1
common files used by both the Samba server and 
ii  samba-doc                                   2:3.2.5-4lenny7
Samba documentation
ii  samba-tools                                 2:3.4.2-1
Samba testing utilities

installed.

I have a working connection config, I can

net ads testjoin - result okay
and wbinfo -u i& wbinfo -g work

wbinfo -a test%password
wbinfo -K test%password

work.

I have /etc/pam.d/imap-test setup to loo like
auth    required  pam_winbind.so
auth    required  pam_deny.so
account    required pam_winbind.so
(Continue reading)

Patrick Rynhart | 2 Nov 04:39 2009
Picon

Samba 3.4.2 Trusted Domain Logon gives: "Conflicting domain portions are not supported for NETLOGON calls"

Hi,

I'm specifically have a problem with idmap entries not being created in
my LDAP backend for trusted domain logons - Local accounts appear to be
fine.

I have installed the Sernet enterprise packages from:

http://ftp.sernet.de/pub/samba/experimental/rhel/5/i386/

I'm preparing the server as follows:

1. smbpasswd -w '<password>'
2. net rpc trustdom establish SANDBOX  (where SANDBOX is my trusted domain)
3. net idmap secret SANDBOX '...'
4. net idmap secret alloc '...'
5. Start winbind only (winbindd -D)
6. net sam provision
7. Start nmbd and smbd as daemons

Local accounts are fine and the trust appears healthy too:

# wbinfo -t
checking the trust secret via RPC calls succeeded

My smb.conf file is as follows:

[global]
workgroup = SEAT
server string = %h server (Samba %v)
(Continue reading)

Patrick Rynhart | 2 Nov 05:13 2009
Picon

Re: Samba 3.4.2 Trusted Domain Logon gives: "Conflicting domain portions are not supported for NETLOGON calls"

I was thinking that I could be missing some key libraries, perhaps I
still am ?  I have tried the following:

install -m 0644 /root/samba-3.4.2/source3/bin/libtalloc.so.1 /lib
install -m 0644 /root/samba-3.4.2/source3/bin/libtdb.so.1 /lib
install -m 0644 /root/samba-3.4.2/source3/bin/libwbclient.so.0 /lib
install -m 0644 /root/samba-3.4.2/nsswitch/libnss_winbind.so /lib
install -m 0644 /root/samba-3.4.2/nsswitch/libnss_wins.so /lib
install -m 0644 /root/samba-3.4.2/nsswitch/libnss_wins.so
/lib/libnss_winbind.so.2
install -m 0644 /root/samba-3.4.2/nsswitch/libnss_wins.so
/lib/libnss_wins.so.2

Thanks!

Patrick

Patrick Rynhart wrote:
> Hi,
> 
> I'm specifically have a problem with idmap entries not being created in
> my LDAP backend for trusted domain logons - Local accounts appear to be
> fine.
> 
> I have installed the Sernet enterprise packages from:
> 
> http://ftp.sernet.de/pub/samba/experimental/rhel/5/i386/
> 
> I'm preparing the server as follows:
> 
(Continue reading)

Robert LeBlanc | 2 Nov 06:02 2009
Picon

Re: Problem with pam_winbind

Does this bug describe what you are seeing?
https://bugzilla.samba.org/show_bug.cgi?id=6833

Robert LeBlanc
Life Sciences & Undergraduate Education Computer Support
Brigham Young University

On Sun, Nov 1, 2009 at 9:01 PM, Alex Samad <alex <at> samad.com.au> wrote:

> Hi
>
> my setup debian amd64 with
> ii  samba                                       2:3.4.2-1
> SMB/CIFS file, print, and login server for Unix
> ii  samba-common                                2:3.4.2-1
> common files used by both the Samba server and
> ii  samba-common-bin                            2:3.4.2-1
> common files used by both the Samba server and
> ii  samba-doc                                   2:3.2.5-4lenny7
> Samba documentation
> ii  samba-tools                                 2:3.4.2-1
> Samba testing utilities
>
> installed.
>
> I have a working connection config, I can
>
> net ads testjoin - result okay
> and wbinfo -u i& wbinfo -g work
>
(Continue reading)

Alex Samad | 2 Nov 07:47 2009
Picon

Re: Problem with pam_winbind

On Sun, Nov 01, 2009 at 11:02:07PM -0600, Robert LeBlanc wrote:
> Does this bug describe what you are seeing?
> https://bugzilla.samba.org/show_bug.cgi?id=6833

no, I am not using "kerberos method"

> 
> Robert LeBlanc
> Life Sciences & Undergraduate Education Computer Support
> Brigham Young University
> 
> 
> On Sun, Nov 1, 2009 at 9:01 PM, Alex Samad <alex <at> samad.com.au> wrote:
> 
> > Hi
> >
> > my setup debian amd64 with
> > ii  samba                                       2:3.4.2-1
> > SMB/CIFS file, print, and login server for Unix
> > ii  samba-common                                2:3.4.2-1
> > common files used by both the Samba server and
> > ii  samba-common-bin                            2:3.4.2-1
> > common files used by both the Samba server and
> > ii  samba-doc                                   2:3.2.5-4lenny7
> > Samba documentation
> > ii  samba-tools                                 2:3.4.2-1
> > Samba testing utilities
> >
> > installed.
> >
(Continue reading)


Gmane