headers
Andrew Bartlett | 1 Jan 2006 05:36
Picon
Favicon

Re: 3.0.21a make fails on Mac OS X 10.4.3

On Sat, 2005-12-31 at 10:25 -0800, Jeremy Allison wrote:
> On Sat, Dec 31, 2005 at 07:33:11AM -0800, Bruce Hobbs wrote:
> > Currently running 3.0.10 that comes standard with Mac OS X 10.4 (Tiger).
> > Attempted to install 3.0.21a last night and make failed like this:
> > 
> > Compiling libsmb/clikrb5.c
> > libsmb/clikrb5.c: In function 'krb5_locate_kdc':
> > libsmb/clikrb5.c:306: error: 'krb5_krbhst_handle' undeclared (first use in
> > this function)
> > libsmb/clikrb5.c:306: error: (Each undeclared identifier is reported only once
> > libsmb/clikrb5.c:306: error: for each function it appears in.)
> > libsmb/clikrb5.c:306: error: parse error before 'hnd'
> > libsmb/clikrb5.c:307: error: 'krb5_krbhst_info' undeclared (first use in
> > this function)
> > libsmb/clikrb5.c:307: error: 'hinfo' undeclared (first use in this function)
> > libsmb/clikrb5.c:316: error: 'KRB5_KRBHST_KDC' undeclared (first use in
> > this function)
> > libsmb/clikrb5.c:316: error: 'hnd' undeclared (first use in this function)
> > libsmb/clikrb5.c:837:2: error: #error UNKNOWN_KRB5_AP_REQ_FREE_FUNCTION
> > libsmb/clikrb5.c:879:2: error: #error UNKOWN_KRB5_AP_REQ_DECODING_FUNCTION
> > make: *** [libsmb/clikrb5.o] Error 1
> > 
> > Latest update to my system was installation of gpg. Thoughts?
> 
> Sorry, Apple don't provide any MacOS/X hardware or software to the Team
> so it's hard to make sure that the code works without easy access to
> vendor hardware.
> 
> Someone is in the process of remedying that (one of Apples own customers,
> who need Samba to work on MacOS/X - if that doesn't embarrass Apple then
(Continue reading)

Permalink | Reply | 0 comments |
headers
Tim E. | 1 Jan 2006 05:48
Picon
Favicon

Repeating ".." directory listing on NT4 client from Fedora FC4 samba stock install

Upgraded with a fresh install from FC2 to Fedora FC4 from cdroms. The samba is samba-3.0.14a. The
/home/public samba share under FC2 worked fine. The FC4 /home/public directory will repeatedly list
".." in the directory listing for NT4 clients. This does not happen on W2K or XP. The directory looks like this
 ..
 testfile.txt
 DIR1\
         \..
         \testfile2.txt
         \testfile3.txt
         \DIR2\
                 \..
                 (if selected repeats whole root shared directory down)

The ".." repeats. If it is selected it repeats the whole root directory down.
I have changed various hide Yes/No and even tried veto /../ but can not remove this behavior. I know FC2
(samba 3.0.5) did not have this problem. Is there a setting I can change that disables this. I have searched
and could not come up with a decent description of the problem. In the mean time I have loaded another FC4 and
upgraded samba to 3.0.21a and this problem does not appear on the upgraded samba. Any suggestions would be helpful.

Tim

		
---------------------------------
Yahoo! Shopping
 Find Great Deals on Holiday Gifts at Yahoo! Shopping 
--

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba
(Continue reading)

Permalink | Reply | 2 comments |
headers
Hal Vaughan | 1 Jan 2006 06:39

Access Denied Error On Windows XP --> Linux Printer

I'm running Samba Version 3.0.14a on Debian Linux.  My sm.conf is listed at 
the end of this message.  I have two printers on server.thresh.lan, a Brother 
HL-1440 laser printer and an HP-5510 Office Jet 
(printer/scanner/fax/copier/gopher and dishwasher).  The Brother is named 
"laser" and the HP is named "multiuse".  I have a multi-boot system on the 
LAN that can boot Windows 98, Windows 2000, and Windows XP.  Right now I'm 
working with Windows XP.  I had no problem installing the Brother printer on 
Windows XP.  There was no problem with the printer being a network printer.

I have tried to install the HP printer.  I couldn't find the original driver 
disk, so I downloaded the drivers from HP.  Part way through the install, the 
HP program tells me to connect the USB cable to the computer.  Of course I 
can't do that, since the printer is connected to my server.  I tried 
installing from the "Add Printers" program in the "Printers" window, and 
searched to see if there were a .inf file in the unpacked files from the HP 
install, but could not find one that "described my printer" (as Windows puts 
it).  I finally installed it with the HP Office Jet driver listed by Windows 
as one of the pre-installed drivers.

It installed, but there is no apparent connection.  When I right click on the 
icon for this printer and select "Open", I get the printer queue listing 
window with the message "Access denied, unable to connect" in the titlebar.  
There are no error messages or any corresponding messages in my Samba logs.

After searching, I found one thing I tried.  I opened the command prompt and 
typed in "echo Hello >//server/multiuse" and it printed on the HP printer.  
This leads me to believe the problem is in the Windows drivers, since it is 
clear the systems connect and another shared printer is accessible.  It's 
also clear Samba is listening and receiving messages sent to this printer.
(Continue reading)

Permalink | Reply | 0 comments |
headers
Robert Krauss | 1 Jan 2006 17:37
Picon

negative len requested??

Hi all,

happy ney year!

I have a lot of these messages with different filenames and dirs in my smbd.log:

[2006/01/01 17:23:49, 0] smbd/vfs.c:vfs_allocate_file_space(375)
  vfs_allocate_file_space: dir1/dir2/file.zip negative len requested.

when I ls -la in this dir I get:
-rwxrw----    1 ab       everyone 22931487 Sep 10  2003 file.zip

What does it mean and do I have a problem here?

Regards
Robert
--

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba
Permalink | Reply | 2 comments |
headers
Gerard Seibert | 1 Jan 2006 18:27

Connection with WinXP Error

I have Samba 3 (latest version) installed on a FreeBSD 5.4 system.

I seem to be getting error messages in my log file, etc. that I am unable 
to decypher.

I tried running this command:

 	smbclient -U% -L localhost

and this was the output:

Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.20b]
tree connect failed: NT_STATUS_LOGON_FAILURE

This is the log file output:

log.127.0.0.1
[2006/01/01 12:09:36, 0] smbd/service.c:make_connection_snum(575)
   Can't become connected user!

The following is the [Global] section of my smb.conf file:

# Samba config file created using SWAT
# from 216.45.217.148 (216.45.217.148)
# Date: 2005/08/21 11:05:15

# Global parameters
[global]
lanman auth = no
log file = /var/log/samba/log.%m
(Continue reading)

Permalink | Reply | 0 comments |
headers
Lars Müller | 2 Jan 2006 00:24
Picon

Samba RPM packages for all SuSE Linux products (was: Samba 3.0.21a Available for Download)

Hello,

On Thu, Dec 29, 2005 at 09:44:42PM -0600, Gerald Carter wrote:
[snip]
> Binary packages are available at
> 
> 	http://download.samba.org/samba/ftp/Binary_Packages/

RPM packages of Samba 3.0.21a for all SuSE Linux products are available
at ftp://ftp.SuSE.com/pub/projects/samba/3.0/ or
http://ftp.SuSE.com/pub/projects/samba/3.0/

Currently there are packages for SuSE Linux (ppc, x86, and x86_64) 9.0,
9.1, 9.2, 9.3, 10.0, UnitedLinux 1/ SuSE Linux Enterprise Server (SLES)
8, and SLES 9.

Packages for ppc are only available for 10.0, SLES 8 and 9 as there are
no other SuSE Linux product of this architecture.

If requested by our users we'll provide packages for the s390 and ia64
architectures too.

The same packages are also available at
http://download.Samba.org/samba/ftp/Binary_Packages/SuSE/3.0/

Please use a mirror close to your site.  A list of Samba.org mirrors is
available at http://Samba.org/  There choose a mirror at the right top
of the page.

There are also a bunch of SuSE mirrors.  A list of international mirrors
(Continue reading)

Permalink | Reply | 2 comments |
headers
Jeremy Allison | 2 Jan 2006 01:55
Picon
Favicon

Re: negative len requested??

On Sun, Jan 01, 2006 at 05:37:29PM +0100, Robert Krauss wrote:
> Hi all,
> 
> happy ney year!
> 
> I have a lot of these messages with different filenames and dirs in my smbd.log:
> 
> [2006/01/01 17:23:49, 0] smbd/vfs.c:vfs_allocate_file_space(375)
>   vfs_allocate_file_space: dir1/dir2/file.zip negative len requested.
> 
> when I ls -la in this dir I get:
> -rwxrw----    1 ab       everyone 22931487 Sep 10  2003 file.zip
> 
> What does it mean and do I have a problem here?

Can you send in a debug level 10 log once you've worked out what
application causes this problem please ? That would be very
helpful. What version of Samba is this ?

Thanks,

	Jeremy.
--

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba
Permalink | Reply | 1 comment |
headers
Ralf Gross | 2 Jan 2006 10:44
Picon

Re: Samba 3.0.21 + PANIC: internal error + lib/fault.c

Jeremy Allison schrieb:
> On Thu, Dec 22, 2005 at 09:00:28PM +0100, Ralf Gross wrote:
> > Jeremy Allison schrieb:
> > > On Thu, Dec 22, 2005 at 05:05:47PM +0100, Ralf Gross wrote:
> > > >
> > > > [PANIC]
> > > Try adding -g and do a full recompile - this will ensure the smbd binary
> > > has symbols embedded in it. Then add the line :
> > > 
> > > panic action = /bin/sleep 999999
> > > 
> > > to the [global] section of your smb.conf and restart smbd. When 
> > > the panic occurs you will have a frozen smbd process as the parent
> > > as a sleep process. Start gdb :
> > > 
> > > gdb /usr/local/samba/sbin/smbd
> > > 
> > > and then attach to the frozen smbd process via :
> > > 
> > > attach <pid>
> > > 
> > > Then type "bt" to get the backtrace that will show us where the problem
> > > lies.
> > 
> > Thanks for your quick reply. I'll do this in January when I'm back in
> > the office. Should I open a bug then?
> 
> Yes please - attach these messages and the backtrace.

I compiled 3.0.21a today and couldn't reproduce the problem.
(Continue reading)

Permalink | Reply | 0 comments |
headers
Robert Schetterer | 2 Jan 2006 11:36

Re: Samba RPM packages for all SuSE Linux products

Hello Lars,
thx for your hard work , and a happy new Year
Regards

Lars Müller schrieb:
> Hello,
> 
> On Thu, Dec 29, 2005 at 09:44:42PM -0600, Gerald Carter wrote:
> [snip]
>> Binary packages are available at
>>
>> 	http://download.samba.org/samba/ftp/Binary_Packages/
> 
> RPM packages of Samba 3.0.21a for all SuSE Linux products are available
> at ftp://ftp.SuSE.com/pub/projects/samba/3.0/ or
> http://ftp.SuSE.com/pub/projects/samba/3.0/
> 
> Currently there are packages for SuSE Linux (ppc, x86, and x86_64) 9.0,
> 9.1, 9.2, 9.3, 10.0, UnitedLinux 1/ SuSE Linux Enterprise Server (SLES)
> 8, and SLES 9.
> 
> Packages for ppc are only available for 10.0, SLES 8 and 9 as there are
> no other SuSE Linux product of this architecture.
> 
> If requested by our users we'll provide packages for the s390 and ia64
> architectures too.
> 
> The same packages are also available at
> http://download.Samba.org/samba/ftp/Binary_Packages/SuSE/3.0/
>
(Continue reading)

Permalink | Reply | 0 comments |

Gmane