headers
Andrew Bartlett | 7 Nov 2012 10:56
Picon
Favicon

Re: libkdc-policy.so: cannot open shared object file: No such file or directory?

On Mon, 2012-11-05 at 13:53 -0800, samba.to.anomalyst <at> xoxy.net wrote:
> The following NEW packages will be installed:
>   libbsd-dev libpopt-dev
> 
> git pull, make, make install

Have you re-run configure?

If that doesn't fix it, then it might be a good time to just wipe your whole tree.  This command will
remove *EVERYTHING* that isn't committed to git, which of course
includes all our build artefacts.

git clean -x -f -d

Andrew Bartlett
-- 
Andrew Bartlett                                http://samba.org/~abartlet/
Authentication Developer, Samba Team           http://samba.org

--

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba
Permalink | Reply | 0 comments |
headers
samba user | 7 Nov 2012 13:00
Picon

CreatePrinterIC failure from Windows8 client

Hi,

While testing Window8 print functionality I notice that the point and print
installation of the SAMBA shared printer fails.

The symptom is that the driver files gets copied on to the client but
towards the end while finishing the printer addition Windows8 throws an
error "Cannot connect to Printer: Operation failed with error 0x000006d1".
Please note the PnP installation for the same printer works fine from a
Windows7 client.

The printer server I'm using is Debian etch with SAMBA-3.5.15 installed on
it and the client is a Windows8-Pro running on a laptop.

I captured the packet trace from which it appears like this is an RPC error
from SAMBA side. Below is the snippet of failed communication:

SPOOLSS              CreatePrinterIC request

DCERPC                Fault: call_id: 19 Fragment: Single ctx_id: 0 status:
nca_op_rng_error

By looking at the source code (source3/rpc_server/srv_spoolss_nt.c, line
#9711 - 9716) it looks like SAMBA does not support this RPC call.

WERROR _spoolss_CreatePrinterIC(pipes_struct *p,

                                struct spoolss_CreatePrinterIC *r)

{
(Continue reading)

Permalink | Reply | 0 comments |
headers
Innocent Yevide | 7 Nov 2012 14:57
Picon
Favicon

Samba4-rc4 Internal DNS && ACL sync problem

Hello,

I am trying to connect to samba4 internal DNS server from Win7 using DNS manager. but I cannot connect to it;
however I am able to connect to the same on windows server.

the samba4 dns is however working fine. I can resolve hosts properly.

do I need may be to configure anything, or set server role parameter to something?

My second issue is:

I am trying to synchronize a folder (including acl) from windows server to samba4 share but during
synchronization I get this:

smbd[23810]: [2012/11/07 17:42:26.786486,  0] ../source3/modules/vfs_posixacl.c:351(smb_acl_to_posix)
smbd[23810]:   smb_acl_to_posix: ACL group:3000014:rwx
smbd[23810]:   user:root:rwx
smbd[23810]:   group::rwx
smbd[23810]:   group:3000014:rwx
smbd[23810]:   other::rwx
smbd[23810]:   group:wheel:rwx
smbd[23810]:   user::rwx
smbd[23810]:   group:3000000:r-x
smbd[23810]:   mask::rwx
smbd[23810]:    is invalid for set (No such file or directory)
smbd[23810]: [2012/11/07 17:42:26.925905,  0] ../source3/modules/vfs_posixacl.c:351(smb_acl_to_posix)
[---------------------------------  rest is omitted ----------------------------------------]

is this error known to anyone?
(Continue reading)

Permalink | Reply | 4 comments |
headers
Jordi Casas | 7 Nov 2012 21:37
Picon

Samba4 Kerberos & Oracle

Hello!

I are running samba4 (from git) on a debian wheezy machine and are
experimenting with Oracle XE (in Windows XP).

If I try with Windows Active Directory I can connect to Oracle, but when I
try with samba4 I see following errors in samba log:

[2012/11/07 21:18:55,  3]
../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
  Kerberos: TGS-REQ Administrator <at> DOM.TEST.COM from ipv4:172.17.123.244:1192for
JORDITESTA <at> DOM.TEST.COM [renewable, forwardable]
[2012/11/07 21:18:55,  3]
../source4/kdc/db-glue.c:1389(samba_kdc_lookup_server)
  Failed to find an entry for JORDITESTA
[2012/11/07 21:18:55,  3]
../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
  Kerberos: Server not found in database: JORDITESTA <at> DOM.TEST.COM: no such
entry found in hdb
[2012/11/07 21:18:55,  3]
../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
  Kerberos: Failed building TGS-REP to ipv4:172.17.123.244:1192

samba-tool spn list JORDITESTA$
jorditesta$
User CN=JORDITESTA,CN=Computers,DC=dom,DC=test,DC=com has the following
servicePrincipalName:
     HOST/jorditesta.dom.test.com
     HOST/JORDITESTA
(Continue reading)

Permalink | Reply | 0 comments |
headers
Brian Haupt | 7 Nov 2012 21:38
Favicon

Samba4 DNS error

We have setup separate 2 Samba4 Domains in test environments and are having some errors in DNS. The errors
are the same on both domains and they are as follows.

Domain 1:
Ubuntu 12.04
Samba 4.1.0pre1-GIT-92e17d5
This domain was a clean provision as a new domain.

Domain 2:
Debian 6.0.6
Samba 4.1.0pre1-GIT-92e17d5
Classic upgrade from Samba3

When trying to add a Forwarder to DNS using the DNS Remote Administration tool on Windows 7 we receive
"The server forwarders cannot be upgraded.
This function is not supported on this system."

On both systems we are using Samba4's internal DNS.

Thank you,
Brian
--

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba
Permalink | Reply | 1 comment |
headers
felix | 7 Nov 2012 23:48
Picon

Re: Samba4 DNS error

> We have setup separate 2 Samba4 Domains in test environments and are
> having some errors in DNS. The errors are the same on both domains and
> they are as follows.
>
> Domain 1:
> Ubuntu 12.04
> Samba 4.1.0pre1-GIT-92e17d5
> This domain was a clean provision as a new domain.
>
> Domain 2:
> Debian 6.0.6
> Samba 4.1.0pre1-GIT-92e17d5
> Classic upgrade from Samba3
>
> When trying to add a Forwarder to DNS using the DNS Remote Administration
> tool on Windows 7 we receive
> "The server forwarders cannot be upgraded.
> This function is not supported on this system."
>
> On both systems we are using Samba4's internal DNS.
>

Internal dns server supports only one forwarder and it must be declared in
smb.conf as follows:

dns forwarder = <ip addr of external dns server>

See https://wiki.samba.org/index.php/DNS for more info.

Felix.
(Continue reading)

Permalink | Reply | 0 comments |
headers
Paras pradhan | 7 Nov 2012 22:49
Picon

network name issue

Hi,

My samba got connected to ADS successfully. However when I try to Map
network drive. I get " The specified network name is no longer
availalble" message.

Using smbclient I get this

root <at> comp2:~# smbclient \\\\comp2.domain.com\\ppradhan --user ppradhan
WARNING: The "idmap uid" option is deprecated
WARNING: The "idmap gid" option is deprecated
Enter ppradhan's password:
dos charset 'CP850' unavailable - using ASCII
Domain=[ACL] OS=[Unix] Server=[Samba 3.6.6]
tree connect failed: NT_STATUS_CONNECTION_INVALID

This is Solaris 11 OS and samba is 3.6.6 from solaris.

Need help.

Thanks!
Paras.
--

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba
Permalink | Reply | 0 comments |

Gmane