headers
Austin Tuan | 10 Apr 2009 05:53
Picon

Stupid me: Forgot to uncomment include-range in configuration file discovery-configuration.xml

    This is a stupid story of mine, hope that you folks won't bump
into the same situation......

    Just did a clean install on Fedora 10, according to the installation guide:
http://www.opennms.org/documentation/installguide.html

    At the end I just modified the ip range in discovery-configuration.xml.

    I can log on to http://localhost:8980/opennms/

    BUT everything there is ZERO, and nothing had been discovered.

    I quickly dug through $OPENNMS_HOME/logs/ , and noticed the below
errors and warnings:

dhcpd.log:
ERROR [OpenNMS.Dhcpd] Dhcpd: I/O exception occured processing incomming request

rtc.log:
WARN  [RTC Updater Pool-fiber3] DataSender: DataSender:  Unable to send category

output.log:
log4j:WARN No appenders could be found for logger (org.mortbay.log).

    But these are actually minor issues, it had NOTHING to do with my
stupid error:
I forgot to UNCOMMENT include-range in configuration file
discovery-configuration.xml:

<discovery-configuration threads="1" packets-per-second="1"
(Continue reading)

Permalink | Reply | 0 comments |
headers
Tom Powers | 14 Apr 2009 01:09

Friendly OpenNMS warning for Cisco


Sound Solutions, Inc.
8400 Highland Dr.
Wausau, WI  54401
Tel: 715-842-7665
Fax: 715-842-7620
Hello OpenNMSers
 
We have discovered something you may want to watch for.
 
Opennms 1.6.2 on Ubuntu (for what it matters)
 
On Cisco 3550 switches, running 12.2(44)SE1 the standard Opennms http service polling will kick off a memory leak in these switches.
 
This is resolved with se2 and higher (se6 is out now)
 
On a switch with 30+ mb ram...it took about 3 days to kick off the memory leak to where HTTP, HTTPS, Telnet and SSH failed. The switch still runs...but the memory pool shows full (steady decrease from point of monitoring)
 
 
This article talks about the http core services memory leak fixed first in SE2
 
 
We found this in an installation with 56 switches and every one of these 3550s (eight of them) with 12.2(44) SE1 leaked out. Older and newer switches all were fine.
 
Friendly heads up for all the help I've gotten from this site.
 
 
Thanks

Tom Powers
SSI
 
 
 
Sound Solutions, Inc.  - Since 1995
We Appreciate Your Business and Referrals

This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this message, or files associated with this message, is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. Messages sent to and from us may be monitored.

Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this message, or any attachment, that have arisen as a result of e-mail transmission. If verification is required, please request a hard-copy version. Any views or opinions presented are solely those of the author and do not necessarily represent those of the company. 

------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install
Permalink | Reply | 7 comments |
headers
Ronny Trommer | 14 Apr 2009 02:02

Re: Friendly OpenNMS warning for Cisco

Many thanks from a heavy Cisco user ;)

On Apr 14, 2009, at 1:09 AM, Tom Powers wrote:
On Cisco 3550 switches, running 12.2(44)SE1 the standard Opennms http service polling will kick off a memory leak in these switches.

 
------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install
Permalink | Reply | 0 comments |
headers
Tarus Balog | 14 Apr 2009 15:08
Favicon

Re: Friendly OpenNMS warning for Cisco


On Apr 13, 2009, at 7:09 PM, Tom Powers wrote:

> We have discovered something you may want to watch for.

Duly blogged: http://blogs.opennms.org/?p=783

-T
_______________________________________________________________________
Tarus Balog, OpenNMS Maintainer             Main:   +1 919 533 0160
The OpenNMS Group, Inc.                     Fax:    +1 773 345 3645
Email: tarus <at> opennms.org                    URL: http://www.opennms.org
PGP Key Fingerprint: 8945 8521 9771 FEC9 5481  512B FECA 11D2 FD82 B45C

------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install
Permalink | Reply | 5 comments |
headers
Tom Powers | 14 Apr 2009 15:47

Cisco Update: Talked with them this morning.

Sound Solutions, Inc.
8400 Highland Dr.
Wausau, WI 54401
Tel: 715-842-7665
Fax: 715-842-7620
Hello OpenNMSers...

After talking with Cisco this morning, and explaining our situation and
findings...this issue is not confined just the 3550 switches...it is all
Cisco catalyst switches with the 12.2(44)se1 revision IOS that are
affected. We were just lucky enough to have all 3550s in the environment
we caught this in.

Turns out the rest of the series switches, 2900's and such are affected
as well since they all use the same IOS.

Cisco also confirmed that polling of the http interface like opennms
does would aggravate this leak.

Tarus posted that turning off the http management would be a workaround,
and Cisco this morning confirmed that also, as well as upgrading the IOS
to se2 or better.

Thanks you all for your time and attention.

I attached  a bmp screen shot of the memory pool from one of the
affected switches so you all can see the steady leak from the point
monitoring was turned on.

Happy monitoring!!

Tom Powers
SSI

-----Original Message-----
From: Tarus Balog [mailto:tarus <at> opennms.org]
Sent: Tuesday, April 14, 2009 8:09 AM
To: Installation questions and help
Subject: Re: [opennms-install] Friendly OpenNMS warning for Cisco

On Apr 13, 2009, at 7:09 PM, Tom Powers wrote:

> We have discovered something you may want to watch for.

Duly blogged: http://blogs.opennms.org/?p=783

-T
_______________________________________________________________________
Tarus Balog, OpenNMS Maintainer             Main:   +1 919 533 0160
The OpenNMS Group, Inc.                     Fax:    +1 773 345 3645
Email: tarus <at> opennms.org                    URL: http://www.opennms.org
PGP Key Fingerprint: 8945 8521 9771 FEC9 5481  512B FECA 11D2 FD82 B45C

------------------------------------------------------------------------
------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of
this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install

--------------------------------------------------------------------------

Sound Solutions, Inc. - Since 1995
We Appreciate Your Business and Referrals

This message (and any associated files) is intended only for the use of the individual or entity to which it
is addressed and may contain information that is confidential, subject to copyright or constitutes a
trade secret. If you are not the intended recipient you are hereby notified that any dissemination,
copying or distribution of this message, or files associated with this message, is strictly prohibited.
If you have received this message in error, please notify us immediately by replying to the message and
deleting it from your computer. Messages sent to and from us may be monitored. 

Internet communications cannot be guaranteed to be secure or error-free as information could be
intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we
do not accept responsibility for any errors or omissions that are present in this message, or any
attachment, that have arisen as a result of e-mail transmission. If verification is required, please
request a hard-copy version. Any views or opinions presented are solely those of the author and do not
necessarily represent those of the company. 


------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install
Permalink | Reply | 1 comment |
headers
Les Mikesell | 14 Apr 2009 15:52
Picon

Re: Friendly OpenNMS warning for Cisco

Tarus Balog wrote:
> On Apr 13, 2009, at 7:09 PM, Tom Powers wrote:
> 
>> We have discovered something you may want to watch for.
> 
> Duly blogged: http://blogs.opennms.org/?p=783

Is there a convenient database-y way to disable http monitors on all 
router and switch interfaces?

--

-- 
   Les Mikesell
    lesmikesell <at> gmail.com

------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install
Permalink | Reply | 2 comments |
headers
Tom Powers | 14 Apr 2009 16:08

Re: Friendly OpenNMS warning for Cisco

Sound Solutions, Inc.
8400 Highland Dr.
Wausau, WI 54401
Tel: 715-842-7665
Fax: 715-842-7620
I had to turn it off by creating a different package in
poller-configuration.xml, filtering the switch ranges out of the
original package with an exclude statement, adding the switch ranges
into the new package by altering the include statement, and removing
http as a service from that new package.

Restart opennms and all was well.

Tom P 

-----Original Message-----
From: Les Mikesell [mailto:lesmikesell <at> gmail.com] 
Sent: Tuesday, April 14, 2009 8:52 AM
To: Installation questions and help
Subject: Re: [opennms-install] Friendly OpenNMS warning for Cisco

Tarus Balog wrote:
> On Apr 13, 2009, at 7:09 PM, Tom Powers wrote:
> 
>> We have discovered something you may want to watch for.
> 
> Duly blogged: http://blogs.opennms.org/?p=783

Is there a convenient database-y way to disable http monitors on all
router and switch interfaces?

-- 
   Les Mikesell
    lesmikesell <at> gmail.com

------------------------------------------------------------------------
------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of
this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install

--------------------------------------------------------------------------

Sound Solutions, Inc. - Since 1995
We Appreciate Your Business and Referrals

This message (and any associated files) is intended only for the use of the individual or entity to which it
is addressed and may contain information that is confidential, subject to copyright or constitutes a
trade secret. If you are not the intended recipient you are hereby notified that any dissemination,
copying or distribution of this message, or files associated with this message, is strictly prohibited.
If you have received this message in error, please notify us immediately by replying to the message and
deleting it from your computer. Messages sent to and from us may be monitored. 

Internet communications cannot be guaranteed to be secure or error-free as information could be
intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we
do not accept responsibility for any errors or omissions that are present in this message, or any
attachment, that have arisen as a result of e-mail transmission. If verification is required, please
request a hard-copy version. Any views or opinions presented are solely those of the author and do not
necessarily represent those of the company. 

------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install
Permalink | Reply | 0 comments |
headers
Tarus Balog | 14 Apr 2009 17:07
Favicon

Re: Friendly OpenNMS warning for Cisco


On Apr 14, 2009, at 9:52 AM, Les Mikesell wrote:

> Is there a convenient database-y way to disable http monitors on all
> router and switch interfaces?

Sure.

update ifservices set status='N' where serviceid in (select serviceid  
from service where servicename = 'HTTP') and nodeid in (select nodeid  
from node where [insert node criteria here]);

then restart

-T
_______________________________________________________________________
Tarus Balog, OpenNMS Maintainer             Main:   +1 919 533 0160
The OpenNMS Group, Inc.                     Fax:    +1 773 345 3645
Email: tarus <at> opennms.org                    URL: http://www.opennms.org
PGP Key Fingerprint: 8945 8521 9771 FEC9 5481  512B FECA 11D2 FD82 B45C

------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install
Permalink | Reply | 0 comments |
headers
W S | 15 Apr 2009 09:54
Picon

Re: Cisco Update: Talked with them this morning.

Wow.  Thank you for bringing this to the attention of the list!  It is
appreciated.

On Tue, Apr 14, 2009 at 7:47 AM, Tom Powers <tomp <at> sound-solutions.biz> wrote:
> Sound Solutions, Inc.
> 8400 Highland Dr.
> Wausau, WI 54401
> Tel: 715-842-7665
> Fax: 715-842-7620
> Hello OpenNMSers...
>
> After talking with Cisco this morning, and explaining our situation and
> findings...this issue is not confined just the 3550 switches...it is all
> Cisco catalyst switches with the 12.2(44)se1 revision IOS that are
> affected. We were just lucky enough to have all 3550s in the environment
> we caught this in.
>
> Turns out the rest of the series switches, 2900's and such are affected
> as well since they all use the same IOS.
>
> Cisco also confirmed that polling of the http interface like opennms
> does would aggravate this leak.
>
> Tarus posted that turning off the http management would be a workaround,
> and Cisco this morning confirmed that also, as well as upgrading the IOS
> to se2 or better.
>
> Thanks you all for your time and attention.
>
> I attached  a bmp screen shot of the memory pool from one of the
> affected switches so you all can see the steady leak from the point
> monitoring was turned on.
>
>
> Happy monitoring!!
>
> Tom Powers
> SSI
>
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: Tarus Balog [mailto:tarus <at> opennms.org]
> Sent: Tuesday, April 14, 2009 8:09 AM
> To: Installation questions and help
> Subject: Re: [opennms-install] Friendly OpenNMS warning for Cisco
>
>
> On Apr 13, 2009, at 7:09 PM, Tom Powers wrote:
>
>> We have discovered something you may want to watch for.
>
> Duly blogged: http://blogs.opennms.org/?p=783
>
> -T
> _______________________________________________________________________
> Tarus Balog, OpenNMS Maintainer             Main:   +1 919 533 0160
> The OpenNMS Group, Inc.                     Fax:    +1 773 345 3645
> Email: tarus <at> opennms.org                    URL: http://www.opennms.org
> PGP Key Fingerprint: 8945 8521 9771 FEC9 5481  512B FECA 11D2 FD82 B45C
>
>
> ------------------------------------------------------------------------
> ------
> This SF.net email is sponsored by:
> High Quality Requirements in a Collaborative Environment.
> Download a free trial of Rational Requirements Composer Now!
> http://p.sf.net/sfu/www-ibm-com
> _______________________________________________
> Please read the OpenNMS Mailing List FAQ:
> http://www.opennms.org/index.php/Mailing_List_FAQ
>
> opennms-install mailing list
>
> To *unsubscribe* or change your subscription options, see the bottom of
> this page:
> https://lists.sourceforge.net/lists/listinfo/opennms-install
>
>
>
> --------------------------------------------------------------------------
>
> Sound Solutions, Inc. - Since 1995
> We Appreciate Your Business and Referrals
>
> This message (and any associated files) is intended only for the use of the individual or entity to which it
is addressed and may contain information that is confidential, subject to copyright or constitutes a
trade secret. If you are not the intended recipient you are hereby notified that any dissemination,
copying or distribution of this message, or files associated with this message, is strictly prohibited.
If you have received this message in error, please notify us immediately by replying to the message and
deleting it from your computer. Messages sent to and from us may be monitored.
>
> Internet communications cannot be guaranteed to be secure or error-free as information could be
intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we
do not accept responsibility for any errors or omissions that are present in this message, or any
attachment, that have arisen as a result of e-mail transmission. If verification is required, please
request a hard-copy version. Any views or opinions presented are solely those of the author and do not
necessarily represent those of the company.
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> High Quality Requirements in a Collaborative Environment.
> Download a free trial of Rational Requirements Composer Now!
> http://p.sf.net/sfu/www-ibm-com
> _______________________________________________
> Please read the OpenNMS Mailing List FAQ:
> http://www.opennms.org/index.php/Mailing_List_FAQ
>
> opennms-install mailing list
>
> To *unsubscribe* or change your subscription options, see the bottom of this page:
> https://lists.sourceforge.net/lists/listinfo/opennms-install
>

------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install
Permalink | Reply | 0 comments |
headers
Sergey | 15 Apr 2009 11:33
Picon

problem with build OpenNMS 1.7.2

Hello.

I attempt to build 1.7.2 (I have need of SVG in Mozilla) and I'm
a beginner in Java. Can you suggest any way to deal with the problem ?

The problem:

[INFO] ------------------------------------------------------------------------
[INFO] Building OpenNMS
[INFO]    task-segment: [assembly:directory-inline] (aggregator-style)
[INFO] ------------------------------------------------------------------------
[WARNING] POM for 'org.codehaus.jackson:jackson-lgpl:pom:0.9.4:compile' is invalid. It will be
ignored for artifact resolution. Reason: Parse error reading POM. Reason: TEXT must be immediately
followed by END_TAG and not START_TAG (position: START_TAG seen ...<!-- Contact information -->\n\n 
<url>...  <at> 16:8)  for project org.codehaus.jackson:jackson-lgpl at /home/asy/.m2/repository/org/codehaus/jackson/jackson-lgpl/0.9.4/jackson-lgpl-0.9.4.pom
[WARNING] POM for 'org.codehaus.jackson:jackson-lgpl:pom:0.9.4:compile' is invalid. It will be
ignored for artifact resolution. Reason: Parse error reading POM. Reason: TEXT must be immediately
followed by END_TAG and not START_TAG (position: START_TAG seen ...<!-- Contact information -->\n\n 
<url>...  <at> 16:8)  for project org.codehaus.jackson:jackson-lgpl at /home/asy/.m2/repository/org/codehaus/jackson/jackson-lgpl/0.9.4/jackson-lgpl-0.9.4.pom
[WARNING] POM for 'org.codehaus.jackson:jackson-lgpl:pom:0.9.4:compile' is invalid. It will be
ignored for artifact resolution. Reason: Parse error reading POM. Reason: TEXT must be immediately
followed by END_TAG and not START_TAG (position: START_TAG seen ...<!-- Contact information -->\n\n 
<url>...  <at> 16:8)  for project org.codehaus.jackson:jackson-lgpl at /home/asy/.m2/repository/org/codehaus/jackson/jackson-lgpl/0.9.4/jackson-lgpl-0.9.4.pom
[WARNING] POM for 'org.codehaus.jackson:jackson-lgpl:pom:0.9.4:compile' is invalid. It will be
ignored for artifact resolution. Reason: Parse error reading POM. Reason: TEXT must be immediately
followed by END_TAG and not START_TAG (position: START_TAG seen ...<!-- Contact information -->\n\n 
<url>...  <at> 16:8)  for project org.codehaus.jackson:jackson-lgpl at /home/asy/.m2/repository/org/codehaus/jackson/jackson-lgpl/0.9.4/jackson-lgpl-0.9.4.pom
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD ERROR
[INFO] ------------------------------------------------------------------------
[INFO] Internal error in the plugin manager executing goal
'org.apache.maven.plugins:maven-assembly-plugin:2.1:directory-inline': Unable to find the mojo
'org.apache.maven.plugins:maven-assembly-plugin:2.1:directory-inline' in the plugin 'org.apache.maven.plugins:maven-assembly-plugin'
Component descriptor cannot be found in the component repository: org.apache.maven.plugin.Mojoorg.apache.maven.plugins:maven-assembly-plugin:2.1:directory-inline.
[INFO] ------------------------------------------------------------------------
[INFO] For more information, run Maven with the -e switch
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 53 minutes 37 seconds
[INFO] Finished at: Wed Apr 15 11:55:24 SAMST 2009
[INFO] Final Memory: 90M/161M
[INFO] ------------------------------------------------------------------------

--

-- 
Regards,
Sergey

------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-install mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-install
Permalink | Reply | 6 comments |

Gmane