Dump Executable | 1 Nov 13:30 2004
Picon

wireless access point

hi everyone, does anyone know where i can get a wireless access point that can span for a least 20 - 30 miles and is very good for non- line of sight. also operation in the 2.4GHz spectrom will be welcome

ALL-NEW Yahoo! Messenger - all new features - even more fun!
_______________________________________________
NoCat mailing list
NoCat <at> lists.nocat.net
http://lists.nocat.net/mailman/listinfo/nocat
Nate Slater | 2 Nov 06:20 2004
Picon

What do I specify as my gateway on my access point?

I'm attempting to setup a NoCat node in Eugene Oregon, but I have a few 
questions that I couldn't find answers to in the documentation. My 
setup is as follows:

wireless clients
   |
   |
access point
   |
   |
eth1
linux box with nocat gateway (10.0.1.2)
eth2
   |
   |
switch (internal wired network)
   |
   |
router box (hardware, not linux) (10.0.1.1)
   |
   |
The Internet

I want some wireless clients (members of the owner class) to be able to 
access my wired home network and others to only be able to access my 
outside Internet connection. Since I want the members of the owner 
class to effectively be on my internal wired network, I don't want the 
linux box running nocat gateway to be doing any NAT routing (I want to 
be able to run a server on a wireless client and access it from my 
wired network). Let's ignore security issues for now.

So:
1) Should my wireless clients, access point, and eth1 be on a different 
subnet then my wired network?
2) What do I specify as my gateway inside my access point setup (I'm 
using a LinkSys WAP11)--the linux box (10.0.1.2) or my gateway to the 
Internet (10.0.1.1)?
Thanks!

Peter
Marco Rossi | 3 Nov 17:03 2004
Picon

AuthServ Variables

I got a problem in setting up NoCat authentication
server on the gateway machine (SameMachine
architecture). 

In brief  I fed /usr/local/nocat/autheserv/htdocs in
an Apache virtual host, but when I access splash page
perl variables $GatewayName, $ConnectionCount etc. are
not expaned. Where am I wrong ? 

Thanks 

		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com 
Mathieu Bouchonnet | 3 Nov 19:00 2004
Picon

Re: Login witth same user/pass

Le Mon, 25 Oct 2004 11:09:33 +0200
"Omar Garcia" <omar.garcia <at> fractalia.biz> ecrivait:

> Hi list,
> 
> I have test login with 3 computers with same user / pass and its possible. The users authenticates against a
Mysql database.
> Could I disable this feature and prohibit login with same login/pass at the same time?
> 
> 
> Regards

Hi,

You could do this quite easyly by adding a flag in your mysql database when a user is logged in.
Then when you do your query to check the password, you could just add a "select " to see if it is the case.

Here, when a user logs in, we add an entry in our dns server (on the nocat box) to match the user name given with
the ip adress.
So if someone logs into the WIFI, his computer name will be student00048545.escp.edu, if someone else
tries to log in using the same name, we'll have two computers with the same name, but it should be easy to
check if a name already exist then we just close the connection.

Regards,
Mathieu Bouchonnet
Omar Garcia | 4 Nov 09:00 2004

Re: Login witth same user/pass

Thanks you
I´ll try it.

Regards.
----- Original Message ----- 
From: "Mathieu Bouchonnet" <mbouchonnet <at> escp-eap.net>
To: <nocat <at> lists.nocat.net>
Sent: Wednesday, November 03, 2004 7:00 PM
Subject: Re: [NoCat] Login witth same user/pass

> Le Mon, 25 Oct 2004 11:09:33 +0200
> "Omar Garcia" <omar.garcia <at> fractalia.biz> ecrivait:
>
> > Hi list,
> >
> > I have test login with 3 computers with same user / pass and its
possible. The users authenticates against a Mysql database.
> > Could I disable this feature and prohibit login with same login/pass at
the same time?
> >
> >
> > Regards
>
> Hi,
>
> You could do this quite easyly by adding a flag in your mysql database
when a user is logged in.
> Then when you do your query to check the password, you could just add a
"select " to see if it is the case.
>
> Here, when a user logs in, we add an entry in our dns server (on the nocat
box) to match the user name given with the ip adress.
> So if someone logs into the WIFI, his computer name will be
student00048545.escp.edu, if someone else tries to log in using the same
name, we'll have two computers with the same name, but it should be easy to
check if a name already exist then we just close the connection.
>
> Regards,
> Mathieu Bouchonnet
> _______________________________________________
> NoCat mailing list
> NoCat <at> lists.nocat.net
> http://lists.nocat.net/mailman/listinfo/nocat
ds10025 | 4 Nov 10:43 2004
Picon
Picon

Can not create new user with admintool

|Datasource set to Passwd

Admintool returns following error:

[2004-11-04 09:33:12] Missing UserIDField directive required for 
NoCat::User object!
[2004-11-04 09:33:12] Missing UserPasswdField directive required for 
NoCat::User object!
Can't load class 'NoCat::Source::DBI': Can't locate DBI.pm in  <at> INC ( <at> INC 
contains: /usr/local/nocat/authserv/bin/../lib /usr/local/nocat/gw/lib 
/usr/lib/perl5/5.8.1/i586-linux-thread-multi /usr/lib/perl5/5.8.1 
/usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl 
/usr/lib/perl5/vendor_perl/5.8.1/i586-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at 
/usr/local/nocat/authserv/bin/../lib/NoCat/Source/DBI.pm line 4, <FILE> line 1.
BEGIN failed--compilation aborted at 
/usr/local/nocat/authserv/bin/../lib/NoCat/Source/DBI.pm line 4, <FILE> line 1.
Compilation failed in require at (eval 1) line 3, <FILE> line 1.
  at ./admintool line 121
gw2:/usr/local/nocat/authserv/bin #
Bruno LAURET | 4 Nov 11:59 2004
Picon

Radius and public class

Hi from reunion island (French),

I use nocatauth with radius server (Freeradius), I want use all class
(Public, Coop, Owner) with authentication. 

I already use dictionary.nocat but the nocat.log report only "class
member". I can access public class when I skip authentication on the
login page. How use public class with authentication with radius server?

Thank!!!
Bruno LAURET | 4 Nov 13:50 2004
Picon

RE : Radius and public class

Hi,
I understand  but is it well possible to impose an authentication for the public class or to impose a flow for
the class owner (not warps the band-width)?
I want to attribute a different bandwidth per group.
Or can I creat a new class Coop? (Coop2)
Thank's

-----Message d'origine-----
De : ulrich schwarz [mailto:ulrich.schwarz <at> kiz.uni-ulm.de] 
Envoyé : jeudi 4 novembre 2004 15:48
À : Bruno LAURET
Objet : Re: [NoCat] Radius and public class

Bruno LAURET schrieb:
> Hi from reunion island (French),
> 
> I use nocatauth with radius server (Freeradius), I want use all class
> (Public, Coop, Owner) with authentication. 
> 
> I already use dictionary.nocat but the nocat.log report only "class
> member". I can access public class when I skip authentication on the
> login page. How use public class with authentication with radius server?

hi bruno,

as far as i understand the public class is meant to be without any 
authentication by definition. as you said correctly, users get in the 
public class by hitting the skip-button.

the difference between the coop and owner class is wether they are 
listed as owners in nocat.conf or not. they both have to authenticate.

HTH, regards

ulric
seberino | 4 Nov 20:15 2004
Picon

NoCat redirects HTML but lets (all?) other ports through right?

NoCat beautifully redirects web surfers to my click through splash page.
I noticed however that I can always SSH and send email thru the
captive portal.  Is this right? normal? desired??

Don't we want to deny clients all Internet services until they
go through click through splash page?

Chris

--
_______________________________________

Christian Seberino, Ph.D.
SPAWAR Systems Center San Diego
Code 2872
49258 Mills Street, Room 158
San Diego, CA 92152-5385
U.S.A.

Phone: (619) 553-9973
Fax  : (619) 553-6521
Email: seberino <at> spawar.navy.mil
_______________________________________
Joost B. de Niet | 4 Nov 20:38 2004
Picon

RE: NoCat redirects HTML but lets (all?) other ports throughright?

Hi,

I assume you are talking about NocatAuth.

You can adjust the firewall/iptables to your needs
Set it to whatever you like. 

Assure you compiled iptables and your kernel correctly.

Bye,

JB

-----Oorspronkelijk bericht-----
Van: nocat-bounces <at> lists.nocat.net [mailto:nocat-bounces <at> lists.nocat.net]
Namens seberino <at> spawar.navy.mil
Verzonden: donderdag 4 november 2004 20:15
Aan: nocat <at> lists.nocat.net
Onderwerp: [NoCat] NoCat redirects HTML but lets (all?) other ports
throughright?

NoCat beautifully redirects web surfers to my click through splash page.
I noticed however that I can always SSH and send email thru the captive
portal.  Is this right? normal? desired??

Don't we want to deny clients all Internet services until they go through
click through splash page?

Chris

--
_______________________________________

Christian Seberino, Ph.D.
SPAWAR Systems Center San Diego
Code 2872
49258 Mills Street, Room 158
San Diego, CA 92152-5385
U.S.A.

Phone: (619) 553-9973
Fax  : (619) 553-6521
Email: seberino <at> spawar.navy.mil
_______________________________________
_______________________________________________
NoCat mailing list
NoCat <at> lists.nocat.net
http://lists.nocat.net/mailman/listinfo/nocat

Gmane