Mathias Kettner | 1 Mar 10:06 2013
Picon

Re: [Check_mk (english)] UI Change request

Hi JB,

we've meanwhile improved the command form a bit. Now hitting enter in 
one of the text entry executes the correct command. This should save you
a lot of tabs....

Mathias

Am 09.03.2012 18:57, schrieb JB Segal:
> When you go to acknowledge a problem, working from the top of the screen, you:
> - Skip over the Acknowlege/Remove Acknowlegement buttons
> - Do something (or not) with the Sticky/Send/Persistent checkboxes (I
> usually unclick 'send notification')
> - Enter some text in the Comment box (mandatory)
> - Go back up to the Ack button and hit it
> - Hit Yes! on the next screen.
>
> If you're working primarily via keyboard, you have to Shift-Tab 5
> times from the Comment box to the Ack button.
>
> Instead, I really think the UX would be better if it was
> - Do something (or not) with the Sticky/Send/Persistent checkboxes (I
> usually unclick 'send notification')
> - Enter some text in the Comment box (mandatory)
> - Hit the Ack button below the comment box.
> - Hit Yes! on the next screen.
>
> Via KB, that's one tab from Comment box to Ack button (and the Yes!
> button seems to be one tab away on the next screen, which is good).
>
(Continue reading)

Mathias Kettner | 1 Mar 12:38 2013
Picon

Re: [Check_mk (english)] Wrong values for swap in hr_mem (1.2.0p3)

Hi Michael,

thanks for your feedback. The #1 has already been fixed some weeks ago. 
The #2 has been fix a couple of minutes ago in both 1.2.2 and master
branch. Could you check again?

Mathias

Am 11.12.2012 14:32, schrieb Michaël COQUARD:
> Hello,
>
> I've found two littles issues on the "hr_mem" plugin.
>
> 1#
> On some devices, the amount of SWAP is reported as the amount of the
> virtual memory (SWAP + physical RAM) and therefore the total memory
> reported is also wrong (equals to SWAP+2*RAM).
>
> Here is the explanation and a little workaround :
>
> At the beginning of the check function, the values are stored in a
> dictionary whose keys are the type of the "memory space" in the device :
>
> ==========================================
> def check_hr_mem(item, params, info):
>      usage = {}
>      for hrtype, hrdescr, hrunits, hrsize, hrused in info:
>          if hrtype in [ ".1.3.6.1.2.1.25.2.1.2",
>                         ".1.3.6.1.2.1.25.2.1.3" ]:
>              size = saveint(hrsize) * saveint(hrunits) / 1048576.0
(Continue reading)

Mathias Kettner | 1 Mar 12:48 2013
Picon

Re: [Check_mk (english)] [PATCH] Fix wmic_process to report average cpu usage for multiple cpu cores.

Hi William,

please could you resubmit your patch (perfect would be a reall
patch created with git diff or diff -ur) agains the current
version?

Greetings,

Mathias

Am 17.01.2013 17:45, schrieb William Baum:
> Hi Florian,
>
> I did check the "known issues and feedback" page, which merely says:
> "For reporting bugs and problems please contact our mailinglists
> <http://mathias-kettner.com/check_mk_lists.html> or our feedback
> <mailto:feedback@...?subject=[Bug]:> address."
>
> For submitting patches, the list seems more appropriate as it allows for
> broader discussion and collaboration, allows others to find and apply
> the patch if they choose, etc..  If the developers would really prefer
> patches or other submissions sent to the feedback address instead of, or
> in addition to the list, that should be made more clear.
>
> As for this issue, I should have started by describing the problem in
> greater detail, as it's not at all obvious until you've experienced the
> issue.
>
> This change brings the windows process check much more in line with what
> one would expect from the way it's described, output from other windows
(Continue reading)

Mathias Kettner | 1 Mar 12:57 2013
Picon

Re: [Check_mk (english)] Custom notification are sent on contacts with disabled notification

Hi Jan,

this config seems to be OK. What your email.sh and sms.sh exactly do,
I cannot know. Please also have a look into the Nagios logfile whether
notifications for each user are triggered or not.

Mathias

Am 22.01.2013 16:57, schrieb Jan Krajdl:
> Ok, these are two users which has assigned contact group:
>
> u'jan.krajdl <at> ---.cz': {'alias': u'jan.krajdl <at> ---.cz',
>                                 'contactgroups': ['Company'],
>                                 'email': 'jan.krajdl <at> ---.cz',
>                                 'host_notification_commands':
> 'check-mk-notify',
>                                 'host_notification_options': 'durfs',
>                                 'notification_method': 'email',
>                                 'notification_period': '24X7',
>                                 'notifications_enabled': False,
>                                 'pager': '+420606------',
>                                 'service_notification_commands':
> 'check-mk-notify',
>                                 'service_notification_options': 'wucrfs'},
>
> 'spm': {'alias': u'SPM',
>           'contactgroups': ['Company'],
>           'email': 'spm <at> ---.cz',
>           'host_notification_commands': 'check-mk-notify',
>           'host_notification_options': 'durfs',
(Continue reading)

Carl Pelletier | 1 Mar 15:59 2013
Picon

[Check_mk (english)] warning reported by check_mk 1.2.0p4 that i dont understand...

Hi, I installed check_mk on a windows server 2003 and I receive this warning by check_mk:

WARN - Missing agent sections: windows_updates - execution time....

Can you please explain me why and how to correct that? I dont see any informations in the documentation about that.

I sure I miss something, as usual!

Thanks for Any help!

Carl Pelletier
Nagios/check_mk Lover ;=)
_______________________________________________
checkmk-en mailing list
checkmk-en@...
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en
Carl Pelletier | 1 Mar 16:07 2013
Picon

[Check_mk (english)] problem with check_mk on windows

Hi, check_mk crash on windows every 15 minutes ....

I enable de debug flags..

Version: 1.2.0p4
Windows server 2003.

The error I receive in the crash.log:

0.000000 Opened crash log at Mar 01 09:31:40.
0.000000 Accepted client connection from 10.4.89.197.
0.000000 <<<check_mk>>>
0.000000 <<<uptime>>>
0.000000 <<<df>>>
0.000000 <<<ps>>>
0.000000 <<<mem>>>
0.000000 <<<fileinfo>>>
0.000000 <<<services>>>
0.109378 <<<winperf_phydisk>>>
0.109378  - read performance data, buffer size 3752
0.109378 <<<winperf_processor>>>
0.109378  - read performance data, buffer size 2144
0.109378 <<<logwatch>>>
0.109378  - event log "Altiris Console Manager":
0.109378    . successfully opened event log
0.109378  - event log "AltirisDataManager":
0.109378    . successfully opened event log
0.125003  - event log "Application":
0.125003    . successfully opened event log
0.125003    . got entries starting at 95001 (18904 bytes)
0.125003    . got entries starting at 95001 (18904 bytes)
0.125003      - record 95001: no DLLs listed in registry
0.125003      - record 95001: translation failed




The error in the Event log:

Le service Check_MK_Agent s'est terminé de manière inattendue. Ceci s'est produit 1 fois. L'action corrective suivante va être effectuée dans 60000 millisecondes : Redémarrer le service.

Pour plus d'informations, consultez le centre Aide et support à l'adresse http://go.microsoft.com/fwlink/events.asp.


_______________________________________________
checkmk-en mailing list
checkmk-en@...
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en
cristian.calin | 1 Mar 16:11 2013

[Check_mk (english)] esxi support

Hello,

 

I’ve seen that there appeared a new agent and a new set of checks for vsphere esxi.

Any documentation available on how to configrure them ?

 

Kind regards,

Cristian Calin

_________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, France Telecom - Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, France Telecom - Orange is not liable for messages that have been modified, changed or falsified. Thank you.
_______________________________________________
checkmk-en mailing list
checkmk-en@...
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en
fortuik | 4 Mar 00:46 2013
Picon

[Check_mk (english)] livestatus 1.2.2

Hi,
does some of you experience problems with the new 1.2.2 livestatus?
It looks as a livestatus update b/n 1.2.0p4 and 1.2.2b breaks some stuff,
until now I run into two issues.

Issue 1
if 5 or more services are rescheduled (sequently) from the multisite
icon_reload,
the multisite ui becomes unresponsible and sometimes nagios dies
(this is not reproducible on every try).

Issue 2
nagios sigterms on logrotate and never come back if a service is in downtime

how to test (rhel 6.4):
install nagios from epel on rhel/centos
install check_mk 1.2.2
setup  livestatus broker_module
set log_rotation_method to hourly
set any service in downtime  (2 hours is enough)

result:
after the planned log rotate nagios will not run
(last log message: ‘Caught SIGSEGV, shutting down...’)

Best Regards
Mäkelä, Antti | 4 Mar 07:26 2013
Picon

Re: [Check_mk (english)] livestatus 1.2.2

I don't know about the former but the latter indeed fits my experienced issue. As a workaround, I've set up a
cronjob that restarts nagios 1 minute after midnight (when logrotate occurs)

--
- Antti Mäkelä | Senior Architect | CCIE #20962 -
- Vintor Oy, Itsehallintokuja 6, 02600 Espoo | www.vintor.fi -
________________________________________
From: checkmk-en-bounces@...
[checkmk-en-bounces <at> lists.mathias-kettner.de] on behalf of fortuik [fortuik@...]
Sent: Monday, March 04, 2013 1:46
To: checkmk-en@...
Subject: [Check_mk (english)] livestatus 1.2.2

Hi,
does some of you experience problems with the new 1.2.2 livestatus?
It looks as a livestatus update b/n 1.2.0p4 and 1.2.2b breaks some stuff,
until now I run into two issues.

Issue 1
if 5 or more services are rescheduled (sequently) from the multisite
icon_reload,
the multisite ui becomes unresponsible and sometimes nagios dies
(this is not reproducible on every try).

Issue 2
nagios sigterms on logrotate and never come back if a service is in downtime

how to test (rhel 6.4):
install nagios from epel on rhel/centos
install check_mk 1.2.2
setup  livestatus broker_module
set log_rotation_method to hourly
set any service in downtime  (2 hours is enough)

result:
after the planned log rotate nagios will not run
(last log message: ‘Caught SIGSEGV, shutting down...’)

Best Regards
_______________________________________________
checkmk-en mailing list
checkmk-en@...
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en
Randal, Phil | 4 Mar 12:07 2013
Picon

Re: [Check_mk (english)] livestatus 1.2.2

I too had the logrotate issue, intermittently.

Not seeing it with nagios 3.5.0RC1 and check_mk 1.2.2b3, but that might just be luck.

Phil

-----Original Message-----
From: checkmk-en-bounces <at> lists.mathias-kettner.de
[mailto:checkmk-en-bounces <at> lists.mathias-kettner.de] On Behalf Of Mäkelä, Antti
Sent: 04 March 2013 06:27
To: fortuik; checkmk-en <at> lists.mathias-kettner.de
Subject: Re: [Check_mk (english)] livestatus 1.2.2

I don't know about the former but the latter indeed fits my experienced issue. As a workaround, I've set up a
cronjob that restarts nagios 1 minute after midnight (when logrotate occurs)

--
- Antti Mäkelä | Senior Architect | CCIE #20962 -
- Vintor Oy, Itsehallintokuja 6, 02600 Espoo | www.vintor.fi - ________________________________________
From: checkmk-en-bounces <at> lists.mathias-kettner.de
[checkmk-en-bounces <at> lists.mathias-kettner.de] on behalf of fortuik [fortuik <at> gmail.com]
Sent: Monday, March 04, 2013 1:46
To: checkmk-en <at> lists.mathias-kettner.de
Subject: [Check_mk (english)] livestatus 1.2.2

Hi,
does some of you experience problems with the new 1.2.2 livestatus?
It looks as a livestatus update b/n 1.2.0p4 and 1.2.2b breaks some stuff, until now I run into two issues.

Issue 1
if 5 or more services are rescheduled (sequently) from the multisite icon_reload, the multisite ui
becomes unresponsible and sometimes nagios dies (this is not reproducible on every try).

Issue 2
nagios sigterms on logrotate and never come back if a service is in downtime

how to test (rhel 6.4):
install nagios from epel on rhel/centos
install check_mk 1.2.2
setup  livestatus broker_module
set log_rotation_method to hourly
set any service in downtime  (2 hours is enough)

result:
after the planned log rotate nagios will not run (last log message: ‘Caught SIGSEGV, shutting down...’)

Best Regards
_______________________________________________
checkmk-en mailing list
checkmk-en <at> lists.mathias-kettner.de
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en

_______________________________________________
checkmk-en mailing list
checkmk-en <at> lists.mathias-kettner.de
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en

“Any opinion expressed in this e-mail or any attached files are those of the individual and not
necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This
e-mail and any attached files are confidential and intended solely for the use of the addressee. This
communication may contain material protected by law from being passed on. If you are not the intended
recipient and have received this e-mail in error, you are advised that any use, dissemination,
forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail
in error please contact the sender immediately and destroy all copies of it.
_______________________________________________
checkmk-en mailing list
checkmk-en <at> lists.mathias-kettner.de
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en

Gmane