headers
Whisky | 1 Aug 2006 09:06

IP aliasing / multiple network interfaces

Dear list members,

I am using mrtg 2.14.3 on a Debian (testing) Server. SNMPD is installed as
well.

The machine has 64 IP addresses and the interfaces are named eth0, eth0:1,
eth0:2, eth0:3, etc. Is it possible to set up mrtg to monitor all these
interfaces? My goal is to generate monthly (and daily) traffic statistics
for each IP address.

I've already tried to find some info about mrtg together with ip
aliasing/multiple interfaces but as I am quite the mrtg newbie, I haven't
found anything usefull yet. Some instructions would be very much
appreciated.

Thank you very much for your efforts,

Stefan

--
Unsubscribe mailto:mrtg-request <at> list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
Permalink | Reply | 1 comment |
headers
Syed Waqqas Ahmed | 1 Aug 2006 17:04
Picon
Favicon

help required on ATM IMA mrtg

HI ALL,

  I am having problem in polling ATM IMA of E1s from PSAX (Lucent) ... 
the mrtg was working perfectly instially recently we have upgraded the 
firmware of PSAX and after that some IMA are showing 100 % ulization on 
inward traffic while outbound traffic is correct... i mentioning the 
configuration and the output for the refrence ... can some one plz help 
me out.....

  Target[huaweie1marston]: 
1.3.6.1.4.1.1751.2.18.11.1.1.3.822006&1.3.6.1.4.1.1751.2.18.11.1.1.9.822006:xxxx <at> x.x.x.x *53
MaxBytes[huaweie1marston]: 512000
Options[huaweie1marston]: growright, bits
Title[huaweie1marston]: HUAWEI 2 E1s IMA Marston
PageTop[huaweie1marston]: <H1 align="left">HUAWEI 2 E1s IMA 
Marston</H1>

   
  secondly i tried to pool E1 ima from DSLAM but dont have OIDs of 
Huawei MA5100 DSLAM E1 IMA..  so if any 1 can provide the OIDs of huawei 
MA5100 DSLAM that will be a great help as well.
  -- Attached file removed by Ecartis and put at URL below --
-- Type: image/x-png
-- Desc: 2643378099-huawei-khi-marston-daily.png
-- Size: 4k (4987 bytes)
-- URL : http://lists.ee.ethz.ch/p/huawei-khi-marston-daily.png

-- Attached file removed by Ecartis and put at URL below --
-- Type: image/x-png
-- Desc: 958632809-huawei-khi-marston-weekly.png
(Continue reading)

Permalink | Reply | 0 comments |
headers
Guillermo Hechem | 2 Aug 2006 18:01
Picon
Favicon

Box migration issue

Hi,

I've been running MRTG + RRDTOOL under Windows for some time now without any 
problems. I recently had to move the installation to another box, so I used 
the latest versions of all the programs involved.
I copied all of the config files from one server to the other and now I see 
that the RRDs are not being updated. Using the -logging option in MRTG I get 
the following error:

Can't find string terminator ")" anywhere before EOF at (eval 14) line 1

The software used is:

Old server:
MRTG 2.11.1
RRDTOOL 1.0.49
ActivePerl 5.8.6.811
Windows 2000 SP4

New server:
MRTG 2.14.4
RRDTOOL 1.2.10
Active Perl 5.8.8.817
Windows 2000 SP4

Any ideas? I found that only a very few people had this issue and couldn't 
find any solution to it.

Thanks in advance.
(Continue reading)

Permalink | Reply | 2 comments |
headers
nguehou merlin | 2 Aug 2006 20:59
Picon
Favicon

Customer Traffic graph in linux

Dear Team,
I have set up a traffic controller and QoS in Red Hat
9.0 machine with 2 eth interfaces . this is to control
my customer traffic utilization and queue behind this
server .
Question:
Is it possible to configure MRTG to sort bandwidth
utilization graph per customer?
If ok, what kind of tools can i use
Thankl in advance for ur help
Marlan

	

	
		
___________________________________________________________________________ 
Découvrez un nouveau moyen de poser toutes vos questions quelque soit le sujet ! 
Yahoo! Questions/Réponses pour partager vos connaissances, vos opinions et vos expériences. 
http://fr.answers.yahoo.com 

--
Unsubscribe mailto:mrtg-request <at> list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
Permalink | Reply | 0 comments |
headers
nguehou merlin | 2 Aug 2006 21:12
Picon
Favicon

Graph Client network utilization in Linux server

Dear Team,
I have set up a traffic controller and QoS in Red Hat
9.0 machine with 2 eth interfaces . this is to control
my customer traffic utilization and queue behind this
server .
Question:
Is it possible to configure MRTG to sort bandwidth
utilization graph per customer?
If ok, what kind of tools can i use
Thankl in advance for ur help
Marlan

	

	

	
		
___________________________________________________________________________ 
Découvrez un nouveau moyen de poser toutes vos questions quelque soit le sujet ! 
Yahoo! Questions/Réponses pour partager vos connaissances, vos opinions et vos expériences. 
http://fr.answers.yahoo.com 

--
Unsubscribe mailto:mrtg-request <at> list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
(Continue reading)

Permalink | Reply | 0 comments |
headers
Christopher Noyes | 2 Aug 2006 22:30
Favicon

routers2.cgi and apache authentication

Hello,
   I am using routers2.cgi with mrtg.  I am running Apache 2.2.0.  I 
enabled authentication for the entire document directory and now when I 
access routers2.cgi it keeps prompting the username and password for each 
graphic load.  Has anyone seen anything like this before?  Thanks for any 
information.

-Chris Noyes

--
Unsubscribe mailto:mrtg-request <at> list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
Permalink | Reply | 1 comment |
headers
Steve Shipway | 2 Aug 2006 23:41
Picon
Picon
Favicon

Re: routers2.cgi and apache authentication

>    I am using routers2.cgi with mrtg.  I am running Apache 
> 2.2.0.  I enabled authentication for the entire document 
> directory and now when I access routers2.cgi it keeps 
> prompting the username and password for each graphic load.  
> Has anyone seen anything like this before?  Thanks for any 
> information.

This could mean that you've not set the authentication up correctly with
the same realm on all directories (and in any case, you only *really*
need to have authentication set on the routers2.cgi script) or else
(more likely) you have a time synch problem between your web server and
browser.  Auth cookies can have times set, so make sure your web server
and client both have the clocks set right.

Steve

--
Unsubscribe mailto:mrtg-request <at> list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
Permalink | Reply | 0 comments |
headers
mailing list | 3 Aug 2006 01:03
Picon

RRDs object version.

Hi All,
 I am trying to implement MRTG for my company. We have RHEL 4 AS and I have
installed the following to implement MRTG:

mrtg-2.13.2.tar.gz
rrdtool-1.2.13-1.el4.rf.i386.rpm and perl-rrdtool-1.2.13-1.el4.rf.i386.rpm.

I can see the MRTG generated graphs fine but the problem appears when I use
the LogFormat: rrdtool in .cfg file then i can see the following error in
mrtg.log

" RRDs object version 1.2014 does not match bootstrap parameter 1.2013 at
/usr/lib/perl5/5.8.5/i386-linux-thread-multi/DynaLoader.pm line 253."
Same appears when i do:

perl -e 'use RRDs; print "Ver ".$RRDs::VERSION."\n";'

I also tried to use mrtg-2.14.4.tar.gz and compiled rrdtool.tar.gz(1.2.15)
but got the same error except for the "bootstrap parameter 1.2015"

Any help will be appreciated

Thanks,

--
Unsubscribe mailto:mrtg-request <at> list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
(Continue reading)

Permalink | Reply | 2 comments |
headers
mailing list | 3 Aug 2006 01:13
Picon

RRDs object version.

Hi All,
 I am trying to implement MRTG for my company. We have RHEL 4 AS and I have
installed the following to implement MRTG:

mrtg-2.13.2.tar.gz
rrdtool-1.2.13-1.el4.rf.i386.rpm and perl-rrdtool-1.2.13-1.el4.rf.i386.rpm.

I can see the MRTG generated graphs fine but the problem appears when I use
the LogFormat: rrdtool in .cfg file then i can see the following error in
mrtg.log

" RRDs object version 1.2014 does not match bootstrap parameter 1.2013 at
/usr/lib/perl5/5.8.5/i386-linux-thread-multi/DynaLoader.pm line 253."
Same appears when i do:

perl -e 'use RRDs; print "Ver ".$RRDs::VERSION."\n";'

I also tried to use mrtg-2.14.4.tar.gz and compiled rrdtool.tar.gz(1.2.15)
but got the same error except for the "bootstrap parameter 1.2015"

Any help will be appreciated

Thanks,

--
Unsubscribe mailto:mrtg-request <at> list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi
(Continue reading)

Permalink | Reply | 0 comments |
headers
Steve Shipway | 3 Aug 2006 01:16
Picon
Picon
Favicon

Re: RRDs object version.

> " RRDs object version 1.2014 does not match bootstrap 
> parameter 1.2013 at 
> /usr/lib/perl5/5.8.5/i386-linux-thread-multi/DynaLoader.pm line 253."

You have two versions of the RRDtool libraries installed -- 1.2014 and
1.2013.  Unfortunately, you are using the RRDs.pm version 1.2013 but it
isloading the v1.2014 rrds.so library, hence the mismatch.  This is
probably due to the order of your  <at> INC path in Perl.

What you need to do is to remove all instances of the 2.013 (preferably,
ALL RRDtool perl libraries) and reinstall.

Look for files RRDs.pm and rrds.so under /usr/lib/perl5 and also under
/usr/local and anywhere else you may have installed RRDTool.

find /usr/local /usr/lib/perl5 -name 'RRDs.*' -print

You might find more than one version of each of them, hence the problem.
We have:

/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/RRDs.pm
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/auto/RRDs/RRDs.so
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/auto/RRDs/RRDs.bs
/usr/local/rrdtool-1.0.50/man/man1/RRDs.1
/usr/local/rrdtool-1.0.50/doc/RRDs.txt
/usr/local/rrdtool-1.0.50/html/RRDs.html

(not counting old stuff in the src directory).  You might have things in
a different subdirectory of site_perl, or under
/usr/local/rrdtool-*/lib/perl
(Continue reading)

Permalink | Reply | 1 comment |

Gmane