Aneesh A.V | 1 Aug 06:56 2003
Picon

Re: Help Needed

Check the error.log or record.log and find the specific reason and mail back with the error code.

bye

aneesh

Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
Jitender Arora | 1 Aug 07:22 2003
Picon

Re: jabberd 1.4.2 openLdap authentication

Refer to the xdb_auth_cpile module for LDAP authentication. You can download
this from here http://www.snoogans.co.uk/jabber/index.htm#xdb_auth_cpile

Regards
Jitender

----- Original Message ----- 
From: "BShrinivas" <srinivas.bolli <at> exaband.net>
To: <jadmin <at> jabber.org>
Sent: Thursday, July 31, 2003 7:01 PM
Subject: [jadmin] jabberd 1.4.2 openLdap authentication

> Hi,
> I am running Jabberd-1.4.2 server and want to autheticate IM users
> through our openLDAP. Can anyone tell me how to autheticate users
> through openLDAP.
>
> Thanx.
>
> Regards-
> shrini
>
> --
> Shrinivas Bolli
> Exaband (India) Private Limited,
> 24,Shantiniketan,
> East Marredpally,
> Secunderabad-26.
>
>
****************************************************************************
*****
>
>
> This email and any files transmitted along with it are confidential and
> intended
> solely for the use of the individual or entity to whom they are
> addressed.
>
> Mail recipients and senders are bound by the
> EXABAND (INDIA) PRIVATE LIMITED Non-Disclosure Policy.
>
> If you have not signed the Non-Disclosure Policy or if you feel you have
>
> received this mail in error, please notify security <at> exaband.net
>
****************************************************************************
*****
>
>
>
>
> _______________________________________________
> jadmin mailing list
> jadmin <at> jabber.org
> http://mailman.jabber.org/listinfo/jadmin
>
Rick_Tabit | 1 Aug 10:00 2003

Rick Tabit/BOS/US/Vpharm is out of the office.


I will be out of the office starting  08/01/2003 and will not return until
08/05/2003.

I will still recieve this message and respond when I return.  Problems
requiring immediate attention, please send mail to  IS_PROBLEMS <at> VPHARM.COM.
BShrinivas | 1 Aug 11:12 2003
Picon

jabberd1.4.2 LDap authentication

Hi,
I am running Jabberd-1.4.2 server and want to autheticate IM users
through our openLDAP. Can anyone tell me how to autheticate users
through openLDAP instead of authentication through the user.xml file

Thanx.

Regards-
shrini

--
Shrinivas Bolli
Exaband (India) Private Limited,
24,Shantiniketan,
East Marredpally,
Secunderabad-26.

*********************************************************************************

This email and any files transmitted along with it are confidential and
intended
solely for the use of the individual or entity to whom they are
addressed.

Mail recipients and senders are bound by the
EXABAND (INDIA) PRIVATE LIMITED Non-Disclosure Policy.

If you have not signed the Non-Disclosure Policy or if you feel you have

received this mail in error, please notify security <at> exaband.net
*********************************************************************************
Denis Gueyffier | 1 Aug 12:26 2003
Picon

Re: jabberd1.4.2 LDap authentication

You should have a look at the 
xdb_ldap module :
http://www.jabberstudio.org/cgi-bin/viewcvs.cgi/xdb_ldap/

best,

Denis Gueyffier

-------Original Message-------

From: jadmin <at> jabber.org
Date: Friday, August 01, 2003 11:54:16
To: jadmin <at> jabber.org
Subject: [jadmin] jabberd1.4.2 LDap authentication

Hi,
I am running Jabberd-1.4.2 server and want to autheticate IM users
through our openLDAP. Can anyone tell me how to autheticate users
through openLDAP instead of authentication through the user.xml file

Thanx.

Regards-
shrini

--
Shrinivas Bolli
Exaband (India) Private Limited,
24,Shantiniketan,
East Marredpally,
Secunderabad-26.

*********************************************************************************

 
This email and any files transmitted along with it are confidential and
intended
solely for the use of the individual or entity to whom they are
addressed.

Mail recipients and senders are bound by the
EXABAND (INDIA) PRIVATE LIMITED Non-Disclosure Policy.

If you have not signed the Non-Disclosure Policy or if you feel you have

received this mail in error, please notify security <at> exaband.net
*********************************************************************************

 

 
_______________________________________________
jadmin mailing list
jadmin <at> jabber.org
http://mailman.jabber.org/listinfo/jadmin
.
Steve Spencer | 1 Aug 14:14 2003

Re: HUP for jabberd??

Paul,

Thanks!  There was some question in my mind about whether this was
working as one would expect, but i didn't see anything in the docs about
it.  I'll be HUP'n now :)

On Thu, 31 Jul 2003, The DNS/Email Guy wrote:

>
> Steve,
>
> Hi! I too am a newbie to this jabber world, BUT yes, the jabberd daemon
> does act like other Unix/Linux daemons, and it will re-read changes to the
> configuration files if you 'HUP' it. You can see the message if you tail
> the error.log file. So, HUP away!
>
> bytheby, do you happen to have Jabber User Directory (JUD) services working
> on your server? I am having a 'Charles Dickens' of a time trying to get it
> to work...
No.  Sorry.  The environment i'm building for only has about 15 users.
>
> PEV
>
> At 02:01 PM 7/31/2003 -0400, you wrote:
> >Hi,
> >
> >I'm very new to running a jabber server, and i have been starting and
> >stopping the jabberd process with the setup.sh script which came with the
> >package.  As i'm testing my xml this is quite inconvenient, and i was
> >wondering if there is a way other than stopping and starting jabberd to
> >make it read the jabber.xml file.
> >
> >Thanks,
> >
> >Steve
> >
> >
> >_______________________________________________
> >jadmin mailing list
> >jadmin <at> jabber.org
> >http://mailman.jabber.org/listinfo/jadmin
>
> ~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
> Paul E. Virgo
> ES Unix Group
> ODIN CNE
> Goddard Space Flight Center/ACS-ODIN
> 301.286.0788 - direct
> 301.286.1670 - fax
> '~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
>
> _______________________________________________
> jadmin mailing list
> jadmin <at> jabber.org
> http://mailman.jabber.org/listinfo/jadmin
>
Moritz von Schweinitz | 1 Aug 14:54 2003
Picon

delivery retries

hi, all.

i'm very new to this jabber(d) thing, and ran into the following problem:
i have one central server, and a couple of 'sub-servers', which (due to 
infrastructual limitations) connect a couple of times per day via 
dial-up to the central server (pppd).

my plan was to have jabberd running on all servers, because i was 
assuming that ther server to server communication was bufferes to - i.e. 
that a server would hold a message until the recipient's server comes 
online, and then sends them to that server. the receipient's server 
should cache the messages until the user gets online.

but as i just found out, the s2s coms don't buffer - is there any way to 
still get this to work as i plan? someone in the jabber-chat suggested 
telling the server to e.g. retry delivery every 30secs, for 1000 times, 
returning an error message if after all those tries he couldn't pass on 
the message. this sounds as if it would work - but he was refereing to 
the javajabber server, which might some day support an option like 
this....can jabberd do this?

thanks for any hints,

M.
Moritz von Schweinitz | 1 Aug 15:02 2003
Picon

Re: jabberd1.4.2 LDap authentication

i was wondering:

wouldn't it be possible to simply make user.xml file a FIFO (via mknod), 
and generate the required xml on-the-fly using e.g. some database backend?

if not, then why not?

cheers,

M.

Denis Gueyffier wrote:

> You should have a look at the 
> xdb_ldap module :
> http://www.jabberstudio.org/cgi-bin/viewcvs.cgi/xdb_ldap/
> 
> best,
> 
> Denis Gueyffier
> 
> 
> -------Original Message-------
>  
> From: jadmin <at> jabber.org
> Date: Friday, August 01, 2003 11:54:16
> To: jadmin <at> jabber.org
> Subject: [jadmin] jabberd1.4.2 LDap authentication
>  
> Hi,
> I am running Jabberd-1.4.2 server and want to autheticate IM users
> through our openLDAP. Can anyone tell me how to autheticate users
> through openLDAP instead of authentication through the user.xml file
>  
> Thanx.
>  
> Regards-
> shrini
>  
> --
> Shrinivas Bolli
> Exaband (India) Private Limited,
> 24,Shantiniketan,
> East Marredpally,
> Secunderabad-26.
>  
> *********************************************************************************
>  
>  
> This email and any files transmitted along with it are confidential and
> intended
> solely for the use of the individual or entity to whom they are
> addressed.
>  
> Mail recipients and senders are bound by the
> EXABAND (INDIA) PRIVATE LIMITED Non-Disclosure Policy.
>  
> If you have not signed the Non-Disclosure Policy or if you feel you have
>  
> received this mail in error, please notify security <at> exaband.net
> *********************************************************************************
>  
>  
>  
>  
> _______________________________________________
> jadmin mailing list
> jadmin <at> jabber.org
> http://mailman.jabber.org/listinfo/jadmin
> .
> _______________________________________________
> jadmin mailing list
> jadmin <at> jabber.org
> http://mailman.jabber.org/listinfo/jadmin
> 
> 
Alex Mauer | 1 Aug 16:32 2003
Picon

Re: JUD Patch Application Query

Erick Carpenter wrote:
Greetings... On 7/31/03 2:27 PM, "Bryan Stevenson" <punkrawk <at> risenweb.com> wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Erick Carpenter wrote: | http://sgolovan.nes.ru/jabber/old.php | | specifically: | | jud-0.4.spaces.diff.gz You can apply jud-0.4-sg8.diff.gz instead which also fixes the white space issue as well as adding a number of other features.
Huh...very cool!
| However I'm a little at a loss on how to apply this patch. Can anyone help | me out and let me know how I should go about this? Just gunzip it in the src dir and use the patch command. `patch jud-0.4.spaces.diff`
I must be doing something wrong. When I type the command in with the filename it just sort of hangs there doing nothing. I let it sit for awhile before I stopped it. Is there anyway to view output and perhaps get an idea as to where it may be having issues?
It needs to be 'patch < jud-0.4.spaces.diff'  or (from the original gzip) 'gunzip -cd jud-0.4-sg8.diff.gz | patch'
David McKellar | 1 Aug 16:44 2003
Picon

MemberBot

Hi, I read about MemberBot ("A bot that handles voting and other tasks to service members of a
community")
http://www.jabberstudio.org/projects/memberbot/project/view.php
I want to download it and give it a try but I can't see where to do that.
Does anyone know?

In searching I found a paper by Peter Saint-Andre saying why MemberBot "must die"
http://www.jabber.org/tmp/votereq.html
But I still want to give it a go.

Thanks.

=====
Please ignore the following ad...

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

Gmane