New and need assistance

I have just installed Razor2 for the first time, and I have been following
the instructions posted at this url:
http://razor.sourceforge.net/docs/install.php, but I ran into some problems.

when I went to register, I had typed the email address in wrong and I am
wanting to change it to another address.  How do I go about removing the
address I put in and replacing it with a new address?

Initially I nagivated to the directory the file was created and deleted it,
but I can now see that may have been the wrong thing to do.  Please help me
work myself out of this hole

Casey

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

Razor related problems

I have two problems with Razor at the moment.

1.) I can't retrieve the download for 2.75, I get the
following error:
Could not read file.

Go back.
/home/ftp/pub/sourceforge//r/ra/razor/razor-agents-2.75.tar.gz

Aug 11, 2005 14:00

2.) Messages arriving here from * <at> telus.net users with a
word document attached are listed in Razor.

I'm using SpamAssassin to handle tagging, here is a paste of
the results of one of these messages.
---Paste---
X-Spam-Status: Yes, hits=9.95 tagged_above=-999 required=5
tests=[AWL=-3.613,
 BAYES_50=2.3, DIGEST_MULTIPLE=0.098,
DNS_FROM_RFC_POST=1.614,
 HTML_90_100=0.022, HTML_MESSAGE=0.001,
MIME_HTML_MOSTLY=1.023,
 PYZOR_CHECK=3.451, RAZOR2_CF_RANGE_51_100=0.056,
RAZOR2_CHECK=5,
 SPF_HELO_PASS=-0.001, SPF_PASS=-0.001]
---End Paste---

And yet the same account sending without a word document
scores like this:

RE: Razor related problems

Can you give me razor-check -H output for the word document mail?
Richard, could you look into the download issue? 

-----Original Message-----
From: razor-users-admin <at> lists.sourceforge.net
[mailto:razor-users-admin <at> lists.sourceforge.net] On Behalf Of Kevin W.
Gagel
Sent: Thursday, August 11, 2005 2:12 PM
To: Razor List
Subject: [Razor-users] Razor related problems
Importance: High

I have two problems with Razor at the moment.

1.) I can't retrieve the download for 2.75, I get the following error:
Could not read file.

Go back.
/home/ftp/pub/sourceforge//r/ra/razor/razor-agents-2.75.tar.gz

Aug 11, 2005 14:00

2.) Messages arriving here from * <at> telus.net users with a word document
attached are listed in Razor.

I'm using SpamAssassin to handle tagging, here is a paste of the results
of one of these messages.
---Paste---
X-Spam-Status: Yes, hits=9.95 tagged_above=-999 required=5
tests=[AWL=-3.613,  BAYES_50=2.3, DIGEST_MULTIPLE=0.098,

Re: New and need assistance

Casey wrote:

> I have just installed Razor2 for the first time, and I have been following
> the instructions posted at this url:
> http://razor.sourceforge.net/docs/install.php, but I ran into some problems.

> when I went to register, I had typed the email address in wrong and I am
> wanting to change it to another address.  How do I go about removing the
> address I put in and replacing it with a new address?

> Initially I nagivated to the directory the file was created and deleted it,
> but I can now see that may have been the wrong thing to do.  Please help me
> work myself out of this hole

> Casey

As always, use at your own risk, but logged in as the user you
trying to configure, I would simply:

cd
mv .razor .razor-old
razor-admin -create
razor-admin -register

If razor-admin fails on the first try, run it once again.

If you are using SpamAssassin, you can test with:

spamassassin --lint -D

RE: New and need assistance

thanks for the instructions...worked like a charm

-----Original Message-----
From: Gary V [mailto:lists <at> johnmecham.com]
Sent: Friday, August 12, 2005 8:51 AM
To: Casey King
Cc: Razor Users (E-mail)
Subject: Re: [Razor-users] New and need assistance

Casey wrote:

> I have just installed Razor2 for the first time, and I have been following
> the instructions posted at this url:
> http://razor.sourceforge.net/docs/install.php, but I ran into some
problems.

> when I went to register, I had typed the email address in wrong and I am
> wanting to change it to another address.  How do I go about removing the
> address I put in and replacing it with a new address?

> Initially I nagivated to the directory the file was created and deleted
it,
> but I can now see that may have been the wrong thing to do.  Please help
me
> work myself out of this hole

> Casey

As always, use at your own risk, but logged in as the user you
trying to configure, I would simply:

install razor

Re: install razor

Ron Eggler wrote:
> Hi,
>  
> I'd like to install razor as support for spamassassin but I only get
> this:
> reg <at> linux <mailto:reg <at> linux>:~> su
> Password:
> linux:/home/reg #
> '/home/reg/Desktop/downloads/razor-agents-2.75/razor-agents-2.75/Makefile.PL'
> bash:
> /home/reg/Desktop/downloads/razor-agents-2.75/razor-agents-2.75/Makefile.PL:
> Keine Berechtigung

1) you MUST cd into the razor-agents directory before trying to build razor.

This is causing most of your problems, as the Makefile.PL script can't find the
other tarball files in your current directory.

2) usually you don't execute Makefile.PL directly, you pass it as a parameter to
perl.

Try this sequence after you su:

cd /home/reg/Desktop/downloads/razor-agents-2.75/razor-agents-2.75/
perl Makefile.PL
make
make install

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

Re: install razor

perl Makefile.PL
make
make install

On Wed, 17 Aug 2005, Ron Eggler wrote:

> Hi,
>
> I'd like to install razor as support for spamassassin but I only get
> this:
> reg <at> linux:~> su
> Password:
> linux:/home/reg #
> '/home/reg/Desktop/downloads/razor-agents-2.75/razor-agents-2.75/Makefile.PL
> '
> bash:
> /home/reg/Desktop/downloads/razor-agents-2.75/razor-agents-2.75/Makefile.PL:
> Keine Berechtigung
> linux:/home/reg # chmod 777
> '/home/reg/Desktop/downloads/razor-agents-2.75/razor-agents-2.75/Makefile.PL
> '
> linux:/home/reg #
> '/home/reg/Desktop/downloads/razor-agents-2.75/razor-agents-2.75/Makefile.PL
> '
> Could not open 'lib/Razor2/Client/Version.pm': Datei oder Verzeichnis
> nicht gefunden at /usr/lib/perl5/5.8.6/ExtUtils/MM_Unix.pm line 3079.
> # Looks like your test died before it could output anything.
> linux:/home/reg #
>
> How to get it installed?
>
> Thank you!
>
> chEErs roN
>  <http://www.t-board.ch/vbb/images/smilies/rock.gif>
> ::::::::::::::::::::::::::::
> Ron Eggler
> Alte Römerstr.34
> CH-8404 Winterhur
> Switzerland
> <mailto:ron <at> rideon.ch> ron <at> rideon.ch
> <http://www.rideon.ch/> www.rideon.ch
>
>

--
Mike Burger
http://www.bubbanfriends.org

Visit the Dog Pound II BBS
telnet://dogpound2.citadel.org or http://dogpound2.citadel.org

To be notified of updates to the web site, visit 
http://www.bubbanfriends.org/mailman/listinfo/site-update, or send a 
message to:

site-update-request <at> bubbanfriends.org

with a message of:

subscribe

razor2 report failed

Hi,
i'm new to razor and setted up together with
amavis/clamav/spamassassin and maia.
So when processing my mails i've this error:
razor2 report failed: No such file or directory Razor2 report
requires authentication at
/usr/share/perl5/Mail/SpamAssassin/Reporter.pm line 148.
Learned mail item 9837 as SPAM and reported it

What about that authentication exactly ?

Thanks in advance for the help.

mess-mate                               
--
Your mode of life will be changed for the better because of good news soon.

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

RE: razor2 report failed

You need to create a razor identity using "razor-report -register". The
new version of the agents (2.77), which was released a few days ago,
will automatically create an identity.  It also fixes some bugs with
amavis integration, so I suggest that you upgrade.  

-----Original Message-----
From: razor-users-admin <at> lists.sourceforge.net
[mailto:razor-users-admin <at> lists.sourceforge.net] On Behalf Of mess-mate
Sent: Friday, August 19, 2005 10:58 AM
To: razor-users <at> lists.sourceforge.net
Subject: [Razor-users] razor2 report failed

Hi,
i'm new to razor and setted up together with amavis/clamav/spamassassin
and maia.
So when processing my mails i've this error:
razor2 report failed: No such file or directory Razor2 report requires
authentication at /usr/share/perl5/Mail/SpamAssassin/Reporter.pm line
148.
Learned mail item 9837 as SPAM and reported it

What about that authentication exactly ?

Thanks in advance for the help.

mess-mate                               
--
Your mode of life will be changed for the better because of good news
soon.

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle
Practices Agile & Plan-Driven Development * Managing Projects & Teams *
Testing & QA Security * Process Improvement & Measurement *
http://www.sqe.com/bsce5sf
_______________________________________________
Razor-users mailing list
Razor-users <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/razor-users

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf