birulevo.net | 1 Apr 12:25 2007
Picon

ECL-error

Hello, ecl- users and developers!

 Please answer on my question.
 I am try make ecl on freebsd6.2 (after ./configure
 --prefix=/home/_my_):

----------------------------------------------------
$ make
cd build; make
if (echo c gc gmp | grep gmp); then  cd gmp && make install &&  cd .. && mv h/gmp.h ecl/ && rmdir h &&   mv ./libgmp.a
./libeclgmp.a;  fi
c gc gmp
make: don't know how to make install. Stop
*** Error code 2

Stop in /home/proprint/forcpl/ecl-0.9i/build.
*** Error code 1

Stop in /home/proprint/forcpl/ecl-0.9i.
------------------------------------------------------------------------

What you do??
 How success building ecl?? Please answer - very need!

 -----------------
 P.S. Excuse for bad English.
--

-- 
Respect!,
 birulevo.net                          mailto:linkfly@...

(Continue reading)

Juan Jose Garcia-Ripoll | 1 Apr 15:30 2007
Picon
Picon

Re: ECL-error

2007/4/1, birulevo.net <linkfly@...>:
> if (echo c gc gmp | grep gmp); then  cd gmp && make install &&  cd .. && mv h/gmp.h ecl/ && rmdir h &&   mv ./libgmp.a
./libeclgmp.a;  fi
> c gc gmp
> make: don't know how to make install. Stop
> *** Error code 2

This tells me that the configuration process of GMP failed. There are
many reasons why it could go wrong. I need a little bit more
information:

* WHat BSD? What machine? (Intel, AMD, PPC?)
* Do you have GMP installed?
* What version of ECL? Is it 0.9i or CVS?

After answering these questions you have two alternatives here:

1) Install gmp from FreeBSD ports, remove the directory "build" and
configure + make again

2) Configure again ECL and collect the output of "configure" and the
files build/config.log, build/gmp/config.log and
build/gmp/config.status and send them to my private email address. I
might be able to find the cause.

--

-- 
Facultad de Fisicas, Universidad Complutense,
Ciudad Universitaria s/n Madrid 28040 (Spain)
http://juanjose.garciaripoll.googlepages.com

(Continue reading)

David_Creelman | 3 Apr 01:44 2007
Picon

clx, stream-read-sequence

Hi,

CLX is working relatively well for me in ECL as long as I don't run some
of the more complicated demos.
If I run ecl and do
(require 'clx)
(load "clx-demos.lisp")
(demos::do-all-demos)

I get the following

> (require 'clx)
;;; Loading #P"/usr/local/lib/ecl/clx.fas"
(NIL)
> (load "clx-demos.lisp")
;;; Loading "/home/davidc/download/ecl/ecl/src/clx/demo/clx-demos.lisp"
"/home/davidc/download/ecl/ecl/src/clx/demo/clx-demos.lisp"
> (demos::do-all-demos)
No applicable method for SI:STREAM-READ-SEQUENCE
Broken at EVAL.No restarts available.
Broken at XLIB:OPEN-DISPLAY.

However, if I run the clclock demo, I get a clock window as expected,
after doing xhost +.

I've looked through the source for ECL and CLX and I notice that
stream-read-sequence is defined in ext, not si in ECL and that
stream-read-sequence isn't directly called in CLX, so it must be called by
stream-something-I-dont-know-of. I think this is part of the gray streams
implementation.
(Continue reading)

Julian Stecklina | 4 Apr 17:29 2007
Picon

New Release?

Hello,

I am currently in the process of setting up a PA-RISC box using Gentoo 
Linux. At the moment ECL is my only option for a CL environment, as all 
the others do not build on this machine.

My goal is to update the Ebuilds in Gentoo Portage to support the HP PA 
platform, so that ECL can be build like every other software, using 
emerge ecls, on this machine. The problem is that the 0.9i ebuild is 
masked and 0.9h is quite old.

  1) The most recent ECL release 0.9i is hard masked because of linking 
issues. Can anybody comment on that?

  2) Juanjo, is it possible to do a new release in the near future or 
what are your plans about that?

Btw, on the ECL homepage the LATEST RELEASE link points to 0.9h's 
release notes. This should be 0.9i or removed alltogether, as one can 
see what's the latest release via the download link.

Regards,
Julian

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
(Continue reading)

Tristan Ravitch | 4 Apr 18:37 2007
Picon

Re: New Release?

>   1) The most recent ECL release 0.9i is hard masked because of linking 
> issues. Can anybody comment on that?

I looked into the ecl 0.9i linking problem on Gentoo and posted my
findings in this bug:
http://bugs.gentoo.org/show_bug.cgi?id=156182

Summary: it is a gentoo issue and 0.9i works well.
I think that the Gentoo common-lisp herd is woefully understaffed.

--

-- 
Tristan Ravitch
travitc@...
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Ecls-list mailing list
Ecls-list@...
https://lists.sourceforge.net/lists/listinfo/ecls-list
Dustin Long | 5 Apr 03:12 2007

Kamen Lisp - ECL embedded in Firefox

Hi All,
I wanted to announce a project I've been hacking on for a while. It's a 
Firefox extension that allows Common Lisp to be used
instead of Javascript to script webpages. Naturally, it uses ECL as the 
lisp environment.

You can check it out here:
http://www.cs.stevens.edu/~dlong/software/kamen/index.php

This is still a very early version, it's still a bit unstable (very 
unstable on Linux), and limited in functionality. Basically there's 
enough in place to make this demo page work, which calculates fibonachi 
numbers and uses some DHTML to display the result:
http://www.cs.stevens.edu/~dlong/software/kamen/fib.html

For the next version I hope to fix many of the current issues (random 
crashes, dom limitations, single global environment) but figured you'd 
be interested in hearing about where it's at so far.

Dustin

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
birulevo.net | 5 Apr 11:45 2007
Picon

error ecl on linking: multiple definition of `init_MYPROG'

Hello all!
Try building program how write in manual and get this error:(
Help me please..

Full text error:

;;; Note: Invoking external command:
;;; gcc -o "/home/proprint/forcpl/ecl/bin/test/check-user"
-L"/home/proprint/forcpl/ecl/lib/ecl/"
"/home/proprint/forcpl/ecl/bin/test/ECLINITgoZX87.o"
"/home/proprint/forcpl/ecl/bin/test/check-user.o" 
-Wl,--rpath,/home/proprint/forcpl/ecl/lib/ecl/   -lecl   -lm

/home/proprint/forcpl/ecl/bin/test/check-user.o(.text+0x234): In function `init_CHECK_USER':
/home/proprint/forcpl/ecl/bin/test/check-user.c:83: multiple definition of
`init_CHECK_USER'
/home/proprint/forcpl/ecl/bin/test/ECLINITgoZX87.o(.text+0x0):/home/proprint/forcpl/ecl/bin/test/ECLINITgoZX87.c:22:
first defined here
/usr/bin/ld: Warning: size of symbol `init_CHECK_USER' changed from 99 in
/home/proprint/forcpl/ecl/bin/test/ECLINITgoZX87.o to 157 in /home/proprint/forcpl/ecl/bin/test/check-user.o
An error occurred during initialization:
(SYSTEM "gcc -o \"/home/proprint/forcpl/ecl/bin/test/check-user\"
-L\"/home/proprint/forcpl/ecl/lib/ecl/\"
\"/home/proprint/forcpl/ecl/bin/test/ECLINITgoZX87.o\"
\"/home/proprint/forcpl/ecl/bin/test/check-user.o\" 
-Wl,--rpath,/home/proprint/forcpl/ecl/lib/ecl/   -lecl   -lm  ") returned non-zero value 1.

P.S. Excuse for bad English
--

-- 
 With respect, LinkFly                        mailto:linkfly@...
(Continue reading)

Tomi Neste | 5 Apr 14:19 2007
Picon

MSVC build problem

Hi, when trying to compile the latest from CVS ECL with MSVC I get the  
following error:

Microsoft (R) Program Maintenance Utility Version 8.00.50727.42
Copyright (C) Microsoft Corporation.  All rights reserved.

makefile(7) : fatal error U1052: file 'ntwin32.mak' not found
Stop.
NMAKE : fatal error U1077: '"C:\Program Files\Microsoft Visual Studio  
8\VC\BIN\nmake.exe"' : return code '0x2'
Stop.

Since there doesn't seem to be any ntwin32.mak in the source tree I just  
commented the approriate line out from gc/Makefile but after that I get  
complains about '-MD not being recognised as a command'.
Any clues?

--
Tomi Neste

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
Goffioul Michael | 5 Apr 15:00 2007
Picon

Re: [spam?] MSVC build problem

> Hi, when trying to compile the latest from CVS ECL with MSVC 
> I get the following error:
> 
> Microsoft (R) Program Maintenance Utility Version 
> 8.00.50727.42 Copyright (C) Microsoft Corporation.  All 
> rights reserved.
> 
> makefile(7) : fatal error U1052: file 'ntwin32.mak' not found Stop.
> NMAKE : fatal error U1077: '"C:\Program Files\Microsoft 
> Visual Studio 8\VC\BIN\nmake.exe"' : return code '0x2'
> Stop.
> 
> Since there doesn't seem to be any ntwin32.mak in the source 
> tree I just commented the approriate line out from 
> gc/Makefile but after that I get complains about '-MD not 
> being recognised as a command'.
> Any clues?

ntwin32.mak is part of the Platform SDK and is located in the
include directory. This include directory should then be part
of your INCLUDE environment variable.

Michael.

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
(Continue reading)

Pierre THIERRY | 5 Apr 15:52 2007

Re: Kamen Lisp - ECL embedded in Firefox

Scribit Dustin Long dies 04/04/2007 hora 21:12:
> I wanted to announce a project I've been hacking on for a while. It's
> a Firefox extension that allows Common Lisp to be used instead of
> Javascript to script webpages. Naturally, it uses ECL as the lisp
> environment.

I've been waiting for it!

> http://www.cs.stevens.edu/~dlong/software/kamen/fib.html

One remark and some questions:

- the page is not a valid HTML document, the Lisp code should either be
  escaped or protected in CDATA sections
- why is the value of onClick "run();" and not "(run)"? does that mean
  that your code make it possible to call CL from JS?

BTW, will you release this code under a free licence?

Curiously,
Pierre
--

-- 
nowhere.man@...
OpenPGP 0xD9D50D8A
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
(Continue reading)


Gmane