headers
Anwar | 1 Jul 2005 04:54

Re: Monitor Blank

Hi All,

Sorry if this question i send back, the problem in my case, only appear
on monitor with 15 inch, monitor with 17 inch and LCD monitor can work
properly, there is anybody can help me why only monitor with 15 Inch
can't work?
Sorry if this question already send to this milist.

Rgd's

Anwar wrote:

>Hello All.
>
>I had alredy Install LTSP on Kubuntu and it work.
>The problem is on workstation that used LG monitor Studiowork 505G with
>Nvidia Video Card, after boot it cant load X just blank and showing
>spec. frequency  of monitor. It didn't happen on workstation with spec
>Intel 845SVG (m/b) with Monitor Samsung SynMaster 753s (17").
>I already try to configure manually lts.conf with example on ltsp
>documentation, but sill cant work.
>The configuration that I already used is :
>X_MODE_0, X_CLOR_DEPTH, X_HORZSYNC, X_VERTREFRESH, X_VIDEORAM.
>Server use Kubuntu with ltsp ver 4.1 and use kernel 2.6.
>Any clue?
>
>Rgd's
>  
>
(Continue reading)

Permalink | Reply | 2 comments |
headers
David Johnston | 1 Jul 2005 05:36

Re: IBM Client Access 5250 Emulator

On Thu, 2005-06-30 at 10:12, Patrick Prue wrote:
> Has anyone gotten this working in the LTSP environment?
> 
> We are currently running LTSP on an LPAR on an AS400 running under
> Redhat Enterprise 3 . This project got bumped off for a lil bit with
> regards to the emulator but now i am back to it.
> 
> When attempting to start it under a terminal session we get the
> following error messages..
> 
> 5250: [ DEBUG ]: RegistryInfo::WhichKeyboard(): Could not open file
> /etc/X11/XF86Config or /etc/X11/xorg.conf.
> 5250: [ ERROR ]: NSC0017: Xt Warning: Missing charsets in String to
> FontSet conversion.
> 5250: [ ERROR ]: NSC0017: Xt Warning: Cannot convert string
> "-*-lucidatypewriter-medium-r-normal-*-20-*-*-*-m-*" to type FontSet.
> 
> 
> Any ideas? As it does work perfectly from an X session running off the
> server via VNC but not from a terminal .

My first guess would be that you aren't using an X font server, and that
the 5250 emulator can't find a font it needs (perhaps the
lucidatypewriter font).

Try enabling the XFS on the server (comment out "nolisten tcp" in
/etc/X11/fs/config, restart xfs, and then set USE_XFS in lts.conf).
--

-- 
David Johnston <david@...>
(Continue reading)

Permalink | Reply | 0 comments |
headers
Mohsen Pahlevanzadeh | 1 Jul 2005 07:48
Gravatar

unsibscribe & page of LTSP

Dears,
When i visit following link :
mailto:ltsp-discuss@...
I can't find unsibscribe option.
Please help me....
Yours,Mohsen

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net
Permalink | Reply | 1 comment |
headers
Mohsen Pahlevanzadeh | 1 Jul 2005 07:52
Gravatar

My previous email has error,Please read it

Dears,
When i visit following link :
http://lists.sourceforge.net/lists/listinfo/ltsp-discuss
i can't find unsibscribe option.
Please help me ....
Yours,Mohsen

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net
Permalink | Reply | 0 comments |
headers
Teh Yong Wei | 1 Jul 2005 11:10
Picon

buildk

Hi,

I am re-create the initrd and vmlinuz for kernel 2.6 using the ltsp_initrd_kit 
tool. I managed to create the new initrd but during the boot time, I received 
the following msg:

modprobe e100
modprobe: QM_MODULES: %m

modprobe: QM_MODULES: %m
modprobe: Can't locate module e100

the module e100 is in the initrd ramdisk. What does the above error msg mean?

Thank you.

cheers,
Yong Wei

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net
(Continue reading)

Permalink | Reply | 2 comments |
headers
Pål Arne Hoff | 1 Jul 2005 12:02
Picon

Re: Monitor Blank

It sounds like your 15" monitor doesn't support the resolution and or
refresh rate you're trying to display. Try setting "X_MODE_0 = 800x600"
in your lts.conf-file for that client and see if that works.

Regards,
Pål Arne Hoff

Anwar wrote:
> Hi All,
> 
> Sorry if this question i send back, the problem in my case, only appear
> on monitor with 15 inch, monitor with 17 inch and LCD monitor can work
> properly, there is anybody can help me why only monitor with 15 Inch
> can't work?
> Sorry if this question already send to this milist.
> 
> Rgd's
> 
> Anwar wrote:
> 
> 
>>Hello All.
>>
>>I had alredy Install LTSP on Kubuntu and it work.
>>The problem is on workstation that used LG monitor Studiowork 505G with
>>Nvidia Video Card, after boot it cant load X just blank and showing
>>spec. frequency  of monitor. It didn't happen on workstation with spec
>>Intel 845SVG (m/b) with Monitor Samsung SynMaster 753s (17").
>>I already try to configure manually lts.conf with example on ltsp
>>documentation, but sill cant work.
(Continue reading)

Permalink | Reply | 1 comment |
headers
Jim McQuillan | 1 Jul 2005 15:23

Re: unsibscribe & page of LTSP

Mohsen,

Try:

   https://lists.sourceforge.net/lists/listinfo/ltsp-discuss

Jim McQuillan
jam@...

On Thu, 30 Jun 2005, Mohsen Pahlevanzadeh wrote:

> Dears,
> When i visit following link :
> mailto:ltsp-discuss@...
> I can't find unsibscribe option.
> Please help me....
> Yours,Mohsen
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> from IBM. Find simple to follow Roadmaps, straightforward articles,
> informative Webcasts and more! Get everything you need to get up to
> speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> _____________________________________________________________________
> Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
>       https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help,   try #ltsp channel on irc.freenode.net
>
(Continue reading)

Permalink | Reply | 0 comments |
headers
Jim McQuillan | 1 Jul 2005 15:30

Re: buildk

Teh,

the buildk and initrd_kit are for LTSP-3 and a 2.4 kernel.

There's lots of changes that need to be made to support a 2.6 kernel,
including an updated set of modutils.

Kernels for LTSP are now built with the LBE.

Jim McQuillan
jam@...

On Fri, 1 Jul 2005, Teh Yong Wei wrote:

> Hi,
>
> I am re-create the initrd and vmlinuz for kernel 2.6 using the ltsp_initrd_kit
> tool. I managed to create the new initrd but during the boot time, I received
> the following msg:
>
> modprobe e100
> modprobe: QM_MODULES: %m
>
>
> modprobe: QM_MODULES: %m
> modprobe: Can't locate module e100
>
> the module e100 is in the initrd ramdisk. What does the above error msg mean?
>
> Thank you.
(Continue reading)

Permalink | Reply | 0 comments |
headers
Richard Shade | 1 Jul 2005 15:42

GX280 NIC Detection

I am trying to use LTSP on a gx280 and the NIC is not being
autodetected. It is a broadcom nic. I built in all of the broadcom
drivers into the kernel that were available and still no go any ideas?  

Richard Shade

Project Lead - CTI Systems

Effective Teleservices, Inc.

1903  Berry Dr. 

Nacogdoches, TX 75965

(w)  936-559-2280

(c)  936-371-1817

 "Playing by the Rules"

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net
(Continue reading)

Permalink | Reply | 2 comments |
headers
Jake Stride | 1 Jul 2005 15:46
Picon

Re: GX280 NIC Detection

If it has the broadcom gigabit cards try adding NIC=tg3 to the end of
the config file in /tftpboot/lts/2.6.9-ltsp-3/pxelinux.cfg/ (and
obviously tell your dhcp server to boot the 2.6 kernel). I used a stock
kernel for the SX280s and it worked ok.

Thanks

Jake

Richard Shade wrote:
>I am trying to use LTSP on a gx280 and the NIC is not being
>autodetected. It is a broadcom nic. I built in all of the broadcom
>drivers into the kernel that were available and still no go any ideas?  
> 
>
>Richard Shade
>
>Project Lead - CTI Systems
>
>Effective Teleservices, Inc.
>
>1903  Berry Dr. 
>
>Nacogdoches, TX 75965
>
>(w)  936-559-2280
>
>(c)  936-371-1817
>
> "Playing by the Rules"
(Continue reading)

Permalink | Reply | 1 comment |

Gmane