tonisl | 1 Jul 13:40 2014
Picon

unable to run mondoarchive Ubuntu 10.04. amd

I'm unable to run start Mondo something with fstab thanks to RAID controller or something. here's mondorestore log file

Time started: Tue Jul 1 14:21:10 2014 running: dmesg -n1 > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Mondo Archive v3.0.4-r3177 --- http://www.mondorescue.org running x86_64 binaries running on x86_64 architecture ----------------------------------------------------------- NB: Mondo logs almost everything, so don't panic if you see some error messages. Please read them carefully before you decide to break out in a cold sweat. Despite (or perhaps because of) the wealth of messages. some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! -Devteam ----------------------------------------------------------- Zero... [Main] mondoarchive.c->welcome_to_mondoarchive#104: One... [Main] mondoarchive.c->welcome_to_mondoarchive#105: Two... [Main] mondoarchive.c->welcome_to_mondoarchive#106: Three... [Main] mondoarchive.c->welcome_to_mondoarchive#107: Four... [Main] mondoarchive.c->distro_specific_kludges_at_start_of_mondoarchive#124: Unmounting old ramdisks if necessary running: mount | grep cdrom | grep super > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: mount | grep floppy | grep super > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-tools.c->mount_boot_if_necessary#1249: Started sub [Main] libmondo-tools.c->mount_boot_if_necessary#1250: About to set g_boot_mountpt[0] to '\0' [Main] libmondo-tools.c->mount_boot_if_necessary#1252: Done. Great. Seeting command to something [Main] libmondo-tools.c->mount_boot_if_necessary#1255: Cool. Command = 'grep -v ":" /etc/fstab | grep -vE '^#.*$' | grep -E "[ ]/boot[ ]" | tr -s ' ' ' ' | cut -f1 | head -n1' [Main] libmondo-tools.c->mount_boot_if_necessary#1259: tmp = 'UUID=a17bd9b1-e615-40ef-908a-d3c032b1eb27' [Main] libmondo-tools.c->mount_boot_if_necessary#1261: /boot is at UUID=a17bd9b1-e615-40ef-908a-d3c032b1eb27 according to /etc/fstab [Main] libmondo-tools.c->mount_boot_if_necessary#1305: Ended sub [Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 2.632000 running: rm -Rf /var/cache/mondo/changed.files* > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Checking sanity of your Linux distribution running: grep ramdisk /proc/devices > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- 1 ramdisk --------------------------------end of output------------------------------ ...ran just fine. :-) running: mount | grep -Ew 'vfat|fat|dos' | grep -vE "/dev/fd|nexdisk" > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mond o.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found cmp at /usr/bin/cmp running: mindi -V > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Mindi v2.0.4-r2045 ERROR: modinfo: could not find module libata --------------------------------end of output------------------------------ ...ran just fine. :-) ------------- mindi logfile included ------------------------- mindi v2.0.4-r2045 x86_64 architecture detected mindi called with the following arguments: --makemountlist /tmp/mondo.tmp.IAnuaa/mountlist.txt.test Start date : Tue Jul 1 14:21:10 EEST 2014 ----------------------------- MONDO_SHARE = /usr/share/mondo MINDI_LIB = /usr/lib/mindi MINDI_SBIN = /usr/sbin MINDI_CONF = /etc/mindi Found isolinux.bin at /usr/lib/syslinux/isolinux.bin LVM set to v2 ---------- mount result: ------------- /dev/md0p1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) none on /var/lib/ureadahead/debugfs type debugfs (rw,relatime) /dev/md0p6 on /boot type ext2 (rw) //192.168.3.232/StockMasterPrint on /samba type cifs (rw,mand) //192.168.3.250/NetBackup/StockMaster on /backup type cifs (rw,mand) //192.168.3.250/NetBackup/StockMaster on /backup type cifs (rw,mand) /dev/loop0 on /tmp/mindi.UBlWdbpQI8/mnt1 type ext2 (rw) ------------- ------------- /etc/raidtab content: ------------- # Generated by Mondo Rescue raiddev /dev/md0 raid-level 1 nr-raid-disks 2 persistent-superblock 1 device /dev/sdb1 raid-disk 1 device /dev/sda1 raid-disk 0 ------------- cat /proc/cmdline: ------------- BOOT_IMAGE=/vmlinuz-2.6.32-25-server root=UUID=bd871fdd-16a1-4e06-a5df-329ba4f47829 ro quiet ------------- cat /proc/swaps: ------------- Filename Type Size Used Priority /dev/md0p5 partition 8388600 16164 -1 ------------- cat /proc/partitions: ------------- major minor #blocks name 7 0 49152 loop0 8 0 312571224 sda 8 1 312568641 sda1 8 16 312571224 sdb 8 17 312568641 sdb1 9 0 312568576 md0 259 0 293601280 md0p1 259 1 1 md0p2 259 2 8388608 md0p5 259 3 96256 md0p6 ------------- cat /proc/filesystems: ------------- nodev sysfs nodev rootfs nodev bdev nodev proc nodev cgroup nodev cpuset nodev tmpfs nodev devtmpfs nodev debugfs nodev securityfs nodev sockfs nodev pipefs nodev anon_inodefs nodev inotifyfs nodev devpts ext3 ext2 ext4 nodev ramfs nodev hugetlbfs nodev ecryptfs nodev fuse fuseblk nodev fusectl nodev mqueue nodev cifs msdos vfat ------------- lsmod result: ------------- Module Size Used by nls_iso8859_1 4633 0 vfat 10866 0 msdos 7936 0 fat 55062 2 vfat,msdos nls_cp437 6351 3 cifs 279110 5 fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon bitblit 5811 1 fbcon softcursor 1565 1 bitblit snd_hda_codec_atihdmi 3023 1 vga16fb 12757 1 vgastate 9857 1 vga16fb snd_hda_codec_realtek 279040 0 snd_hda_intel 25773 0 snd_hda_codec 85663 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel radeon 740922 0 ppdev 6375 0 ttm 60815 1 radeon snd_hwdep 6778 1 snd_hda_codec parport_pc 29958 1 lp 9336 0 snd_pcm 87312 2 snd_hda_intel,snd_hda_codec parport 37160 3 ppdev,parport_pc,lp drm_kms_helper 30742 1 radeon snd_timer 23617 1 snd_pcm snd 70978 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer drm 198532 3 radeon,ttm,drm_kms_helper soundcore 8052 1 snd i2c_algo_bit 6024 1 radeon intel_agp 29063 0 serio_raw 4950 0 xhci 41830 0 snd_page_alloc 8500 2 snd_hda_intel,snd_pcm raid10 21450 0 raid456 54784 0 async_pq 3891 1 raid456 async_xor 3111 2 raid456,async_pq xor 4685 1 async_xor async_memcpy 1537 1 raid456 async_raid6_recov 1816 1 raid456 usbhid 41084 0 raid6_pq 80147 2 async_pq,async_raid6_recov async_tx 2545 5 raid456,async_pq,async_xor,async_memcpy,async_raid6_recov hid 83440 1 usbhid r8169 39650 0 mii 5237 1 r8169 pata_jmicron 2747 0 ahci 37870 0 raid1 22514 1 raid0 6778 0 multipath 7181 0 linear 4158 0 FORCE_MODS: ------------- ------------- DENY_MODS: ------------- kqemu ------------- df result: ---------- Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/md0p1 ext4 288994624 57206560 217108000 21% / none devtmpfs 2019960 264 2019696 1% /dev none tmpfs 2024512 0 2024512 0% /dev/shm none tmpfs 2024512 3076 2021436 1% /var/run none tmpfs 2024512 0 2024512 0% /var/lock none tmpfs 2024512 0 2024512 0% /lib/init/rw none debugfs 288994624 57206560 217108000 21% /var/lib/ureadahead/debugfs /dev/md0p6 ext2 90195 31827 53556 38% /boot //192.168.3.232/StockMasterPrint cifs 61440560 10647300 50793260 18% /samba //192.168.3.250/NetBackup/StockMaster cifs 2870346112 1757785276 1112458436 62% /backup //192.168.3.250/NetBackup/StockMaster cifs 2870346112 1757785276 1112458436 62% /backup /dev/loop0 ext2 46059 766 44802 2% /tmp/mindi.UBlWdbpQI8/mnt1 ------------- Liste of extra modules is: ht st osst ide-tape ide_tape ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd _mod ide-cs ide-core ide_core edd paride ata_generic ata_piix libata dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pat a_marvell pata_serverworks pata_sis amd74xx sis5513 usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd u hci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod pcmcia_core ds yenta_socket 3w-xxxx 3w_xxxx 3w_ 9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic 7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_cor e ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx q la2xxx_conf qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule sunrpc nfs nfs_acl lockd fscache l oop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet exportfs af_packet c drom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat loop md-mod linear ra id0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs n fs_acl nfsd lockd sunrpc jbd mbcache ------------- Your raw fstab file looks like this: ------------------------------------ # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/md0p1 during installation UUID=bd871fdd-16a1-4e06-a5df-329ba4f47829 / ext4 errors=remount-ro 0 1 # /boot was on /dev/md0p6 during installation UUID=a17bd9b1-e615-40ef-908a-d3c032b1eb27 /boot ext2 defaults 0 2 /dev/md0p5 none swap sw 0 0 /dev/scd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 //192.168.3.232/StockMasterPrint /samba cifs rw,username=Operaator1,password=Operaator.1,uid=1002,gid=1002 0 0 #//192.168.3.30/StockMaster /backup cifs rw,domain=SAAR,username=varukopi,password=123456,uid=1000,gid=1000 0 0 //192.168.3.250/NetBackup/StockMaster /backup cifs rw,username=varukopi,password=123456,uid=1000,gid=1000 0 0 Your mountlist will look like this: ----------------------------------- DEVICE MOUNTPOINT FORMAT SIZE (MB) LABEL/UUID Unable to open proc Examining /dev/md0p6 (mount=/boot fmt=ext2 psz=-1) /dev/md0p6 /boot ext2 0 a17bd9b1-e615-40ef-908a-d3c032b1eb27 Examining /dev/md0p5 (mount=swap fmt=swap psz=8388600) /dev/md0p5 swap swap 8191 Unable to open //192.168.3.232/StockMasterPrint Examining //192.168.3.232/StockMasterPrint (mount=/samba fmt=cifs psz=61440560) //192.168.3.232/StockMasterPrint /samba cifs 60000 Unable to open //192.168.3.250/NetBackup/StockMaster Examining //192.168.3.250/NetBackup/StockMaster (mount=/backup fmt=cifs psz=2870346112 2870346112) You are using Mindi-Linux v2.0.4-r2045 to make boot+data disks Mindi-BusyBox v1.7.3-r2622 (2010-06-09 10:07:28 CEST) multi-call binary insmod: can't read '/lib/modules/2.6.32-25-server/*/*/misc/aes.*o.gz': No such file or directory insmod: can't read 'loop': No such file or directory insmod: can't read 'cdrom': No such file or directory insmod: can't read 'ide-cd': No such file or directory insmod: can't read 'isofs': No such file or directory insmod: can't read 'linear': No such file or directory insmod: can't read 'raid0': No such file or directory insmod: can't read 'raid1': No such file or directory insmod: can't read 'raid5': No such file or directory DIFFERENTIAL = INTERNAL TAPE BLOCK SIZE = NOT_BOOT = '' FATAL ERROR. Please use -k <path> to specify kernel. Please e-mail a copy of /var/log/mindi.log to the mailing list. See http://www.mondorescue.org for more information. WE CANNOT HELP unless you enclose that file. Mindi 2.0.4-r2045 is exiting End date : Tue Jul 1 14:21:15 EEST 2014 -------------------------------------------------------------- mindi --makemountlist /tmp/mondo.tmp.IAnuaa/mountlist.txt.test failed for some reason. Please run that command by hand and examine /var/log/mindi.log for more information. Perhaps your /etc/fstab file is insane. Perhaps Mindi's MakeMountlist() subroutine has a bug. We'll see. running: parted2fdisk -l 2>/dev/null | grep -i raid > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo -run-prog-thing.err --------------------------------start of output----------------------------- /dev/sda1 1 38913 312568641 fd Linux raid autodetect /dev/sdb1 * 1 38913 312568641 fd Linux raid autodetect --------------------------------end of output------------------------------ ...ran just fine. :-) Failed. [Main] libmondo-tools.c->pre_param_configuration#722: Your distribution did not pass Mondo's sanity test. [Main] newt-specific.c->fatal_error#329: Fatal error received - 'Pre-param initialization phase failed. Please review the error mes sages above, make the specified changes, then try again. Exiting...' [Main] newt-specific.c->fatal_error#347: OK, I think I'm the main PID. [Main] newt-specific.c->fatal_error#355: I'm going to do some cleaning up now. [Main] newt-specific.c->fatal_error#356: killall mindi 2> /dev/null running: ps auxww | grep " /mondo/do-not " | grep -v "grep" | awk '{print $2;}' > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: kill `ps auxww | grep " /mondo/do-not " | grep -v "grep" | awk '{print $2;}'` > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing .tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: 1: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or kill -l [exitstatus] --------------------------------end of output------------------------------ ...ran with res=512 running: ps auxww | grep " mondo.tmp " | grep -v "grep" | awk '{print $2;}' > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tm p/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: kill `ps auxww | grep " mondo.tmp " | grep -v "grep" | awk '{print $2;}'` > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: 1: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or kill -l [exitstatus] --------------------------------end of output------------------------------ ...ran with res=512 running: ps auxww | grep " ntfsclone " | grep -v "grep" | awk '{print $2;}' > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tm p/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: kill `ps auxww | grep " ntfsclone " | grep -v "grep" | awk '{print $2;}'` > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: 1: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or kill -l [exitstatus] --------------------------------end of output------------------------------ ...ran with res=512 running: umount -d /mnt/cdrom > /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.IAnuaa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: /mnt/cdrom: not mounted --------------------------------end of output------------------------------ ...ran with res=256
View this message in context: unable to run mondoarchive Ubuntu 10.04. amd
Sent from the MondoRescue Mailing List mailing list archive at Nabble.com.
------------------------------------------------------------------------------
Open source business process management suite built on Java and Eclipse
Turn processes into business applications with Bonita BPM Community Edition
Quickly connect people, data, and systems into organized workflows
Winner of BOSSIE, CODIE, OW2 and Gartner awards
http://p.sf.net/sfu/Bonitasoft
_______________________________________________
Mondo-devel mailing list
Mondo-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mondo-devel
Jeffrey D. Fulmer | 25 Jun 18:52 2014

Mondorestore and NFSv3

Is it possible to configure mondo 3.0.4 to use NFSv3 at restore time? My recovery server is old and only
supports NFSv3. I'd rather not deal with updating it.

------------------------------------------------------------------------------
Open source business process management suite built on Java and Eclipse
Turn processes into business applications with Bonita BPM Community Edition
Quickly connect people, data, and systems into organized workflows
Winner of BOSSIE, CODIE, OW2 and Gartner awards
http://p.sf.net/sfu/Bonitasoft
Bruno Cornec | 22 Jun 03:15 2014
Picon

MondoRescue 3.2.0 stabilisation

As explained more in details here:
http://brunocornec.wordpress.com/2014/06/22/mondorescue-3-2-0-stabilisation/

Bruno.
--

-- 
Open Source Profession, Linux Community Lead WW http://opensource.hp.com
EMEA EG Open Source Technology Strategist       http://hpintelco.net
FLOSS projects:     http://mondorescue.org     http://project-builder.org 
Musique ancienne? http://www.musique-ancienne.org http://www.medieval.org

------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems
Hamish McIntyre-Bhatty | 13 Jun 18:38 2014
Picon

Mondorescue with Mint 17 (Ubuntu 14.04)

Hiya, I've been using mondorescue for a good 6 months now with Mint 13
(aka Ubuntu 12.04), on an Alienware X51 R2, with no difficulties
whatsoever. Great piece of software, well done with this :) However,
after upgrading to Mint 17 (fresh install, restored files from backup),
I noticed there was no version for Ubuntu 14.04, so I used the version
for 12.04 instead. This sort-of worked, although I have to specify my
kernel path, and as I noticed earlier today, my keyboard isn't working
after booting the first recovery DVD! I tried the version for Debian 7
(equivelant to Ubuntu 13.10), it detects my kernel, but no luck with the
keyboard! Never had this problem with Mint 13, and I'm using a
bog-standard Acer keyboard, so I really have no idea why this is
happpening! Can anyone help with this?

Thanks in advance,
Hamish

------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems
Heijmans S (spir-it | 13 Jun 15:32 2014
Picon

RHEL7 support

Hello,

Now that RHEL7 is GA, is it on the roadmap to be supported (packages)?

Thanks,
Stefan

________________________________

Informatie van de Raad voor de rechtspraak, de rechtbanken, de gerechtshoven en de bijzondere colleges
vindt u op www.rechtspraak.nl.

------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems
P.V.Anthony | 11 Jun 18:19 2014
Picon
Picon

mysql not working after restore.

Hi,

After the restore process the mysql server is not working. It could be 
because the mysql server was running when mondo was archiving.

I have been searching on how to backup a live server in google but I 
have been getting pages on how to backup one database or even multiple 
database but not the users and grants.

Is there a way to backup the whole mysql server so that I can transfer 
it to the mondorestored server? So that all the database, users, grants 
and whatever else that is in the mysql server.

The other way is to stop the mysql server and copy the data directory 
and bring it across to the restored server but I do not want to stop the 
mysql server.

Need advice on how to backup and restore the whole mysql server.

Please share your thoughts and solutions.

P.V.Anthony

------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems
Derek Bliss | 5 Jun 19:13 2014
Picon

Could not mount devices /dev/vg_homeserver/lv_home

I am trying to restore a image and I keep running into this error.

Could not mount devices /dev/vg_homeserver/lv_home - shall I abort?

Underneather this error the next line in the background says 

Configur /dev/sda1 from 512000 KB to 512004 KB

I have read a few other topics where it is saying that it is because there is a change in the disc size. It is the same hard drive. How would I go about fixing this so I can restore the image?

Thank you



------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their 
applications. Written by three acclaimed leaders in the field, 
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/NeoTech
_______________________________________________
Mondo-devel mailing list
Mondo-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mondo-devel
Hugo Vanwoerkom | 3 Jun 19:20 2014

mondo fails: says to reinstall! [Urgent]

Hi,

Running Debian Sid.
After running mondo/mindi fine for a year, suddenly mondo fails saying 
he cannot find mindi's version and to reinstall them both then 
segfaults. When I do the latter he fails the same way again.

This is urgent because I cannot uuse mondoarchive now!

I enclose
1. the sequence of mondo/mindi reinstall and failure
2. mindi.log
3. mondoarchive.log

Thanks!

Hugo
Script started on Tue 03 Jun 2014 11:53:09 AM CDT
root <at> hda5:~# apt-get remove mondo

Reading package lists... 0%

Reading package lists... 100%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree...
50%

Building dependency tree... 50%

Building dependency tree       


Reading state information... 0%

Reading state information... 0%

Reading state information... Done

The following packages were automatically installed and are no longer required:
  buffer libboost-iostreams1.54.0 libepub0 libgeoclue0 libkidletime4
  libnepomukcore4 libpoppler-qt4-4 libzip2 nepomuk-core-data
  nepomuk-core-runtime shared-desktop-ontologies
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  mondo
0 upgraded, 0 newly installed, 1 to remove and 31 not upgraded.
After this operation, 1,866 kB disk space will be freed.
Do you want to continue? [Y/n] 


(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ...
15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database
... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading
database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ...
70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database
... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 126773 files and
directories currently installed.)
Removing mondo (3.0.4-1) ...
dpkg: warning: while removing mondo, directory '/var/cache/mondo' not empty so not removed
Processing triggers for man-db (2.6.7.1-1) ...
root <at> hda5:~# apt-get remove mondo    indi

Reading package lists... 0%

Reading package lists... 100%

Reading package lists... Done


Building dependency tree... 0%

Building dependency tree... 0%

Building dependency tree...
50%

Building dependency tree... 50%

Building dependency tree       


Reading state information... 0%

Reading state information... 0%

Reading state information... Done

The following packages were automatically installed and are no longer required:
  buffer libboost-iostreams1.54.0 libepub0 libgeoclue0 libkidletime4
  libnepomukcore4 libpoppler-qt4-4 libzip2 mtools nepomuk-core-data
  nepomuk-core-runtime shared-desktop-ontologies syslinux
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  mindi
0 upgraded, 0 newly installed, 1 to remove and 31 not upgraded.
After this operation, 598 kB disk space will be freed.
Do you want to continue? [Y/n] 


(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ...
15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database
... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading
database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ...
70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database
... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 126720 files and
directories currently installed.)
Removing mindi (2.1.7-1) ...
Processing triggers for man-db (2.6.7.1-1) ...
root <at> hda5:~# ls
fstab.sdb3                                   mcmfmt                            mindi-busybox_1.18.5-3_amd64.deb  screen.php
google-chrome-beta_34.0.1847.14-1_amd64.deb  mindi_2.1.3-1_amd64.deb          
mondo_3.0.2-1_amd64.deb           sgd.lst
google-chrome-beta.list                      mindi_2.1.6-1_amd64.deb          
mondo_3.0.4-1_amd64.deb           typescript
google-chrome.list                           mindi_2.1.7-1_amd64.deb           preferences
mc                                           mindi-busybox_1.18.5-2_amd64.deb  RESULTS.txt
root <at> hda5:~# dpkg -i mondo_3.0.4-1_amd64.deb 
Selecting previously unselected package mondo.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ...
15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database
... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading
database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ...
70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database
... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 126640 files and
directories currently installed.)
Preparing to unpack mondo_3.0.4-1_amd64.deb ...
Unpacking mondo (3.0.4-1) ...
dpkg: dependency problems prevent configuration of mondo:
 mondo depends on mindi (>= 2.0.7); however:
  Package mindi is not installed.

dpkg: error processing package mondo (--install):
 dependency problems - leaving unconfigured
Processing triggers for man-db (2.6.7.1-1) ...
Errors were encountered while processing:
 mondo
root <at> hda5:~# dpkg -i mondo_3.0.4-1_amd64.deb                       
indi_2.1.7-1_amd64.deb 
Selecting previously unselected package mindi.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ...
15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database
... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading
database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ...
70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database
... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 126693 files and
directories currently installed.)
Preparing to unpack mindi_2.1.7-1_amd64.deb ...
Unpacking mindi (2.1.7-1) ...
Setting up mindi (2.1.7-1) ...
Processing triggers for man-db (2.6.7.1-1) ...
root <at> hda5:~# dpkg -i mindi_2.1.7-1_amd64.deb ondo_3.0.4-1_amd64.deb 
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ...
15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database
... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading
database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ...
70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database
... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 126773 files and
directories currently installed.)
Preparing to unpack mondo_3.0.4-1_amd64.deb ...
Unpacking mondo (3.0.4-1) over (3.0.4-1) ...
Setting up mondo (3.0.4-1) ...
Processing triggers for man-db (2.6.7.1-1) ...
root <at> hda5:~# ex  mono    do_mondo-n_w
bash: do_mondo-n_w: command not found
root <at> hda5:~# do_mondo-n_w-[1 <at> _
Initializing...
See /var/log/mondoarchive.log for details of backup run.
Checking sanity of your Linux distribution
Could not ascertain mindi's version number.
You have not installed Mondo and/or Mindi properly.
Please uninstall and reinstall them both.
Fatal error... Please reinstall Mondo and Mindi.
---FATALERROR--- Please reinstall Mondo and Mindi.
If you require technical support, please contact the mailing list.
See http://www.mondorescue.org for details.
The list's members can help you, if you attach that file to your e-mail.
Log file: /var/log/mondoarchive.log
Mondo has aborted.
Execution run ended; result=254
Type 'less /var/log/mondoarchive.log' to see the output log
/usr/bin/do_mondo_n_w: line 24:  9267 Segmentation fault      mondoarchive -Oi -d /sdd3/foo -T /sdd3/ -S
/sdb6/ -I "/sdd3/new_wheezy" -s 4380m -l GRUB -g -e
root <at> hda5:~# exit
exit

Script done on Tue 03 Jun 2014 11:57:01 AM CDT
mindi v2.1.7-r3184
x86_64 architecture detected
mindi called with the following arguments:
-V
Start date : Tue Jun  3 11:56:49 CDT 2014
-----------------------------
MONDO_SHARE = /usr/share/mondo
MINDI_LIB = /usr/lib/mindi
MINDI_SBIN = /usr/sbin
MINDI_CONF = /etc/mindi
-----------------------------
 Mindi configuration file    
-----------------------------
EXTRA_SPACE=92160
BOOT_SIZE=40960
FORCE_MODS="ohci_pci ehci_pci ohci-pci ehci-pci"

-----------------------------
In Mindi
--------
EXTRA_SPACE = 92160
BOOT_SIZE = 40960
--------
FATAL ERROR. Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may
download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml
Please e-mail a copy of /var/log/mindi.log to the mailing list.
See http://www.mondorescue.org for more information.
WE CANNOT HELP unless you enclose that file.

Mindi 2.1.7-r3184 is exiting
End date : Tue Jun  3 11:56:50 CDT 2014
Time started: Tue Jun  3 11:56:49 2014

running: dmesg -n1 > /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
Mondo Archive v3.0.4-r3177 --- http://www.mondorescue.org
running x86_64 binaries
running on x86_64 architecture
-----------------------------------------------------------
NB: Mondo logs almost everything, so don't panic if you see
some error messages.  Please read them carefully before you
decide to break out in a cold sweat.    Despite (or perhaps
because of) the wealth of messages. some users are inclined
to stop reading this log. If Mondo stopped for some reason,
chances are it's detailed here.  More than likely there's a
message at the very end of this log that will tell you what
is wrong. Please read it!                          -Devteam
-----------------------------------------------------------
Zero...
[Main] mondoarchive.c->welcome_to_mondoarchive#104: One...
	[Main] mondoarchive.c->welcome_to_mondoarchive#105: Two...
		[Main] mondoarchive.c->welcome_to_mondoarchive#106: Three...
			[Main] mondoarchive.c->welcome_to_mondoarchive#107: Four...
	[Main] mondoarchive.c->distro_specific_kludges_at_start_of_mondoarchive#124: Unmounting old
ramdisks if necessary
running: mount | grep cdrom | grep super > /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran with res=256
running: mount | grep floppy | grep super > /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran with res=256
[Main] libmondo-tools.c-≥mount_boot_if_necessary#1249: Started sub
			[Main] libmondo-tools.c-≥mount_boot_if_necessary#1250: About to set g_boot_mountpt[0] to '\0'
			[Main] libmondo-tools.c-≥mount_boot_if_necessary#1252: Done. Great. Seeting command to something
			[Main] libmondo-tools.c-≥mount_boot_if_necessary#1255: Cool. Command = 'grep -v ":" /etc/fstab |
grep -vE '^#.*$' | grep -E "[ 	]/boot[ 	]" | tr -s ' ' '	' | cut -f1 | head -n1'
			[Main] libmondo-tools.c-≥mount_boot_if_necessary#1259: tmp = ''
[Main] libmondo-tools.c-≥mount_boot_if_necessary#1305: Ended sub
[Main] libmondo-tools.c-≥get_kernel_version#254: g_kernel_version = 3.140000
running: rm -Rf /var/cache/mondo/changed.files* >
/tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
Checking sanity of your Linux distribution
running: grep ramdisk /proc/devices > /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
1 ramdisk
--------------------------------end of output------------------------------
...ran just fine. :-)
running: mount | grep -Ew 'vfat|fat|dos' | grep -vE "/dev/fd|nexdisk" >
/tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran with res=256
			[Main] libmondo-files.c-≥find_home_of_exe#369: find_home_of_exe () --- Found cmp at /usr/bin/cmp
------------- mindi logfile included -------------------------
mindi v2.1.7-r3184
x86_64 architecture detected
mindi called with the following arguments:
-V
Start date : Tue Jun  3 11:56:49 CDT 2014
-----------------------------
MONDO_SHARE = /usr/share/mondo
MINDI_LIB = /usr/lib/mindi
MINDI_SBIN = /usr/sbin
MINDI_CONF = /etc/mindi
-----------------------------
 Mindi configuration file    
-----------------------------
EXTRA_SPACE=92160
BOOT_SIZE=40960
FORCE_MODS="ohci_pci ehci_pci ohci-pci ehci-pci"

-----------------------------
In Mindi
--------
EXTRA_SPACE = 92160
BOOT_SIZE = 40960
--------
FATAL ERROR. Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may
download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml
Please e-mail a copy of /var/log/mindi.log to the mailing list.
See http://www.mondorescue.org for more information.
WE CANNOT HELP unless you enclose that file.

Mindi 2.1.7-r3184 is exiting
End date : Tue Jun  3 11:56:50 CDT 2014
--------------------------------------------------------------
running: mindi -V > /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
FATAL ERROR. Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may
download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml
Please e-mail a copy of /var/log/mindi.log to the mailing list.
See http://www.mondorescue.org for more information.
WE CANNOT HELP unless you enclose that file.

--------------------------------end of output------------------------------
...ran with res=65280
Could not ascertain mindi's version number.
You have not installed Mondo and/or Mindi properly.
Please uninstall and reinstall them both.
[Main] newt-specific.c-≥fatal_error#329: Fatal error received - 'Please reinstall Mondo and Mindi.'
		[Main] newt-specific.c-≥fatal_error#347: OK, I think I'm the main PID.
	[Main] newt-specific.c-≥fatal_error#355: I'm going to do some cleaning up now.
			[Main] newt-specific.c-≥fatal_error#356: killall mindi 2> /dev/null
running: ps auxww | grep " /mondo/do-not " | grep -v "grep" | awk '{print $2;}' >
/tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: kill `ps auxww | grep " /mondo/do-not " | grep -v "grep" | awk '{print $2;}'` >
/tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
sh: 1: kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or
kill -l [exitstatus]
--------------------------------end of output------------------------------
...ran with res=512
running: ps auxww | grep " mondo.tmp " | grep -v "grep" | awk '{print $2;}' >
/tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: kill `ps auxww | grep " mondo.tmp " | grep -v "grep" | awk '{print $2;}'` >
/tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
sh: 1: kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or
kill -l [exitstatus]
--------------------------------end of output------------------------------
...ran with res=512
running: ps auxww | grep " ntfsclone " | grep -v "grep" | awk '{print $2;}' >
/tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: kill `ps auxww | grep " ntfsclone " | grep -v "grep" | awk '{print $2;}'` >
/tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
sh: 1: kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or
kill -l [exitstatus]
--------------------------------end of output------------------------------
...ran with res=512
running: umount -d /mnt/cdrom > /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.XOW2gV/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
umount: /mnt/cdrom: not mounted
--------------------------------end of output------------------------------
...ran with res=256
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their 
applications. Written by three acclaimed leaders in the field, 
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/NeoTech
_______________________________________________
Mondo-devel mailing list
Mondo-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mondo-devel
Alan Pittman | 2 Jun 17:23 2014

Mondoarchive issues

Hi,
  I'm having issues with Mondoarchive on a RHEL5.10 server. The process wants to create three ISO images when
is completes. Most of the time, however, it hangs while trying to create the third ISO images. Here's my
delima. It should never be creating three IOS images. The amount of data it's backing up should fit on one
4GB DVD (ISO image). Below is the output I see from standard out. I just started the copy/paste from the
point that archive is reporting on the file backups. The last line you see below is the end of the output at
the point that it hangs.

Attached are the mindi and mondoarchive log

Here is the server info

[root <at> l17acrp1 ~]# rpm -q -a | grep mindi
mindi-2.1.7-1.rhel5
mindi-busybox-1.18.5-3.rhel5
[root <at> l17acrp1 ~]# rpm -q -a | grep mondo
mondo-3.0.4-1.rhel5
[root <at> l17acrp1 ~]# uname -a
Linux l17acrp1 2.6.18-371.3.1.el5 #1 SMP Mon Nov 11 03:23:58 EST 2013 x86_64 x86_64 x86_64 GNU/Linux
[root <at> l17acrp1 ~]# cat /etc/*lease
Red Hat Enterprise Linux Server release 5.10 (Tikanga)
[root <at> l17acrp1 ~]#

Mondoarchive standard out:

Done.
Archiving regular files to media          
Archiving regular files
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- Please wait. This may take a couple of hours.
---progress-form---3--- Working...
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   1% done;  0:00 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 1: [*...................] 2% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   1% done; 27:30 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 1: [*...................] 2% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   1% done; 13:40 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 1: [*...................] 2% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   1% done; 12:40 to go
Please be patient. Do not be alarmed by on-screen inactivity.
---evalcall---1---    Running mkisofs to make ISO #1  
---evalcall---2--- TASK:  [****................]  17% done;  0:04 to go
---evalcall---E---
---evalcall---1---    Running mkisofs to make ISO #1  
---evalcall---2--- TASK:  [*******.............]  34% done;  0:03 to go
---evalcall---E---
---evalcall---1---    Running mkisofs to make ISO #1  
---evalcall---2--- TASK:  [************........]  60% done;  0:02 to go
---evalcall---E---
Call to mkisofs to make ISO (ISO #1) ...OK
Please reboot from the 1st ISO in Compare Mode, as a precaution.
---evalcall---1---      Verifying ISO #1's tarballs   
---evalcall---2--- TASK:  [*****...............]  25% done;  0:00 to go
---evalcall---E---
---evalcall---1---      Verifying ISO #1's tarballs   
---evalcall---2--- TASK:  [**********..........]  50% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Verifying ISO #1's tarballs   
---evalcall---2--- TASK:  [***************.....]  75% done;  0:01 to go
---evalcall---E---
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 1: [*...................] 2% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   2% done; 246:22 to go
Warning! CD is too big. It occupies 32062852 KB, which is more than the 4096 KB 
Please be patient. Do not be alarmed by on-screen inactivity.
Call to mkisofs to make ISO (ISO #2) ...OK
Please reboot from the 1st ISO in Compare Mode, as a precaution.
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 2:
[*********************************************************************************************************************************************************]
764% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   3% done; 212:31 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 3: [*...................] 1% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   3% done; 176:00 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 3: [*...................] 2% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   4% done; 149:54 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 3: [*...................] 2% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   4% done; 130:21 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 3: [*...................] 2% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   5% done; 115:08 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- ISO 3: [*...................] 2% used
---progress-form---3--- Please wait. This m

Alan

Attachment (mondoarchive.log.gz): application/x-gzip, 50 KiB
Attachment (mindi.log.gz): application/x-gzip, 37 KiB
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their 
applications. Written by three acclaimed leaders in the field, 
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/NeoTech
_______________________________________________
Mondo-devel mailing list
Mondo-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mondo-devel
In | 24 May 18:40 2014
Picon

convert cdrom to nfs

Is it possible to take files from an existing CD-R mondoarchive and change to
using a network nfs restoral using PXE?  What file modifications are
necessary?  Thanks

--
View this message in context: http://mondorescue-mailing-list.679749.n3.nabble.com/convert-cdrom-to-nfs-tp4026229.html
Sent from the MondoRescue Mailing List mailing list archive at Nabble.com.

------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
Will Hopper | 13 May 20:39 2014
Picon

Can't find/mount USB's using boot disk

Hi everyone,

I'm having a problem using the restore disk, specifically I'm unable to use it because it can't find or mount any external storage devices, which is where all the recovery tools are!

Changing the usb=/dev/sdx boot parameter doesn't help things, no matter what I try, the process of mounting the device and untarring the additional tools fails, saying 'dev/sdx is not a valid block device".

When I'm dropped into the shell, fdisk -l shows the internal HDD, but no matter what USB stick or port I use, fdisk never shows any external devices.

I assume I'm missing a kernel module on the boot disk? I know for a fact that I'm missing xhci_hcd, but as far as I know that should only cause problems for usb 3.0 ports, and this problem affects usb 2 ports as well. I can't seem to get xhci_hcd onto the boot disk, there appears to be a bug in how the name is processed, which leaves mindi trying to add 'xhci-' which doesn't exist.

I've attached the mindi, mondoarchive, and mondorestore logs from my attempts, as well as the mindi deplist.txt and mindi.conf.

Thanks in advance for any help!

- Will
Attachment (mondologs.tar.gz): application/x-gzip, 139 KiB
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Mondo-devel mailing list
Mondo-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mondo-devel

Gmane