scanModem, Xandros Desktop kernel 2.6.9-x1

my name is Nathan please return information to wassup__69 <at> hotmail.com 
thankyou

DO use the following line as the email Subject Line, to alert cogent 
experts:
      scanModem, Xandros Desktop kernel 2.6.9-x1
Occassionally reponses are blocked by an Internet Providers mail filters.
So do in a day also check the Archived responses at DISCUSS <at> linmodems.org
Code updated on:  2005_March_27
------------ --------------  System information ------------------------
Xandros Desktop 3.0.1 OC
on System with processor: i686
currently under kernel:   2.6.9-x1
The kernel was assembled with compiler:  3.3.4
a gcc package must be installed to support driver compiling

Checking for kernel-headers needed for compiling.

A /dev/modem symbolic link is not set.
Checking for /dev/tts/  devices
total 0
crw-rw-rw-  1 root tty 4, 64 2005-03-31 15:56 0
crw-rw-rw-  1 root tty 4, 65 2005-03-31 15:56 1
crw-rw-rw-  1 root tty 4, 66 2005-03-31 15:56 2
crw-rw-rw-  1 root tty 4, 67 2005-03-31 15:56 3
crw-rw-rw-  1 root tty 4, 68 2005-03-31 15:56 4
crw-rw-rw-  1 root tty 4, 69 2005-03-31 15:56 5
crw-rw-rw-  1 root tty 4, 70 2005-03-31 15:56 6
crw-rw-rw-  1 root tty 4, 71 2005-03-31 15:56 7
Checking for USB modems

Help me please for intel modem 8086:266d with ltmodem driver...???????????

Hi jacques,
i try using wvdial just now, here are in attachment my wvdialconf.log,
wvdial.log, wvdial.conf. but i still cannot connect to internet.
theres a little problem when i try wvdial, i got a very long delay
between these (see wvdial_log.txt)
--> pid of pppd: 5225
(****delay****)
--> Using interface ppp0
it was very long , at that time i cannot  move my mouse and my
computer look like "hangs"  then appear  --> Using interface ppp0 ....
and it  back to normal again, unfortunately i still cannot connect to
internet.
 _____________________________________________________________
 SUBHANALLAH Berikan saya jalan keluar untuk masalah ini.
 _____________________________________________________________
--------------------
Best Regards, 
Imamuddin Akbar

[Dialer Defaults]
Modem = /dev/modem
Baud = 57600
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 =
Area Code =
Phone = 080989999
Username = telkomnet <at> instan

Re: scanModem with file

Hey Hey!

It works!! lol

  ^_^

a modern day miracle...

Quoting Jacques Goldberg <goldberg <at> phep2.technion.ac.il>:

> On Wed, 30 Mar 2005, BatMan wrote:
>
>> here is file!
>> > I would like to get my Dialup Modem working on Linux.
>> > Fortunately, i can get to the internet via ethernet.
>> > I ran the ScanModem program.
>> > i looked at the ModemData.txt file. Scary!!
>> > It looks like i need to Find the drivers and Compile it.
>> > Can you teach me how to properly read the ModemData.txt? (just 
>> copy/paste the
>> > lines that tell you whats important)
>
>     You need to know your Linux distribution and kernel:
> BEGIN QUOTE
>     Feature List:  Primary  Subsystem Distr  KernelVer   kernel default
> CPU
>  ./scanModem test 8086:1080 1028:1000 SuSE 2.6.5-7.111-default 3.3.3 3.3.3
> i686
> END QUOTE
> Does not say which SuSE you have. 9.1 ? 9.2?

Toshiba A10, slmodem-2.9.10, problem compiling the driver

Hi everyone!!

I am trying to set up my modem under linux, and don't understand what is wrong, when I used the make command it
was ok, but i am receiving an error when run makefile, please have a look

[root <at> localhost slmodem-2.9.10]# make install

make -C modem all

make[1]: Entering directory `/mnt/windows/Azoth/Dalos/Linux/slmodem-2.9.10/modem '

make[1]: Leaving directory `/mnt/windows/Azoth/Dalos/Linux/slmodem-2.9.10/modem'

make -C drivers KERNEL_DIR=/lib/modules/2.6.8.1-10mdk/build

make[1]: Entering directory `/mnt/windows/Azoth/Dalos/Linux/slmodem-2.9.10/drive rs'

cc -I/lib/modules/2.6.8.1-10mdk/build/include -o kernel-ver kernel-ver.c

make all KERNEL_VER=2.6.8

make[2]: Entering directory `/mnt/windows/Azoth/Dalos/Linux/slmodem-2.9.10/drive rs'

make modules -C /lib/modules/2.6.8.1-10mdk/build SUBDIRS=/mnt/windows/Azoth/Dalo s/Linux/slmodem-2.9.10/drivers

make: *** /lib/modules/2.6.8.1-10mdk/build: No such file or directory. Stop.

make: Entering an unknown directorymake: Leaving an unknown directorymake[2]: ** * [all] Error 2

make[2]: Leaving directory `/mnt/windows/Azoth/Dalos/Linux/slmodem-2.9.10/driver s'

BLDrecord

Hi ,
i do what u guide, but can't finish it.

here is the result :

		
__________________________________ 
Do you Yahoo!? 
Yahoo! Personals - Better first dates. More second dates. 
http://personals.yahoo.com

Linux Newbies should check DOCs/Installers and if still necessary
	http://www.heby.de/ltmodem for already available driver installers

Together with information included in DOCs/,
this report may enable you to solve problems.
But if further help is needed, send BLDrecord.txt to discuss <at> linmodems.org
Please use the following in the email Subject Line:
Lucent modem, SuSE SuSE Linux 7.2 (i386) VERSION = 7.2 2.4.4-4GB
DISTRO=SuSE-release
DISTR=SuSE
DVERSION=SuSE Linux 7.2 (i386) VERSION = 7.2
ACTION=./build_module --with-force=yes    
WHOAMI=root
Sun Apr 10 17:07:44 PDT 2005
Linux linux 2.4.4-4GB #1 Fri May 18 14:11:12 GMT 2001 i686 unknown

------------ beginning SCANMODEM section ------

Re: Ok, I give up! Help Please!

Zero

RE:  Sorry, assembly of the needed header file:    modversions.h"
 was not specified during configuration of the kernel sources.
 Withing the section LOADABLE MODULE SUPPORT:
   [*]   Set version information on all module symbols
 which is necessary to specify the assembly of modeversions.h
 Consequently compiling of the drivers will fail at the next step.
 Properly configuring your sources may be aided by for RPM using 
Distros"
==========

You must install and configure a kernel-source-2.4.21-27.0.1.EL  package before running 
./build_module

I'll send you some details separately

MarvS

> Hi,
>  
> First off, I will admit, I am NOT someone who is savvy in C or kernel 
> sources or whatever.. I'm a voice guy, I have been for years.. With 
> that 
> out of the way, make room for the stupid questions.
>  
> I recently built an asterisk <at> home box (CentOS 3.4 which I guess is 
> repackaged RHEL 3)
>  
> When I run ./build_module it goes throug the script but at the end I 

Re: Toshiba A10, slmodem-2.9.10, problem compiling the driver

EOLO

RE:  /lib/modules/2.6.8.1-10mdk/build: No such file or directory. Stop.

You must First install the package kernel-source-2.6.8.1-10mdk
before compiling.

Also, the slmodem software should be unpacked in a Linux partition, not within `/mnt/windows/   

MarvS

> Hi everyone!!
> 
> I am trying to set up my modem under linux, and don't understand what is wrong, 
> when I used the make command it was ok, but i am receiving an error when run 
> makefile, please have a look
> 
>  
> 
> [root <at> localhost slmodem-2.9.10]# make install
> 
> make -C modem all
> 
> make[1]: Entering directory `/mnt/windows/Azoth/Dalos/Linux/slmodem-2.9.10/modem 
> '
> 
> make[1]: Leaving directory `/mnt/windows/Azoth/Dalos/Linux/slmodem-2.9.10/modem'
> 
> make -C drivers KERNEL_DIR=/lib/modules/2.6.8.1-10mdk/build
> 

Remove me, Please. :o)

-----Original Message-----
From: Jacques Goldberg <goldberg <at> phep2.technion.ac.il>
Sent: Mar 30, 2005 8:53 AM
To: Pierre Sirieix <psirieix <at> nerim.fr>
Cc: LinModems <discuss <at> linmodems.org>
Subject: Re: Internal Modem Sony Vaio

   Of course. This is exactly the information which I needed. The modem
part is CXT21 by Conexant.
   Thus you need the Linuxant HSF driver.
   The instructions follow and you do not need to search further for what
you will need to know: distribution Mandrake, kernel 2.6.8.1-12mdk, modem
type HSF, processor i686

 If you do not already know, find out in your ModemData.txt if your modem is of
type HSF or of type HCF.
 In the following, HxF stands for the one to be used.
 Note down your distribution, your processor, and your kernel (shown in the
 System Information section of ModemData.txt).
-Go to http://www.linuxant.com/drivers
-Find the HxF menu in the left part of the screen.
-Read README.
-Read INSTALLATION.
-Click DOWNLOAD.
-Accept conditions.
-Find text: "You can download HxF modem packages from the driver
            download page." and click on that link.
-Since you have noted your distribution, your processor, and your kernel
 (shown in the System Information section of ModemData.txt), identify the

problema win modem mepis2.6.7

Salve,
il modem blocca mepis dopo il comando atdtnumero telefono

Allego il risultato del file ModemData.txt

 DO use the following line as the email Subject Line, to alert cogent experts:
      scanModem, MEPIS \s kernel 2.6.7
 Occassionally reponses are blocked by an Internet Providers mail filters.
 So do in a day also check the Archived responses at DISCUSS <at> linmodems.org
Code updated on:  2005_March_27
------------ --------------  System information ------------------------
MEPIS 
 on System with processor: i686
 currently under kernel:   2.6.7
 The kernel was assembled with compiler:  3.3.4
 with current System compiler GCC=3.3.4
    /usr/bin/gcc -> gcc-3.3

Checking for kernel-headers needed for compiling.

 Modem symbolic link is:  /dev/modem -> /dev/ttySL0
 Checking for USB modems
 None found

Modem candidates are at PCI_buses:  0000:00:08.0

Providing detail for device at PCI_bus 0000:00:08.0
  with vendor-ID:device-ID
     ----:----
Class 0703: 10b9:5457   Modem: ALi Corporation M5457 AC'97 Modem Controller 

Re: Problem with AMR Modem / Fedora Core 3

   Oops, sorry ! I had missed it (slamr_FC3-kv_2.6.9-1.tar.gz)
   Marv, is your slamr.ko just the result of the compilation from
slmodem-2.9.9b?
   If so I can trivially make the same for 2.6.10-1.770

                                      Jacques

On Fri, 1 Apr 2005 marvstod <at> comcast.net wrote:

> Jacques,
>
> [ ] slamr_FC3_kv_2.6.9-1..> 18-Dec-2004 18:59   224k  i
> is on your site and is my donation
>
> Jamie,
>  Any driver is kernel version specific and you ALWAYS have to update them with the kernel change.  Compiling
under Fedora is near trivial anyway, so just follow Jacques instructions and use 2.9.9.b
>
> MarvS
>
>
> > On Thu, 31 Mar 2005, Jaime C. Rubin de Celis wrote:
> >
> > > Short story:
> > > I found this driver on your page:
> > > slamr_FC3_kv_2.6.9-1.667_i686.tar.gz
> > > It worked fine with that kernel, but when I updated to 2.6.10-1.770_FC3
> > > it didn't work anymore.
> > > Do you have a new driver?