Robin Getz | 2 Apr 2009 17:03
Favicon

2009R1 Release Update...

Sonic and I talked last night about making the release branch for U-Boot and 
the kernel/uClinux-dist on the 8th of next week.

Is there anything (new feature that anyone is working on which you want in the 
2009R1 release) that would hold that up?

Thanks
-Robin
Mike Frysinger | 2 Apr 2009 18:36
Favicon

Blackfin kernel building

Summary:

   Building svn-trunk (dbab4b56)
### BF518F-EZBRD_defconfig: OK
### BF526-EZBRD_defconfig: OK
### BF527-EZKIT_defconfig: OK
### BF533-EZKIT_defconfig: OK
### BF533-STAMP_defconfig: OK
### BF537-STAMP_defconfig: OK
### BF538-EZKIT_defconfig: OK
### BF548-EZKIT_defconfig: OK
### BF561-EZKIT_defconfig: OK
### BlackStamp_defconfig: OK
### CM-BF527_defconfig: OK
### CM-BF533_defconfig: OK
### CM-BF537E_defconfig: OK
### CM-BF537U_defconfig: OK
### CM-BF548_defconfig: OK
### CM-BF561_defconfig: OK
### H8606_defconfig: OK
### IP0X_defconfig: OK
### PNAV-10_defconfig: OK
### SRV1_defconfig: OK
### TCM-BF537_defconfig: OK

   Building blackfin-2.6 (5d80f8e5)
### BF518F-EZBRD_defconfig
###### BF512: FAIL
###### BF514: FAIL
###### BF516: FAIL
(Continue reading)

Mike Frysinger | 3 Apr 2009 18:16
Favicon

Blackfin kernel building

Summary:

   Building svn-trunk (7b7bc8da)
### BF518F-EZBRD_defconfig: OK
### BF526-EZBRD_defconfig: OK
### BF527-EZKIT_defconfig: OK
### BF533-EZKIT_defconfig: OK
### BF533-STAMP_defconfig: OK
### BF537-STAMP_defconfig: OK
### BF538-EZKIT_defconfig: OK
### BF548-EZKIT_defconfig: OK
### BF561-EZKIT_defconfig: OK
### BlackStamp_defconfig: OK
### CM-BF527_defconfig: OK
### CM-BF533_defconfig: OK
### CM-BF537E_defconfig: OK
### CM-BF537U_defconfig: OK
### CM-BF548_defconfig: OK
### CM-BF561_defconfig: OK
### H8606_defconfig: OK
### IP0X_defconfig: OK
### PNAV-10_defconfig: OK
### SRV1_defconfig: OK
### TCM-BF537_defconfig: OK

   Building blackfin-2.6 (5d80f8e5)
### BF518F-EZBRD_defconfig
###### BF512: FAIL
###### BF514: FAIL
###### BF516: FAIL
(Continue reading)

Robin Getz | 3 Apr 2009 23:06
Favicon

Re: 2009R1 Release Update...

On Thu 2 Apr 2009 11:03, Robin Getz pondered:
> Sonic and I talked last night about making the release branch for U-Boot
> and 
> the kernel/uClinux-dist on the 8th of next week.
> 
> Is there anything (new feature that anyone is working on which you want
> in the 2009R1 release) that would hold that up?

Tom indicated that he would not have the libjpeg optimisations done until 
Wed. - so Friday might be better to do the branch???
Mike Frysinger | 6 Apr 2009 17:38
Favicon

Blackfin kernel building

Summary:

   Building svn-trunk (53547e3a)
### BF518F-EZBRD_defconfig: OK
### BF526-EZBRD_defconfig: OK
### BF527-EZKIT_defconfig: OK
### BF533-EZKIT_defconfig: OK
### BF533-STAMP_defconfig: OK
### BF537-STAMP_defconfig: OK
### BF538-EZKIT_defconfig: OK
### BF548-EZKIT_defconfig: OK
### BF561-EZKIT_defconfig: OK
### BlackStamp_defconfig: OK
### CM-BF527_defconfig: OK
### CM-BF533_defconfig: OK
### CM-BF537E_defconfig: OK
### CM-BF537U_defconfig: OK
### CM-BF548_defconfig: OK
### CM-BF561_defconfig: OK
### H8606_defconfig: OK
### IP0X_defconfig: OK
### PNAV-10_defconfig: OK
### SRV1_defconfig: OK
### TCM-BF537_defconfig: OK

   Building blackfin-2.6 (5d80f8e5)
### BF518F-EZBRD_defconfig
###### BF512: FAIL
###### BF514: FAIL
###### BF516: FAIL
(Continue reading)

Zhang, Sonic | 7 Apr 2009 06:02
Favicon

Re: 2009R1 Release Update...

In this case, I would suggest to branch uClinux-dist on Apr. 20, when I
comes back. But, Mike can still branch and build binaries for 2009R1-RC1
uboot this week.

Sonic

-----Original Message-----
From: uclinux-dist-devel-bounces@...
[mailto:uclinux-dist-devel-bounces@...] On
Behalf Of
Robin Getz
Sent: Saturday, April 04, 2009 5:07 AM
To: uclinux-dist-devel@...
Cc: Ajamian, Thomas
Subject: Re: [Uclinux-dist-devel] 2009R1 Release Update...

On Thu 2 Apr 2009 11:03, Robin Getz pondered:
> Sonic and I talked last night about making the release branch for 
> U-Boot and the kernel/uClinux-dist on the 8th of next week.
> 
> Is there anything (new feature that anyone is working on which you 
> want in the 2009R1 release) that would hold that up?

Tom indicated that he would not have the libjpeg optimisations done
until Wed. - so Friday might be better to do the branch???
_______________________________________________
Uclinux-dist-devel mailing list
Uclinux-dist-devel@...
https://blackfin.uclinux.org/mailman/listinfo/uclinux-dist-devel
(Continue reading)

Mike Frysinger | 7 Apr 2009 09:04
Picon

Re: 2009R1 Release Update...

On Tue, Apr 7, 2009 at 00:02, Zhang, Sonic wrote:
> In this case, I would suggest to branch uClinux-dist on Apr. 20, when I
> comes back. But, Mike can still branch and build binaries for 2009R1-RC1
> uboot this week.

i dont have any usb hardware with me atm and wont have any till the
end of this week.  with Bryan gone, i'll have to figure out the musb
driver in u-boot so that it works in 2009.03.  other than that, i dont
know of any drivers or issues that'd prevent branching at this point
(once graf reverts the interrupt changes).
-mike
Zhang, Sonic | 7 Apr 2009 09:18
Favicon

Re: 2009R1 Release Update...

We don't need to branch 2009.03. This is for future development. Only
branch 2008.10 please. Graf is looking at a nand bug on bf526-ezbrd.
After he fixes it , you can branch.

Sonic

-----Original Message-----
From: Mike Frysinger [mailto:vapier.adi@...] 
Sent: Tuesday, April 07, 2009 3:05 PM
To: Zhang, Sonic
Cc: Robin Getz; uclinux-dist-devel@...; Ajamian, Thomas
Subject: Re: [Uclinux-dist-devel] 2009R1 Release Update...

On Tue, Apr 7, 2009 at 00:02, Zhang, Sonic wrote:
> In this case, I would suggest to branch uClinux-dist on Apr. 20, when 
> I comes back. But, Mike can still branch and build binaries for 
> 2009R1-RC1 uboot this week.

i dont have any usb hardware with me atm and wont have any till the end
of this week.  with Bryan gone, i'll have to figure out the musb driver
in u-boot so that it works in 2009.03.  other than that, i dont know of
any drivers or issues that'd prevent branching at this point (once graf
reverts the interrupt changes).
-mike
gyang | 7 Apr 2009 09:20
Favicon

Re: 2009R1 Release Update...


On Tue, 2009-04-07 at 03:04 -0400, Mike Frysinger wrote:
> On Tue, Apr 7, 2009 at 00:02, Zhang, Sonic wrote:
> > In this case, I would suggest to branch uClinux-dist on Apr. 20, when I
> > comes back. But, Mike can still branch and build binaries for 2009R1-RC1
> > uboot this week.
> 
> i dont have any usb hardware with me atm and wont have any till the
> end of this week.  with Bryan gone, i'll have to figure out the musb
> driver in u-boot so that it works in 2009.03.  other than that, i dont
> know of any drivers or issues that'd prevent branching at this point
> (once graf reverts the interrupt changes).

I have another nand bug [#5013] on tracking.

> -mike
> _______________________________________________
> Uclinux-dist-devel mailing list
> Uclinux-dist-devel@...
> https://blackfin.uclinux.org/mailman/listinfo/uclinux-dist-devel
Mike Frysinger | 7 Apr 2009 09:26
Picon

Re: 2009R1 Release Update...

On Tue, Apr 7, 2009 at 03:18, Zhang, Sonic wrote:
> We don't need to branch 2009.03. This is for future development. Only
> branch 2008.10 please.

yeah, that's true ... there's no need to include anything other than
2008.10 in the branch
-mike

Gmane