tato konference a archiv gmane.org

Chtel jsem se jen zeptat, zda-li tato konference
a gmane.org archive teto konference
http://dir.gmane.org/gmane.linux.gentoo.user.czech-slovak
stale jeste v pouzivani.

pk

Náhrada za VMware server

          Zdravím,
před pár dny jsem byl donucený přeinstalovat svůj domácí server. A 
zjistil jsem že vmware server není mezi ebuildy. A jak jsem později 
zjistil nejspíš proto, že ho vmware přestalo nadále podporovat. Měl jsem 
na něm virtuální stroj s Windows, kvůli tiskárně připojené k serveru (ta 
má ovladače pouze na Windows :( ). Nevíte čím by se vmware server dal 
nahradit, aby o mělo podobné vlastnosti (dálková zpráva bez výstupu na 
lokální monitor)? VMware Workstation sice už má dálkovou zprávu, ale je 
placený.

               Dík za odpověď

                        Vítězslav Kašička

Odchozí zpráva neobsahuje viry.
Zkontrolováno AVG - www.avg.cz 
Verze: 9.0.920 / Virová báze: 271.1.1/3978 - Datum vydání: 10/27/11 08:35:00

Support sent you a message: Special Offer

Start OpenLDAP

   Zdraví,
zkoušel jsem si nakonfigurovat OpenLDAP jako databázi uživatelů. Problém 
je že při startu serveru trvá dlouho než se spustí. Podle logu se snaží 
přes nss_ldap dostat na server který se spouští:
slapd[23343]:  <at> (#) $OpenLDAP: slapd 2.4.19 (May 29 2010 00:05:41) $
slapd[23343]: nss_ldap: failed to bind to LDAP server ldap://127.0.0.1: 
Can't contact LDAP server
slapd[23343]: nss_ldap: failed to bind to LDAP server ldap://127.0.0.1: 
Can't contact LDAP server
slapd[23343]: nss_ldap: reconnecting to LDAP server (sleeping 1 seconds)...
slapd[23343]: nss_ldap: failed to bind to LDAP server ldap://127.0.0.1: 
Can't contact LDAP server
slapd[23343]: nss_ldap: reconnecting to LDAP server (sleeping 2 seconds)...
	.
	.
slapd[23343]: nss_ldap: could not search LDAP server - Server is unavailable
slapd[23343]: auxpropfunc error invalid parameter supplied
slapd[23343]: _sasl_plugin_load failed on sasl_auxprop_plug_init for 
plugin: ldapdb

   A při tom mám nastavený v nsswitch.conf napřed files před ldap:
passwd:      files ldap
shadow:      files
group:       files ldap

Odchozí zpráva neobsahuje viry.
Zkontrolováno AVG - www.avg.cz 
Verze: 9.0.819 / Virová báze: 271.1.1/2903 - Datum vydání: 05/29/10 08:25:00

Your Order with Amazon.com (4368-094748-6050636)

Gentoo,Slax: xorg.conf na monitoru viewsonic (1440x900)

Zdravim,

graficka AGP 8x karta (GeForce FX5200) mne v pc zlobi (s ni vse
puvodne fungovalo spravne) a tak jsem si rikal, ze vyuziji stavajici
VGA on board (00:02.0 VGA compatible controller: Intel Corporation
82865G Integrated Graphics Controller (rev 02). Generoval jsem si
pomocí xorgcfg, xorgconfig i X -configure konfiguracni soubor
xorg.conf pro vesa i pro intel vga (pro xorg se da pouzit "intel"
driver). Pokud jsem restartoval xdm s kdm, tak je cely obraz pouze s
rozlisenim 1024x768 a je zarovnany k pravemu okraji monitoru. Na leve
strane je cerny pruh 416 (1440-1024) pixelu.. Dival jsem se, ze mam
nainstalovany inter i vesa driver:

pc-doma ~ # qlist -I vesa intel
x11-drivers/xf86-video-intel
x11-drivers/xf86-video-vesa

pc-doma ~ # emerge -pv xorg-server

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R   ] x11-base/xorg-server-1.3.0.0-r6  USE="dri nptl sdl
xorg -3dfx -debug -dmx -ipv6 -kdrive -minimal -xprint"
INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron
-digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit
-hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax
-penmount -spaceorb -summa -synaptics -tek4957 -ur98 -vmmouse -void
-wacom" VIDEO_CARDS="intel nv nvidia radeon vesa -apm -ark -chips
-cirrus -cyrix -dummy -epson -fbdev -fglrx -glint -i128 -i740
(-impact) -imstt -mach64 -mga -neomagic (-newport) -nsc -r128
-rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2)
(-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx
-tga -trident -tseng -v4l -vga -via -vmware -voodoo" 0 kB

pc-doma ~ # emerge --info
Portage 2.1.6.4 (default/linux/x86/2008.0, gcc-4.1.2, glibc-2.6.1-r0,
2.6.28-gentoo-pp01 i686)
=================================================================
System uname: Linux-2.6.28-gentoo-pp01-i686-Intel-R-_Celeron-R-_CPU_2.70GHz-with-glibc2.0
Timestamp of tree: Fri, 06 Feb 2009 08:00:01 +0000
distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port
3632) [enabled]
app-shells/bash:     3.2_p39
dev-lang/python:     2.5.2-r7
dev-python/pycrypto: 2.0.1-r6
dev-util/cmake:      2.4.6-r1
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.13, 2.63
sys-devel/automake:  1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.2
sys-devel/binutils:  2.18-r3
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.26
virtual/os-headers:  2.6.23-r3
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config
/usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
/etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo
/etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="buildpkg distcc distlocks fixpackages parallel-fetch
protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org
http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LANG="cs_CZ"
LC_ALL="cs_CZ"
LDFLAGS="-Wl,-O1"
LINGUAS="cs en"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--compress --force --whole-file --delete --stats --timeout=180
--exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X a52 aac accessibility acl acpi alsa arts berkdb bzip2 cdr cli
cracklib crypt cups dbus dri dvd dvdr dvdread encode examples exif
firefox flac fortran ftp gdbm gif gimp gpm gtk hal iconv isdnlog jpeg
jpg kde kdeenablefinal lame lm_sensors maildir midi mjpeg mp3 mpeg
mplayer mudflap nagios-ping nagios-ssh ncurses nls nptl nptlonly ogg
opengl openmp pam parport pcre pdf perl png ppds pppd python qt3
quicktime readline reflection sdl session shout slang spl srt ssl
sysfs tcpd theora tiff truetype trutype unicode utempter vcd vorbis
win32codecs wma wmv x86 xinerama xml xorg xvid zlib"
ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci
emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel
intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem
ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop
empty extplug file hooks iec958 ioplug ladspa lfloat linear meter
mmap_emul mulaw multi null plug rate route share shm softvol"
APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon
authn_dbm authn_default authn_file authz_dbm authz_default
authz_groupfile authz_host authz_owner authz_user autoindex cache dav
dav_fs dav_lock deflate dir disk_cache env expires ext_filter
file_cache filter headers include info log_config logio mem_cache mime
mime_magic negotiation rewrite setenvif speling status unique_id
userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard
mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780
lb216 lcdm001 mtxorb ncurses text" LINGUAS="cs en" USERLAND="GNU"
VIDEO_CARDS="intel nvidia nv radeon vesa joystick"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK,
PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS,
PORTDIR_OVERLAY

Nezjistil jsem, co je pricinou, ze nyni nejsem schopen v gentoo s
Intel VGA nastavit rozliseni monitoru 1440x900. Grafika se mi jevi
pomala i oproti slaxu.

Zkousel jsem obycejny slax (live CD) posledni verze a u nej se
detekuje intel a rozliseni v xorg-u je naprosto v poradku 1400x900.
Napada vas, kde nechal tesar diru?

diky za radu

------------------------------
Petr Podrabsky

Kompilace Gentoo neprojde dal pres cpio??

Ahoj,

u testovaciho pc (gentoo) jsem zkousel zamenit portage (/usr/portage)
za portage z www.funtoo.org. Pak jsem funtoo portage vymazal a pomoci
emerge --sync jsem si syncnul portage z gentoo. Od te doby mam problem
zkompilovat cely system znovu (viz. vypis nize). Jak bych mohl system
opravit?

diky za podnety

-- 
------------------------------
Petr

pklfkl-2 ~ # emerge --info
Portage 2.1.6.4 (arch/x86, gcc-4.1.2, glibc-2.6.1-r0,
2.6.23-gentoo-r9-pp03 i686)
=================================================================
System uname: Linux-2.6.23-gentoo-r9-pp03-i686-Intel-R-_Celeron-TM-_CPU_1200MHz-with-glibc2.0
Timestamp of tree: Mon, 05 Jan 2009 22:05:01 +0000
distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port
3632) [disabled]
ccache version 2.4 [enabled]
app-shells/bash:     3.2_p39
dev-lang/python:     2.5.2-r7
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache:     2.4-r7
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.13, 2.61-r2
sys-devel/automake:  1.5, 1.9.6-r2, 1.10.1-r1
sys-devel/binutils:  2.18-r3
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.26
virtual/os-headers:  2.6.27-r2
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
/etc/fonts/fonts.conf /etc/php/apache2-php5/ext-active/
/etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/
/etc/revdep-rebuild /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"

pklfkl-2 ~ #
Kompilace „emerge –u –deep –newuse world" mi skonci chybou:

/usr/lib/portage/bin/ecompressdir: line 31: xargs: command not found
/usr/lib/portage/bin/ecompressdir: line 29: find: command not found
/usr/lib/portage/bin/ecompressdir: line 32: find: command not found
/usr/lib/portage/bin/ecompressdir: line 32: xargs: command not found
/usr/lib/portage/bin/ecompress: line 56: find: command not found
/usr/lib/portage/bin/ecompress: line 58: xargs: command not found
/usr/lib/portage/bin/ecompress: line 59: find: command not found
/usr/lib/portage/bin/ecompress: line 59: xargs: command not found
/usr/lib/portage/bin/misc-functions.sh: line 44: find: command not found
/usr/lib/portage/bin/misc-functions.sh: line 260: find: command not found
/usr/lib/portage/bin/misc-functions.sh: line 423: find: command not found
>>> Done.

>>> Installing sys-apps/sed-4.1.5-r1
 * This package will overwrite one or more files that may belong to other
 * packages (see list below). You can use a command such as `portageq
 * owners / <filename>` to identify the installed package that owns a
 * file. If portageq reports that only one package owns a file then do
 * NOT file a bug report. A bug report is only useful if it identifies at
 * least two or more packages that are known to install the same file(s).
 * If a collision occurs and you can not explain where the file came from
 * then you should simply ignore the collision since there is not enough
 * information to determine if a real problem exists. Please do NOT file
 * a bug report at http://bugs.gentoo.org unless you report exactly which
 * two packages install the same file(s). Once again, please do NOT file
 * a bug report unless you have completely understood the above message.
 *
 * Detected file collision(s):
 *
 *      /usr/share/info.ecompress.dir
 *
 * Searching all installed packages for file collisions...
 *
 * Press Ctrl-C to Stop
 *
 * app-arch/cpio-2.9-r1
 *      /usr/share/info.ecompress.dir
 *
 * Package 'sys-apps/sed-4.1.5-r1' NOT merged due to file collisions. If
 * necessary, refer to your elog messages for the whole content of the
 * above message.

>>> Failed to install sys-apps/sed-4.1.5-r1, Log file:

>>>  '/var/tmp/portage/sys-apps/sed-4.1.5-r1/temp/build.log'

 * Messages for package sys-apps/sed-4.1.5-r1:

 * This package will overwrite one or more files that may belong to other
 * packages (see list below). You can use a command such as `portageq
 * owners / <filename>` to identify the installed package that owns a
 * file. If portageq reports that only one package owns a file then do
 * NOT file a bug report. A bug report is only useful if it identifies at
 * least two or more packages that are known to install the same file(s).
 * If a collision occurs and you can not explain where the file came from
 * then you should simply ignore the collision since there is not enough
 * information to determine if a real problem exists. Please do NOT file
 * a bug report at http://bugs.gentoo.org unless you report exactly which
 * two packages install the same file(s). Once again, please do NOT file
 * a bug report unless you have completely understood the above message.
 *
 * Detected file collision(s):
 *
 *      /usr/share/info.ecompress.dir
 *
 * Searching all installed packages for file collisions...
 *
 * Press Ctrl-C to Stop
 *
 * app-arch/cpio-2.9-r1
 *      /usr/share/info.ecompress.dir
 *
 * Package 'sys-apps/sed-4.1.5-r1' NOT merged due to file collisions. If
 * necessary, refer to your elog messages for the whole content of the
 * above message.

Identifikace grafiky

     Zdravím konferenci,
pokouším se nainstalovat Gentoo na počítač s základní deskou ASUS K8N-E 
(CPU AMD Athlon64 a čipset nForce3,) a grafikou Shapphire X1650Pro, ale 
při pokusu o automatickou konfiguraci X serveru mi to nahlásí chybu, že 
zařízení nenalezeno. Tak to dopadne pokud se pokusím konfigurovat ručně 
a následně spustím X-ka. Pak jsem zkusil spustit Ubuntu a ten jel v 
pořádku. Zjistil jsem, že rozdíl je v tom jak se karta ohlásí do 
systému. Při použití příkazu lspci mi pod Gentoo nahlásí toto:
01:00.0 VGA compatible controler:ATI Technologies Inc Device 71c1 (rev 9e)
01:00.1 Display controler:ATI Technologies Inc 71e1(rev9e)

  A na Ubuntu mi hlásí toto:
01:00.0 VGA compatible controler:ATI Technologies Inc Radeon X1650 Pro 
(rev 9e)
01:00.1 Display controler:ATI Technologies Inc Radeon X1650 Pro 
(Secondary)(rev9e)

  Můžete mně poradit, kde by mohla být chyba, případně nasměrovat 
správným směrem?

                                V.Kašička

Okno applikace na full screen pri dvouch monitorech

Cau lidi,

nejak se mi nedari vyresit problem s maximalizaci okna kdyz mam dva monitory.
Porad mi to hazi na oba dva monitory misto na jeden.
Pouzivam kde 3.5.9 konfigurace xorg 1.4.0.90  stejna jako u ubuntu kde to
funguje.
Pouzivam xrandr --output TMDS-1 --auto --left-of LVDS coz funguje spravne.

Kde me vydi jen jednu screenu nevite kde by mohl bejt problem?
Asi nejaky "USE" ale nemam potuchu jaky a pro co.
Na googlu sem nic nenasel.

Jinak hw  intel  GM965/GL960 a 2 x monitor  1680*1050.

Dik
Michal

--

-- 
gentoo-user-cs@... mailing list

virualizace, jak si nerozhodit funkcni system

Zdravim vespolek,

rad bych si zachoval funkcni system a vyzkousel si vytvorit jiny
system na stejnem disku na stejne partition. Nechci delit disk na
dalsi partitiony. Tak jsem dospel k tomu, ze budu potreboval nad
stavajicim gentoo dalsi virtualni linux. Dival jsem sem ze existuji
ruzne virtualizacni nastroje Xen, OpenVZ, KVM. Jak mate s nimi
zkusenosti?

-- 
------------------------------
Petr Podrabsky
--

-- 
gentoo-user-cs@... mailing list

m-audio ice1724 & envy24control & digital out

Ahoj,
zkousim rozbehat
http://www.m-audio.com/products/en_us/Revolution71-main.html
zakladni podpora - driver v jadre - snd-ice-1724
http://bugtrack.alsa-project.org/main/index.php/Matrix:Module-ice1724
beha ok.
Pri hlubsim zkoumani
http://www.abclinuxu.cz/blog/dustin/2007/4/jednoduchy-vu-meter-pro-ice1724
zatim podporu ice1724 v envy24control / kenvy24gui nevidno
http://bugtrack.alsa-project.org/main/index.php/Matrix:Module-ice1724

nevite, jak podpora pokracuje?

ladA
--

-- 
gentoo-user-cs@... mailing list