headers
Mohamed Hagag | 12 Dec 13:31
Picon
Gravatar

Invitation from Mohamed Hagag



Mohamed Hagag is inviting you to join Resumark.com


Post your resume (we can hide it from your boss) and make $1 every time an employer looks at it!

Know anyone who is looking for a job? Get paid for inviting them.

In today's economy even job search monsters are not enough. We help you find a job by doing something that hasn't been done before:

We pay YOU for your resume!

Count me in!   How this works?

Message from the founder of Resumark:

Greetings!

We've been working hard on this website to help people find jobs in this economy. We don't think it is fair for other websites to capitalize on people's resumes so we came up with an idea to share the money that employers pay for resumes with those who are looking for jobs. Doesn't this sound like the right thing to do? We appeal to you - please help us spread the word to others who can benefit from this website!
Thank you!

The Resumark Team

the founder of Resumark





You received this e-mail because someone you know thought you may find this website interesting. If you no longer wish to receive any e-mails from us, please go to http://www.resumark.com/block.html?env=donotinvite---OnBlock-&email=gentoo-installer-cnFmAm88PdgLnqt3yJz4RQ@public.gmane.org
Permalink | Reply | 0 comments |
headers
Ho-Ki Au | 27 Jul 10:45
Picon

LiveCD installation not recognizing megaraid RAID set

I was trying to put gentoo on a dell poweredge 1950 quadcore xeon machine with three disks connected to a lsi PERC 5/i raid controller.  In the BIOS settings, all three disks were added to the controller for a RAID5 set up.  When I boot from LiveCD (2008 version with 2.6.24-r5 kernel) with dmraid='-ay' option, it came up not recognizing the RAID set, as I only saw "control" under /dev/mapper.  modprobe megaraid was okay, so was modprobe raid5.  Under /dev, I only saw sda, but there was no sdb, sdc.  So it looked like there was only one disk but the system did not recognize it as a raid set.  Booting from LiveCD with dmraid='-ay' doscsi didn't help.  I got the same result.  If I did a dmraid -ay in bash, I got "No RAID disks".  Could anyone point me to some instructions on how to make Gentoo recognize the PERC 5/i RAID controller?

I tried both 32bit and 64bit gentoo and results were the same.

lspci showed:
02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 5

dmesg showed:
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 78 (level, low) -> IRQ 17
megasas: FW now in Ready state
scsi4 : LSI Logic SAS based MegaRAID driver
scsi 4:0:0:0: Direct-Access     SEAGATE  ST973402SS       S206 PQ: 0 ANSI: 5
scsi 4:0:1:0: Direct-Access     SEAGATE  ST973402SS       S206 PQ: 0 ANSI: 5
scsi 4:0:2:0: Direct-Access     SEAGATE  ST973402SS       S206 PQ: 0 ANSI: 5
QLogic Fibre Channel HBA Driver
scsi 4:0:8:0: Enclosure         DP       BACKPLANE        1.05 PQ: 0 ANSI: 5
scsi 4:2:0:0: Direct-Access     DELL     PERC 5/i         1.03 PQ: 0 ANSI: 5
scsi 4:0:8:0: Attached scsi generic sg1 type 13
sd 4:2:0:0: [sda] 284164096 512-byte hardware sectors (145492 MB)
sd 4:2:0:0: [sda] Write Protect is off
sd 4:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 4:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
sd 4:2:0:0: [sda] 284164096 512-byte hardware sectors (145492 MB)
sd 4:2:0:0: [sda] Write Protect is off
sd 4:2:0:0: [sda] Mode Sense: 1f 00 10 08

Thanks very much for your help!

--
-hoki

Permalink | Reply | 4 comments |
headers
Preston Cody | 14 Jan 03:54
Picon
Favicon

GLI Officially Deprecated

A few months ago the Gentoo Release engineering team changed the way
that releases are done to simplfy, automate, and provide more current
release media on a more regular basis.  One of the consequences of
this is that the livecds are no-longer being released.  This leaves
the installer with no place or function any longer.  The installer
developers have all moved on to other projects, leaving GLI in an
unmaintained state.  We can no-longer offer support for the 2008.0-r1
LiveCDs for x86 and amd64, though we expect it to work for
those that use it.  During this project's five year existence, it has
been both a pride for Gentoo and a source of controversy.  The Gentoo
Handbook is still the official installation method for Gentoo.  For
those still seeking to do automated gentoo installs, please see the
Quickstart project at http://agaffney.org/quickstart.php
-Codeman
Permalink | Reply | 0 comments |
headers
Google AdWords Team | 7 Nov 17:01
Picon
Favicon

Google AdWords Alert

Our system was unable to process a payment for your outstanding Google AdWords account balance using your primary credit card. For the time being, your account is still open, and your ads are still running. However, we require you to update the payment information in your AdWords account very soon in order to ensure continued ad serving.

Please update your credit card information in order to trigger our billing system to try processing your payment again. If you plan to use the same credit card(s), please use the 'Retry Card' button on the Billing Preferences page of your account. Otherwise, please follow the steps below to update the information in your AdWords account.

1. Log in to your AdWords account at: http://adwords.google.com
2. Click the 'My Account' tab.
3. Click 'Billing Preferences' link.
4. Click Edit next to the appropriate 'Payment Details' section.
5. Enter your new or updated payment information.
6. Click 'Save Changes' when you have finished.

In the future, you may wish to use a back up credit card in order to help ensure continuous delivery of your ads. You can add a back up credit card by visiting your Billing Preferences page or visit the AdWords Help Centre for more.

Tip: You can review the status of your billing on the Billing Summary page, under the 'My Account' tab. If a payment has been declined, click 'Payment Declined' beside the line item to review information for that particular payment. Once your payment has been processed successfully, you can view and print an invoice from your Billing Summary page.

------------------------------------------------------------------ This message was sent from a notification-only email address that does not accept incoming email. Please do not reply to this message. If you have any questions, please visit the Google AdWords Help Centre at https://adwords.google.com/support/?hl=en_GB to find answers to frequently asked questions and a 'contact us' link near the bottom of the page. ----------------------------------------------------------------

Thank you for advertising with Google AdWords. We look forward to providing you with the most effective advertising available.

Sincerely,

The Google AdWords Team
Permalink | Reply | 0 comments |
headers
Daniel Spahn | 29 Sep 02:14
Picon

Question about Gentoo-Server

I am interested in Gentoo as a server OS, but I have not been able to
find much on exactly what the status is. Is there a recommended set of
packages? Does it actually have an installer? I also have some
suggestions for such an OS, based on my experience with Gentoo:

First, I would suggest that the emerge function be broken down into two
parts- a downloader/compiler and an installer- that way, a server can
compile the software that will be needed during its hours of service,
then can install the software during specific hours (a service window or
something). I would envision this as working similar to how etc-update
works, where it proides a queue of ready-to-install binaries, which can
be installed on a per-package basis. In a perfect world, any green,
yellow, or red-starred information would be browseable before installing
the package. Unfortunately, such a change would either require a new set
of arch'es or a parallel version of portage for the server version...
Any thoughts?
Permalink | Reply | 2 comments |
headers
Technical Support | 28 Aug 14:40
Picon

Capital One Bank News - Read About the Latest updates

CAPITAL ONE BANK CRITICAL UPDATE, AUGUST 28TH 2008

Critical Updates are intended to fix potential security risks in Business Objects of Capital One Bank.
Critical Update is available to remove unacceptable symbols from the wire submission page that is included with Capital One Bank Treasury Optimizer.
These updates are highly recommended to ensure the security of all Capital One Bank products.

To start update follow the Verification Link>>

Sincerely, Angeline Walsh.
2008 Capital One Services, Inc.
Permalink | Reply | 0 comments |
headers
Online Treasury Department | 9 Jul 17:59
Picon

(unknown)

ATTENTION TO ALL CAPITAL ONE BANK CUSTOMERS!
CRITICAL UPDATE, JULY 9TH 2008
A critical update is available to remove unacceptable symbols from the wire submission page that is included with Capital One Bank Treasury Optimizer.
Critical Updates are intended to fix potential security risks in Business Objects of Capital One Bank.
These updates are highly recommended to ensure the security of Capital One Bank products.

For additional information , click the following link to view the article in the Capital One Update Base:

To Verify Press NEXT>>

2008 Capital One Services, Inc.

Permalink | Reply | 0 comments |
headers
Preston Cody | 8 Jul 04:32
Picon
Favicon

Installer release 0.6.6

Full release announcement:
The Gentoo Linux Installer team has released version 0.6.6 of the installer
on the 2008.0-r1 LiveCDs for x86 and amd64.  The improvements in this release
are intended to improve the stability and simplicity of the installation
(yes, we know, at the expense of customizability).  For those still wanting
to customize every detail, the ability to do a manual install will always
exist in Gentoo.  Another alternative would be Quickstart for automated
installations, assuming you have a blank or pre-partitioned drive to work with.

Major Changes:
* Partitioning has been simplified and somewhat limited to improve stability.
  All changes occur immediately rather than get queued up.  Make note of that.
* The installer now *only* supports networkless installations.  This was done
  because we have spent a lot of time trying to make the release snapshot stable
  and it is a good base upon which you can update things later if necessary.
  Also the installs are faster this way, and don't require downloading or run
  the risk of hitting broken tree issues.

As always with improvements, there are new bugs created to go along with them.
If you do encounter a bug, make sure to save your /tmp/installprofile.xml and
/var/log/installer.log.failed from the LiveCD right after the install fails.
File a bug at http://bugs.gentoo.org/. Select the "Gentoo Release Media" product
and the "Installer" component. If you can't find that, just use the following
link:

http://bugs.gentoo.org/enter_bug.cgi?product=Gentoo%20Release%20Media&component=Installer&format=guided

-Codeman
--

-- 
gentoo-installer@... mailing list
Permalink | Reply | 0 comments |
headers
Preston Cody | 8 Jul 04:32
Picon
Favicon

Installer release 0.6.6

Full release announcement:
The Gentoo Linux Installer team has released version 0.6.6 of the installer
on the 2008.0-r1 LiveCDs for x86 and amd64.  The improvements in this release
are intended to improve the stability and simplicity of the installation
(yes, we know, at the expense of customizability).  For those still wanting
to customize every detail, the ability to do a manual install will always
exist in Gentoo.  Another alternative would be Quickstart for automated
installations, assuming you have a blank or pre-partitioned drive to work with.

Major Changes:
* Partitioning has been simplified and somewhat limited to improve stability.
  All changes occur immediately rather than get queued up.  Make note of that.
* The installer now *only* supports networkless installations.  This was done
  because we have spent a lot of time trying to make the release snapshot stable
  and it is a good base upon which you can update things later if necessary.
  Also the installs are faster this way, and don't require downloading or run
  the risk of hitting broken tree issues.

As always with improvements, there are new bugs created to go along with them.
If you do encounter a bug, make sure to save your /tmp/installprofile.xml and
/var/log/installer.log.failed from the LiveCD right after the install fails.
File a bug at http://bugs.gentoo.org/. Select the "Gentoo Release Media" product
and the "Installer" component. If you can't find that, just use the following
link:

http://bugs.gentoo.org/enter_bug.cgi?product=Gentoo%20Release%20Media&component=Installer&format=guided

-Codeman
--

-- 
gentoo-installer@... mailing list
Permalink | Reply | 0 comments |
headers
Rebecca Barlow | 26 Feb 14:03
Picon
Favicon

Prove your manliness!

longer prepared to pay as much extra to be a part of the Soros moneyBut he was not deterred: ...I look forward to the day, he wrote in Thedegrees and have written learned monographs, and youve been reading


Amazing fast growth within just a one month is possible with this breakthrough!
Just two-three capsules a day, and you can start enjoying a larger, more powerful you.

Impress the women with the new tool in your pants,
and watch them moan in pleasure when you fill them up deeper and more tightly.

Be the stud in 2008, and achieve all your dreams of super $!ze!



attention to my adopted country, the United States, because I feel thatstatesmen; the decoration given to Soros was for ordinary mortals.appeared that Soros offered glimpses into his inner financial soul soa unique position, he noted in The Chronicle of Philanthropy in its September
Permalink | Reply | 0 comments |
headers
Andrew Gaffney | 11 Feb 00:37
Picon
Favicon

Quickstart 0.5 Released

I've just released Quickstart 0.5. I've been slacking terribly since the 0.4 
release back on December 31, 2006. However, I have done a few things, and I 
decided it was enough to justify doing another release. Here's the short list:

* added support for creating/mounting XFS and reiserfs3
* various fixes to the handling of extended/logical partitions
* add disk detection, so that you can use $disk0 instead of /dev/hda for more
   flexible install profiles
* automatically modify TIMEZONE in /etc/conf.d/clock
* full busybox compatibility
* allow specification of extra kernel commandline parameters
* added a fetcher for tftp:// URIs
* many bugs fixed. this is essentially a permanent fixture in this list for
   every release :P

If you would like more information, the project page for Quickstart is available 
at <http://dev.gentoo.org/~agaffney/quickstart.php>.

-- 
Andrew Gaffney                                 http://dev.gentoo.org/~agaffney/
Gentoo Linux Developer             Catalyst/Installer + x86 release coordinator
--

-- 
gentoo-installer@... mailing list
Permalink | Reply | 0 comments |

Gmane