AuthenTec AES1660 (08ff:168b)

Hi all,
I'm new in this mailing-list. I have a Toshiba Tecra S11-M15 with the
following device:

$ lsusb | grep -i auth
Bus 001 Device 003: ID 08ff:168b AuthenTec, Inc.

I'm a Fedora user, this is my environment

$ uname -r
2.6.35.13-92.fc14.x86_64
$ rpm -q libfprint
libfprint-0.3.0-1.fc14.x86_64

According with the manufacturer
(http://support.authentec.com/KnowledgeBase/KBview/tabid/843/ArticleId/299/Identifying-your-Fingerprint-Sensor-Model.aspx)
this is a AES1660 sensor. Is there any way to make it working with
libfprint?

Regards,
Massimiliano

Building libfprint on Windows

_______________________________________________
fprint mailing list
fprint <at> lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/fprint

Re: AuthenTec AES1660 (08ff:168b)

Hi,

I started working on deciphering the protocol for my AES1660 (identified by 08ff:1680) few months ago. I
didn't have time for that lately, but I am planning to get back to work. However if somebody wants to finish
it, I can give him all the information I explored about the protocol.

Massi, you are the first one who has different sensor with AES1660 chip. I am very interested in the logs for
your sensor to see the protocol differences between this two devices. Please read Fprint wiki and make the
logs of the protocol in action.

> ------------ Původní zpráva ------------
> Od: Massi Ergosum <massi.ergosum <at> gmail.com>
> Předmět: [fprint] AuthenTec AES1660 (08ff:168b)
> Datum: 06.8.2011 15:35:38
> ----------------------------------------
> Hi all,
> I'm new in this mailing-list. I have a Toshiba Tecra S11-M15 with the
> following device:
> 
> $ lsusb | grep -i auth
> Bus 001 Device 003: ID 08ff:168b AuthenTec, Inc.
> 
> I'm a Fedora user, this is my environment
> 
> $ uname -r
> 2.6.35.13-92.fc14.x86_64
> $ rpm -q libfprint
> libfprint-0.3.0-1.fc14.x86_64
> 
> According with the manufacturer
> (http://support.authentec.com/KnowledgeBase/KBview/tabid/843/ArticleId/299/Identifying-your-Fingerprint-Sensor-Model.aspx)
> this is a AES1660 sensor. Is there any way to make it working with
> libfprint?
> 
> Regards,
> Massimiliano
> _______________________________________________
> fprint mailing list
> fprint <at> lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/fprint
> 
> 
> 

Petr Dlouhý
petr.dlouhy <at> email.cz

AuthenTec AES2660, 08ff:2683

Hi,

does anybody work on the new AES2660 (08ff:2683) Sensor? On my new notebook I have this device. How could I help?

Thanks,
Michael

_______________________________________________
fprint mailing list
fprint <at> lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/fprint

openembedded & bitbake

Hi, I'm trying to cross compile libfprint/fprint for an arm processor,
but I'm having some trouble.

Has anyone used openembedded and bitbake to cross compile it before
who could offer some advice or recipes?

 - Brent

Re: translations from transifex

В Sun, 29 May 2011 09:07:40 +0400
Yuri Kozlov <yuray <at> komyakino.ru> пишет:

> Somebody can to push a translations from tx to git (e.g. Russian)?

Ping!

--

-- 
Best Regards,
Yuri Kozlov

_______________________________________________
fprint mailing list
fprint <at> lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/fprint

Re: translations from transifex

On Monday 15 August 2011 20:53:26 Yuri Kozlov wrote:
> В Sun, 29 May 2011 09:07:40 +0400
> 
> Yuri Kozlov <yuray <at> komyakino.ru> пишет:
> > Somebody can to push a translations from tx to git (e.g. Russian)?
> 
> Ping!

Please send your patches to the list, they'll be reviewed and eventually 
merged.

Regards
Vasily
_______________________________________________
fprint mailing list
fprint <at> lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/fprint

Re: translations from transifex

On Mon, 2011-08-15 at 21:53 +0400, Yuri Kozlov wrote:
> В Sun, 29 May 2011 09:07:40 +0400
> Yuri Kozlov <yuray <at> komyakino.ru> пишет:
> 
> > Somebody can to push a translations from tx to git (e.g. Russian)?

Yes.

> Ping!

In the future, it'll just have to wait until we do a release though.

Cheers

_______________________________________________
fprint mailing list
fprint <at> lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/fprint

Re: translations from transifex

On Mon, 2011-08-15 at 23:55 +0300, Vasily Khoruzhick wrote:
> On Monday 15 August 2011 20:53:26 Yuri Kozlov wrote:
> > В Sun, 29 May 2011 09:07:40 +0400
> > 
> > Yuri Kozlov <yuray <at> komyakino.ru> пишет:
> > > Somebody can to push a translations from tx to git (e.g. Russian)?
> > 
> > Ping!
> 
> Please send your patches to the list, they'll be reviewed and eventually 
> merged.

No, translations should go through Transifex, as Yuri did.

Cheers

_______________________________________________
fprint mailing list
fprint <at> lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/fprint

Validity VFS Series proprietary driver

Hi all!

Don't know how far development for Validity's devices is. By change I
found a closed-source driver on their page:

http://www.validityinc.com/post.aspx?id=268

The page says it is for VFS 451 and VFS 471 only. I tried to get it run
on my VFS 301 (there should not be too much differences). I think it
checks USB ids so it does not accept my device. So I'll have to do some
-d work ...