Heinz Schuster | 1 Feb 03:00 2008
Picon
Picon

pwmconfig with k8temp

Hello!

Congratulation for this nice program!

But had problems with the pwmconfig configuration.

In my system, the pwm's could not should down.

Then i had changed the line 191 in the pwmconfig file.

from "if [ $? -ne 0 ]"  to "if [ $? -ne 1 ]".

Now, its wunderfull!

I used the Ubuntu 7.10 AMD_64 Version.

My System ist a Asrock AM2NF3-VSTA 
<http://www.asrock.com/mb/overview.asp?Model=AM2NF3-VSTA&s=>

with a AMD Athlon(tm) 64 X2 Dual Core Processor 3600+.

SENSORS:

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
             +32°C
Core1 Temp:
             +35°C

(Continue reading)

Mark M. Hoffman | 1 Feb 03:05 2008

Re: [PATCH] hwmon (w83627ehf) The W83627DHG has 8 VID pins

Hi Jean:

* Jean Delvare <khali <at> linux-fr.org> [2008-01-03 21:22:44 +0100]:
> While the W83627EHF/EHG has only 6 VID pins, the W83627DHG has 8 VID
> pins, to support VRD 11.0. Add support for this.
> 
> Signed-off-by: Jean Delvare <khali <at> linux-fr.org>
> ---
>  Documentation/hwmon/w83627ehf |    5 +++--
>  drivers/hwmon/w83627ehf.c     |   18 ++++++++----------
>  2 files changed, 11 insertions(+), 12 deletions(-)
> 

Applied to hwmon-2.6.git/testing, thanks.

--

-- 
Mark M. Hoffman
mhoffman <at> lightlink.com

_______________________________________________
lm-sensors mailing list
lm-sensors <at> lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Mark M. Hoffman | 1 Feb 03:35 2008

Re: [PATCH 1/3] hwmon: (w83627hf) Enable VBAT monitoring

Hi Jean:

* Jean Delvare <khali <at> linux-fr.org> [2008-01-03 22:54:13 +0100]:
> If VBAT monitoring is disabled, enable it. Bug reported on the
> lm-sensors trac system:
> http://lm-sensors.org/ticket/2282
> This is the exact same patch that was applied to the w83627ehf driver
> 6 months ago.
> 
> Signed-off-by: Jean Delvare <khali <at> linux-fr.org>
> ---
> Carlos, could you please test and/or review this patch?
> 
>  drivers/hwmon/w83627hf.c |    5 +++++
>  1 file changed, 5 insertions(+)

Applied to hwmon-2.6.git/testing, thanks.

--

-- 
Mark M. Hoffman
mhoffman <at> lightlink.com

_______________________________________________
lm-sensors mailing list
lm-sensors <at> lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Mark M. Hoffman | 1 Feb 03:35 2008

Re: [PATCH 2/3] hwmon: (w83627hf) Add individual alarm and beep files

Hi Jean:

* Jean Delvare <khali <at> linux-fr.org> [2008-01-03 23:00:30 +0100]:
> The new libsensors needs these individual alarm and beep files. The
> code was copied from the w83781d driver. I've tested the alarm files
> on a W83627THF. I couldn't test the beep files as the system in
> question doesn't have a speaker.
> 
> Signed-off-by: Jean Delvare <khali <at> linux-fr.org>
> ---
> Carlos, Jim, could any of you please test and/or review this patch?
> 
>  drivers/hwmon/w83627hf.c |  142 +++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 139 insertions(+), 3 deletions(-)

Applied to hwmon-2.6.git/testing, thanks.

--

-- 
Mark M. Hoffman
mhoffman <at> lightlink.com

_______________________________________________
lm-sensors mailing list
lm-sensors <at> lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Mark M. Hoffman | 1 Feb 03:36 2008

Re: [PATCH 3/3] hwmon: (w83627hf) Refactor beep enable handling

Hi Jean:

* Jean Delvare <khali <at> linux-fr.org> [2008-01-03 23:04:55 +0100]:
> We can handle the beep enable bit as any other beep mask bit for
> slightly smaller code.
> 
> Signed-off-by: Jean Delvare <khali <at> linux-fr.org>
> ---
> Carlos, Jim, could any of you please test and/or review this patch?
> 
>  drivers/hwmon/w83627hf.c |   78 +++++++++++++++-------------------------------
>  1 file changed, 26 insertions(+), 52 deletions(-)

Applied to hwmon-2.6.git/testing, thanks.

--

-- 
Mark M. Hoffman
mhoffman <at> lightlink.com

_______________________________________________
lm-sensors mailing list
lm-sensors <at> lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Mark M. Hoffman | 1 Feb 03:52 2008

Re: failed to load it87 module on IT8712F

Hi Peter:

* Peter Eser <Peter.Eser <at> heuft.com> [2008-01-31 16:32:10 +0100]:
>    Hello,
> 
>    I have a Aeeon PCM8120 board with VIA CX700M.
>    On the VIA homepage its equipped with VT1211.
>    But on board I find a (additional?) IT8712F and
>    sensors detect finds only this one and says: (but not activated).
>    modprobe vt1211 and it87 both say no such device.
> 
>    Bus module i2c-viapro has no problem.
>    All is standard kernel 2.6.24.
> 
>    The sad thing is I have the it87 module running under
>    kernel 2.2 (because the board is a replacement for an older
>    one running on this old kernel, by the way this kernel is
>    running fine on the new board). Can modprobe it87 with i2c-isa
>    on the old kernel and get fan,temperatures,voltages.
> 
>    Any help would be great,

Are there any interesting messages in the kernel log when running
2.6.24?  If so, please send them.  Also, please send a copy of your
kernel config.

Thanks & regards,

--

-- 
Mark M. Hoffman
(Continue reading)

Mark M. Hoffman | 1 Feb 04:07 2008

Re: [PATCH 2/3] hwmon: (lm80) De-macro the sysfs callbacks

Hi Jean:

* Jean Delvare <khali <at> linux-fr.org> [2008-01-05 15:37:05 +0100]:
> Use standard dynamic sysfs callbacks instead of macro-generated
> functions. This makes the code more readable, and the binary smaller
> (by about 34%).
> 
> As a side note, another benefit of this type of cleanup is that they
> shrink the build time. For example, this cleanup saves about 29% of
> the lm80 driver build time.
> 
> Signed-off-by: Jean Delvare <khali <at> linux-fr.org>
> ---
> Tested using i2c-stub.
> 
>  drivers/hwmon/lm80.c |  245 ++++++++++++++++++++++----------------------------
>  1 file changed, 111 insertions(+), 134 deletions(-)
> 

Applied to hwmon-2.6.git/testing, thanks.

--

-- 
Mark M. Hoffman
mhoffman <at> lightlink.com

_______________________________________________
lm-sensors mailing list
lm-sensors <at> lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

(Continue reading)

Mark M. Hoffman | 1 Feb 04:07 2008

Re: [PATCH 3/3] hwmon: (lm80) Add individual alarm files

Hi Jean:

* Jean Delvare <khali <at> linux-fr.org> [2008-01-05 15:40:38 +0100]:
> The new libsensors needs these individual alarm files.
> 
> Signed-off-by: Jean Delvare <khali <at> linux-fr.org>
> ---
>  drivers/hwmon/lm80.c |   31 ++++++++++++++++++++++++++++++-
>  1 file changed, 30 insertions(+), 1 deletion(-)

Applied to hwmon-2.6.git/testing, thanks.

--

-- 
Mark M. Hoffman
mhoffman <at> lightlink.com

_______________________________________________
lm-sensors mailing list
lm-sensors <at> lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Mark M. Hoffman | 1 Feb 04:07 2008

Re: [PATCH 1/3] hwmon: (lm80) Various cleanups

Hi Jean:

* Jean Delvare <khali <at> linux-fr.org> [2008-01-05 15:35:09 +0100]:
> * Drop trailing whitespace
> * Fold a long line
> * Rename new_client to client
> * Drop redundant initializations to 0
> * Drop bogus comment
> 
> Signed-off-by: Jean Delvare <khali <at> linux-fr.org>
> ---
> Tested using i2c-stub.
> 
>  drivers/hwmon/lm80.c |   49 ++++++++++++++++++++++++-------------------------
>  1 file changed, 24 insertions(+), 25 deletions(-)
> 

Applied to hwmon-2.6.git/testing, thanks.

--

-- 
Mark M. Hoffman
mhoffman <at> lightlink.com

_______________________________________________
lm-sensors mailing list
lm-sensors <at> lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Juerg Haefliger | 1 Feb 07:42 2008
Picon

[PATCH] lm-sensors: add sch5027 support

This patch adds detection of the SMSC SCH5027 Super-IO to sensors-detect.

Signed-Off-By: Juerg Haefliger <juergh at gmail.com>
_______________________________________________
lm-sensors mailing list
lm-sensors <at> lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Gmane