rick f | 28 Dec 10:33 2011
Picon

how have you been ipw2200-ap-devel <at> lists.sourceforge.net

hey ipw2200-ap-devel <at> lists.sourceforge.net this made a world of difference for me http://www.workathomenewsl0.com

------------------------------------------------------------------------------
Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex
infrastructure or vast IT resources to deliver seamless, secure access to
virtual desktops. With this all-in-one solution, easily deploy virtual 
desktops for less than the cost of PCs and save 60% on VDI infrastructure 
costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox
Karol Kowalik | 9 Feb 17:21 2009
Picon

compiling ipw2200-ap deletes all the source files

Hello,

I have been trying to compile ipw2200-ap-0.2 and ipw2200-ap-0.3 without 
success. Every time I try to do that, the 'make' deletes all the source 
files.

In order to compile the driver I'm using the make with the specific 
kernel sources using:

make KSRC=/opt/pyramid_new/linux-2.6.19.2/linux

and then when I list the files (using ls) I can see that only one 
directory 'net' is left and the other files are deleted. Below I'm 
attaching the details each of my steps.

Could you please let me know what I'm doing wrong?

Many thanks
Karol

[root <at> test ipw2200-ap-0.2]# ls
CHANGES         ieee80211_ap.h          ieee80211_rx.c  ISSUES 
    net                unload
config          ieee80211_crypt.c       ieee80211_tx.c  LICENSE 
    pci
dvals           ieee80211_crypt_ccmp.c  ieee80211_wx.c  load 
    README.ipw2200
FILES           ieee80211_crypt_tkip.c  INSTALL         Makefile 
    README.ipw2200-ap
idvals          ieee80211_crypt_wep.c   ipw2200.c       Makefile.i386 
(Continue reading)

Dirk De Becker | 28 Jan 17:14 2009
Picon

Re: ipw2200-ap status

Hello,

I am also interested in this feature on the ipw2200.
Has anyone contacted intel about this yet?

Kind regards,

Dirk

 > Hello,
 >
 > Iam also waiting for using the card in master  mode, ill monitor ist 
  since 3
 > yeahrs without a change :(
 >
 > Best Regards
 >
 > Andreas
 >
 > -------- Original-Nachricht --------
 > > Datum: Thu, 25 Sep 2008 16:46:01 -1000
 > > Von: "Johnny Tightnuts" <[EMAIL PROTECTED]>
 > > An: ipw2200-ap-devel <at> lists.sourceforge.net
 > > Betreff: [ipw2200-ap-devel] ipw2200-ap status
 >
 > > Hi,
 > >
 > > Is this driver still in active development? Is this list even 
active? Is
 > > there anybody out there?
(Continue reading)

Johnny Tightnuts | 26 Sep 04:46 2008
Picon

ipw2200-ap status

Hi,

Is this driver still in active development? Is this list even active? Is there anybody out there? 

There have been numerous revisions to the 2.6 kernel which make the current ipw2200-ap 0.3 source in dire need of an update. I've also seen a bunch of forums of people wanting to get this module to work in master mode. I have done some kernel module programming before, but I'd rather not reinvent the wheel. Has anyone gotten it work, ever? Last working kernel rev of this module was 2.6.what ?

Anyone wanna help? Would Intel be interested in opening up the firmware in lieu of support?

-JT
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
ipw2200-ap-devel mailing list
ipw2200-ap-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipw2200-ap-devel
Andreas Bartsch | 25 Jan 22:48 2007
Picon
Picon

hello iam new

Hello all together,

is this list still alive?
since 3 days iam fighting with my ipw2200. I want to make an AP for my neighbor.

i use gentoo and atm 2.6.19.2, i hade to change litle things on the ipw2200-ap-0.3. drivers to compile the
modules. but something is not ok. i could load them, but the console hangs if i unload them...

i got no stable (unprotectet!!) connection, my neighbor can just sporadly ping me, but dhcp works fine.

is here any help availeble? or other hints? 
can i use hostapd with ipw2200-ap?
or wpa_supp ? or just iwconfig + OPENvpn?

sorry for my bad english

best regards

Andreas
--

-- 
"Feel free" - 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
Antoni Villalonga | 25 Jan 20:08 2007
Picon

ipw2200 on 2.6.20 unstable

Hi!

I'm using 2.6.20-rc5 (same problem with others rc) and, some times, I
need to unload and reload the module.

It fails (some times) after reboot the computer or resume a suspend to ram.

There are any known bug about it?
Some one with the same problem?

I'm sorry for don't send any debug output, I haven't time these days :-(

Bye guys!!

--

-- 
Antoni Villalonga i Noceras
#Bloc# ~> http://friki.CAT
#Jabber# ~> friki <at> bulmalug.net

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
rick f | 23 Jan 18:54 2007
Picon

Power Management support

(To Intel)
Hello, is there any release planned with support for power management?  
Still looking forward to helping with this important feature.

Thanks in advance,
Rick

_________________________________________________________________
Turn searches into helpful donations. Make your search count. 
http://click4thecause.live.com/search/charity/default.aspx?source=hmemtagline_donation&FORM=WLMTAG

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
逸民 向 | 11 Jan 16:31 2007
Picon

no MAC ip obtained

Dear all :
  I am working an ARM-base embedded linux board and wish to add the AP function to it. This board are SoC which have MAC inside and use another PHY
ethernet controller outside. When i load my ko file of ipw2200-ap, it show error like below :
======================================================
 
egiga0    no wireless extensions.
lo        no wireless extensions.
eth0      IEEE 802.11g  ESSID:"HD-STAREAST-AP1" 
          Mode:Master  Frequency:2.462 GHz  Access Point: 00:00:00:00:00:00  
          Bit Rate=54 Mb/s   Tx-Power=20 dBm   Sensitivity:-80 dBm 
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:28   Missed beacon:0
/share/public/ap # iwconfig eth0 ap 00:12:F0:54:A1:4A
***** FATAL ERROR **************************************************
ipw2200: Firmware error detected.  Restarting.
ipw2200: Start IPW Error Log Dump:
ipw2200: Status: 0x00000221, Config: 00000307
ipw2200: ERROR_FATALSTATUS_ERROR 74293185 0x000162ec  0x00014de8  0x00000a64  0x00015700  0x00000386
ipw2200: ERROR_DMA_STATUS 74293191 0x00026580  0x000264c0  0x01540001  0x00000000  0x00000000
ipw2200: ERROR_DMA_STATUS 74293197 0x00027400  0x000275d0  0x00540001  0x00000000  0x00000001
ipw2200: ERROR_DMA_STATUS 74293202 0x00027000  0x000271f0  0x00540000  0x9c6a4200  0x00000002
ipw2200: ERROR_DMA_STATUS 74293208 0x00408000  0x00408000  0x30408200  0x00000082  0x00000003
***** FATAL ERROR **************************************************
ipw2200: Firmware error detected.  Restarting.
ipw2200: Start IPW Error Log Dump:
ipw2200: Status: 0x00000221, Config: 00000307
ipw2200: ERROR_DMA_STATUS 74798210 0x00027400  0x000275d0  0x00540002  0x00000000  0x00000001
ipw2200: ERROR_DMA_STATUS 74798215 0x00027000  0x000271f0  0x00540002  0x9c6a4200  0x00000002
ipw2200: ERROR_DMA_STATUS 74798221 0x00400000  0x00400000  0x00400200  0x00000082  0x00000003
ipw2200: failed to send ASSOCIATE command
/share/public/ap # Sending channel to 11
Sending channel to 11
notification type = 20 (104 bytes)
/share/public/ap # iwconfig
egiga0    no wireless extensions.
lo        no wireless extensions.
eth0      IEEE 802.11g  ESSID:"HD-STAREAST-AP1" 
          Mode:Master  Frequency:2.462 GHz  Access Point: 00:12:F0:54:A1:4A  
          Bit Rate=54 Mb/s   Tx-Power=20 dBm   Sensitivity:-80 dBm 
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:28   Missed beacon:0
/share/public/ap # eth0: 00:0e:35:dd:a5:6f auth_cb - alg=0 trans#=2 status=0 - STA authenticated
O: 00 00 02 00 00 00
This STA is OFDM
Add station index = 1
eth0: 00:0e:35:dd:a5:6f assoc_cb - STA associated
O: 01 00 00 00 01 C0 01 08 8C 12 18 24 30 48 60 6C
 
======================================================
Does anyone know what's wrong with it ??
My ethernet is still working and the result of iwconfig shows that
my AP interface didn't have MAC address.
Shall i do anything related the ethernet ???
 
Thank you.
 
Shawn.
 
 

抢注雅虎免费邮箱-3.5G容量,20M附件!
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
ipw2200-ap-devel mailing list
ipw2200-ap-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipw2200-ap-devel
Thanh Han The | 4 Nov 15:10 2006
Picon

ipw2200 keeps restarting

Dear list,

I have installed ipw2200-ap (latest version
ipw2200-ap-0.3.tgz + corresponding firmware) in order to
turn my laptop (IBM ThinkPad R50e) into a home AP. It works,
however from time to time it keeps restarting the firmware
randomly. Some relevant messages from dmesg look like this:

,--------
| ***** FATAL ERROR **************************************************
| ipw2200: Firmware error detected.  Restarting.
| ipw2200: Start IPW Error Log Dump:
| ipw2200: Status: 0x000000A0, Config: 00000303
| ipw2200: ERROR_NMI_INTERRUPT 10158198 0x000003bc  0x00000000
0x00000a94  0x00010380  0x00000000
| ipw2200: ERROR_DMA_STATUS 10158204 0x00026320  0x00026830 0x01540000
 0x9ca6006c  0x00000000
| ipw2200: ERROR_DMA_STATUS 10158210 0x00027400  0x00027410 0x00540001
 0x00000000  0x00000001
| ipw2200: ERROR_DMA_STATUS 10158215 0x00027000  0x000271e0 0x00540000
 0x9c6a4200  0x00000002
| ipw2200: ERROR_DMA_STATUS 10158221 0x3004805c  0x00408000 0x30408200
 0x00000080  0x00000003
| ipw2200: device failed to boot initial fw image
| ipw2200: Unable to load firmware: 0xFFFFFFC2
| ipw2200: Failed to up device
`--------

when this happens, unloading the module (by 'modprobe -r ipw2200')
gives:

,--------
| Badness in remove_proc_entry at fs/proc/generic.c:693
| [<c018ec3a>] remove_proc_entry+0x10a/0x150
| [<e04866f8>] ipw2200_proc_cleanup+0x18/0x20 [ipw2200]
| [<c012d444>] sys_delete_module+0x144/0x180
| [<c0153084>] sys_munmap+0x44/0x70
| [<c01030c9>] sysenter_past_esp+0x52/0x75
`--------

and reloading gives:

,--------
| ieee80211_crypt: unregistered algorithm 'NULL' (deinit)
| ieee80211_crypt: registered algorithm 'NULL'
| ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.3
| ipw2200: Copyright(c) 2003-2004 Intel Corporation ACPI: PCI
interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11
| ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
| ipw2200: device failed to boot initial fw image
| ipw2200: Unable to load firmware: 0xFFFFFFC2
| ipw2200: failed to register network device
| ipw2200: probe of 0000:02:02.0 failed with error -5
`--------

Does anyone have a clue how it could be fixed? I am using
debian sarge, with a customized kernel 2.6.11.5.

Thanks for your consideration,
Thanh

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
Rowan Potgieter | 30 Oct 08:52 2006
Picon

failed to send MAC_MODE - patch

hi guys
A while back I had the following error while trying to load the
ipw2200-ap-0.2 drivers in uClinux:

# ifconfig ixp0 down
# insmod /lib/modules/`uname -r`/kernel/net/ipw2200-ap/ieee80211_crypt.ko
# insmod /lib/modules/`uname -r`/kernel/net/ipw2200-ap/ieee80211.ko
# insmod /lib/modules/`uname -r`/kernel/net/ipw2200-ap/ipw2200.ko
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.3
ipw2200: Copyright(c) 2003-2004 Intel Corporation
PCI: enabling device 0000:00:02.0 (0140 -> 0142)
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: failed to send MAC_MODE command
ipw2200: failed to send MAC_MODE command
ipw2200: failed to send MAC_MODE command
ipw2200: failed to send MAC_MODE command
ipw2200: failed to send MAC_MODE command
ipw2200: Unable to initialize device after 5 attempts.
ipw2200: failed to register network device
ipw2200: probe of 0000:00:02.0 failed with error -5

Somebody on the ipw2100 mailing list eventually managed to help me,
apparently its an IRQ number conflict, there was a similar patch
available to fix the problem *temporarily* but I adjusted it to work
with the ipw2200-ap-0.2 driver. I've attached the patch in case
somebody else has a similar problem, it allows you to set an irq when
inserting the module as follows:

insmod /lib/modules/`uname -r`/kernel/net/ipw2200-ap/ipw2200.ko irq=<num>

Just set <num> to some free irq, 28 worked for me.
Hope this helps somebody....
Rowan

-- 
--------------------------------------------------------------------------------------------------------------------------------------------
 When you say 'I wrote a program that crashed Windows', people just
stare at you blankly and say 'Hey, I got those with the system, *for
free*'. (L. Torvalds)
--------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
ipw2200-ap-devel mailing list
ipw2200-ap-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipw2200-ap-devel
rick f | 26 Oct 06:47 2006
Picon

Intel: firmware support for power management?

Hello, is there currently support in the firmware for supporting power 
management?  Specifically:

1. How can the beacon be modified on-the-fly to support broadcasting a 
(D)TIM element?  I tried sending a new beacon template to the firmware but 
it seems to be ignored once the firmware is up and running.
2. Once a STA has requested pending frames via PS-Poll, what is the Tx 
mechanism for sending the frames?  I see that there appears to be a separate 
Tx queue for DTIM; how is this used?
3. What is the meaning of the interrupt status bit 'CX2_INTA_BIT_TX_DTIM'?

I have already coded the support required in the driver:
- queuing frames for 'sleeping' STAs
- transmission of queued frames in response to PS-Poll

However, without support from the firmware, I am unable to complete the 
power management implementation.
Thank you for your excellent work so far; I'm looking forward to completing 
this important missing piece in the AP code.

Thanks,
Rick

_________________________________________________________________
Stay in touch with old friends and meet new ones with Windows Live Spaces 
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

Gmane