gnokii

headers Gabriel Biondo | 1 Jun 2009 19:23 · /sbin/

hi all
has anyone ever used gnokii with a Nokia N96 over a bluetooth connection?

Thanks in advance for the answer

Gabriele

_______________________________________________
gnokii-users mailing list
gnokii-users <at> nongnu.org
http://lists.nongnu.org/mailman/listinfo/gnokii-users

2009/6/4 Shoaib Khan wrote:

> when ever i put some rows in my mysql outbox table and runs smsd command, it
> sends each message twice times. i am also pasting the log for your
> convenience,
>
>>  4 Jun 2009 09:55:48: Sending to 03037659097 unsuccessful. Error Command
>> timed out.
>>  4 Jun 2009 09:56:07: Sending to 03037659097 successful.

you can try to increase smsc_timeout in your gnokiirc

this is from the sample gnokiirc:

# When sending SMS you can experience timeouts. This is the feature of the
# overloaded SMSCs. The phones waits for the response from the SMSC confirming
# that it received the short message. When the SMSC is DoSed with many requests
# it will take more time to get the response. Adjust it to your needs. The
# value is given in seconds to wait. Defaults to 10 seconds. Set to 0 to wait
# forever.
smsc_timeout = 10

--

-- 
Daniele Forsi

Hi!

After a little experimentation, Ubuntu 8.10 and Nokia 3120 classic
started to partially acknowledge each other, but something is still
not right when trying to read an SMS from the phone. Connection is made
by original Nokia CA-126 cable, which, although it seems to not be
mentioned on the Wiki page (http://wiki.gnokii.org/index.php/Cables),
appears to be quite similar to CA-101. Only difference could be that
126 has the small charger plug, since 3120 Classic will not apparently
charge via its USB connector.

So, when plugged in, the corresponding device appears and, as can be
seen, that connects us to the phone. There are messages in phone, one
multimedia (or such, am not totally sure about those), one normal SMS
and even one unread SMS. Plenty to choose from, but when trying to read,
nothing works. Have tried memories ME and SM, locations 0 and 1 (are
those the right ones to try? have not seen any documentation about
memory enumeration practices - only that something should replace
'start'). I think the problems start from --showsmsfolderstatus, which
seems not to find any folders. Am I on right track?

Here we go with the session logs; updating to CVS version was easy, so
went with that - thanks for the CVS upgrade page!

      -- J.

gnokdir$ grep -v '^#' ~/.gnokiirc | grep -v '^$'
[global]
port = /dev/ttyACM0
model = AT
initlength = default
connection = serial
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10
[xgnokii]
allow_breakage = 0
[gnokiid]
bindir = /usr/local/sbin/
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
rlpdebug = off
xdebug = off

gnokdir$ ./gnokii --version
GNOKII Version 0.6.28cvs
Copyright (C) Hugh Blemings <hugh <at> blemings.org>, 1999, 2000
Copyright (C) Pavel Janik ml. <Pavel.Janik <at> suse.cz>, 1999, 2000
Copyright (C) Pavel Machek <pavel <at> ucw.cz>, 2001
Copyright (C) Pawel Kot <gnokii <at> gmail.com>, 2001-2009
Copyright (C) BORBELY Zoltan <bozo <at> andrews.hu>, 2002
Copyright (C) Daniele Forsi <daniele <at> forsi.it>, 2004-2009
gnokii is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
There is absolutely no warranty for gnokii.  See GPL for details.
Built 23:15:37 May 29 2009

gnokdir$ ./gnokii --identify
GNOKII Version 0.6.28cvs
LOG: debug mask is 0x1
Config read from file /home/___/.gnokiirc.
phone instance config:
model = AT
port = /dev/ttyACM0
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyACM0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK
Received message type 00
Message sent: 0x06 / 0x0007
41 54 2b 47 4d 4d 0d                            | AT+GMM
write: [AT+GMM<cr>]
read : [AT+GMM<cr><cr><lf>Nokia 3120 classic<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0023
02 41 54 2b 47 4d 4d 0d 0d 0a 4e 6f 6b 69 61 20 |  AT+GMM   Nokia
33 31 32 30 20 63 6c 61 73 73 69 63 0d 0a 0d 0a | 3120 classic
4f 4b 0d                                        | OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d                         | AT+CGMI
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>Nokia<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0017
02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMI   Nokia
0d 0a 0d 0a 4f 4b 0d                            |     OK
Received message type 06
Message sent: 0x63 / 0x0009
41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?
write: [AT+CSCS?<cr>]
read : [AT+CSCS?<cr><cr><lf>+CSCS: "PCCP437"<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x63 / 0x0023
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCS?   +CSC
53 3a 20 22 50 43 43 50 34 33 37 22 0d 0a 0d 0a | S: "PCCP437"
4f 4b 0d                                        | OK
Received message type 63
Initialisation completed
Message sent: 0x06 / 0x0007
41 54 2b 47 4d 4d 0d                            | AT+GMM
write: [AT+GMM<cr>]
read : [AT+GMM<cr><cr><lf>Nokia 3120 classic<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0023
02 41 54 2b 47 4d 4d 0d 0d 0a 4e 6f 6b 69 61 20 |  AT+GMM   Nokia
33 31 32 30 20 63 6c 61 73 73 69 63 0d 0a 0d 0a | 3120 classic
4f 4b 0d                                        | OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d                         | AT+CGMI
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>Nokia<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0017
02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMI   Nokia
0d 0a 0d 0a 4f 4b 0d                            |     OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 52 0d                         | AT+CGMR
write: [AT+CGMR<cr>]
read : [AT+CGMR<cr><cr><lf>V
09.41<cr><lf>06-11-08<cr><lf>RM-365<cr><lf>(c) Nokia
<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0042
02 41 54 2b 43 47 4d 52 0d 0d 0a 56 20 30 39 2e |  AT+CGMR   V 09.
34 31 0d 0a 30 36 2d 31 31 2d 30 38 0d 0a 52 4d | 41  06-11-08  RM
2d 33 36 35 0d 0a 28 63 29 20 4e 6f 6b 69 61 20 | -365  (c) Nokia
20 20 20 20 20 20 20 20 20 20 20 0d 0a 0d 0a 4f |                O
4b 0d                                           | K
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 53 4e 0d                         | AT+CGSN
write: [AT+CGSN<cr>]
read : [AT+CGSN<cr><cr><lf>355723026815595<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0021
02 41 54 2b 43 47 53 4e 0d 0d 0a __ __ __ __ __ |  AT+CGSN   _____
__ __ __ __ __ __ __ __ __ __ 0d 0a 0d 0a 4f 4b | __________    OK
0d                                              |
Received message type 06
IMEI         : _______________
Manufacturer : Nokia
Model        : Nokia 3120 classic
Product name : Nokia 3120 classic
Revision     : V 09.41
Serial device: closing device

gnokdir$ ./gnokii --showsmsfolderstatus
GNOKII Version 0.6.28cvs
LOG: debug mask is 0x1
Config read from file /home/___/.gnokiirc.
phone instance config:
model = AT
port = /dev/ttyACM0
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyACM0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK
Received message type 00
Message sent: 0x06 / 0x0007
41 54 2b 47 4d 4d 0d                            | AT+GMM
write: [AT+GMM<cr>]
read : [AT+GMM<cr><cr><lf>Nokia 3120 classic<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0023
02 41 54 2b 47 4d 4d 0d 0d 0a 4e 6f 6b 69 61 20 |  AT+GMM   Nokia
33 31 32 30 20 63 6c 61 73 73 69 63 0d 0a 0d 0a | 3120 classic
4f 4b 0d                                        | OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d                         | AT+CGMI
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>Nokia<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0017
02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMI   Nokia
0d 0a 0d 0a 4f 4b 0d                            |     OK
Received message type 06
Message sent: 0x63 / 0x0009
41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?
write: [AT+CSCS?<cr>]
read : [AT+CSCS?<cr><cr><lf>+CSCS: "PCCP437"<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x63 / 0x0023
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCS?   +CSC
53 3a 20 22 50 43 43 50 34 33 37 22 0d 0a 0d 0a | S: "PCCP437"
4f 4b 0d                                        | OK
Received message type 63
Initialisation completed
Message sent: 0x1a / 0x000a
41 54 2b 43 50 4d 53 3d 3f 0d                   | AT+CPMS=?
write: [AT+CPMS=?<cr>]
read : [AT+CPMS=?<cr><cr><lf>+CPMS: (),(),()<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x1a / 0x0023
02 41 54 2b 43 50 4d 53 3d 3f 0d 0d 0a 2b 43 50 |  AT+CPMS=?   +CP
4d 53 3a 20 28 29 2c 28 29 2c 28 29 0d 0a 0d 0a | MS: (),(),()
4f 4b 0d                                        | OK
Received message type 1a
strings[0] =
strings[1] = (null)
strings[2] = (null)
strings[3] = (null)
Ignoring unknown memory type "".
No. Name                                         Id #Msg
========================================================
Serial device: closing device

gnokdir$ ./gnokii --getsms ME 1
GNOKII Version 0.6.28cvs
LOG: debug mask is 0x1
Config read from file /home/___/.gnokiirc.
phone instance config:
model = AT
port = /dev/ttyACM0
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyACM0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK
Received message type 00
Message sent: 0x06 / 0x0007
41 54 2b 47 4d 4d 0d                            | AT+GMM
write: [AT+GMM<cr>]
read : [AT+GMM<cr><cr><lf>Nokia 3120 classic<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0023
02 41 54 2b 47 4d 4d 0d 0d 0a 4e 6f 6b 69 61 20 |  AT+GMM   Nokia
33 31 32 30 20 63 6c 61 73 73 69 63 0d 0a 0d 0a | 3120 classic
4f 4b 0d                                        | OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d                         | AT+CGMI
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>Nokia<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0017
02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMI   Nokia
0d 0a 0d 0a 4f 4b 0d                            |     OK
Received message type 06
Message sent: 0x63 / 0x0009
41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?
write: [AT+CSCS?<cr>]
read : [AT+CSCS?<cr><cr><lf>+CSCS: "PCCP437"<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x63 / 0x0023
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCS?   +CSC
53 3a 20 22 50 43 43 50 34 33 37 22 0d 0a 0d 0a | S: "PCCP437"
4f 4b 0d                                        | OK
Received message type 63
Initialisation completed
Getting message #1 from ME
Message sent: 0x63 / 0x000a
41 54 2b 43 53 43 53 3d 3f 0d                   | AT+CSCS=?
write: [AT+CSCS=?<cr>]
read : [AT+CSCS=?<cr><cr><lf>+CSCS:
("UCS2","GSM","PCCP437","PCDN","IRA","8859-1","HEX")<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x63 / 0x004f
02 41 54 2b 43 53 43 53 3d 3f 0d 0d 0a 2b 43 53 |  AT+CSCS=?   +CS
43 53 3a 20 28 22 55 43 53 32 22 2c 22 47 53 4d | CS: ("UCS2","GSM
22 2c 22 50 43 43 50 34 33 37 22 2c 22 50 43 44 | ","PCCP437","PCD
4e 22 2c 22 49 52 41 22 2c 22 38 38 35 39 2d 31 | N","IRA","8859-1
22 2c 22 48 45 58 22 29 0d 0a 0d 0a 4f 4b 0d    | ","HEX")    OK
Received message type 63
Message sent: 0x00 / 0x000e
41 54 2b 43 53 43 53 3d 22 47 53 4d 22 0d       | AT+CSCS="GSM"
write: [AT+CSCS="GSM"<cr>]
read : [AT+CSCS="GSM"<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0014
02 41 54 2b 43 53 43 53 3d 22 47 53 4d 22 0d 0d |  AT+CSCS="GSM"
0a 4f 4b 0d                                     |  OK
Received message type 00
Message sent: 0x00 / 0x000d
41 54 2b 43 50 4d 53 3d 22 4d 45 22 0d          | AT+CPMS="ME"
write: [AT+CPMS="ME"<cr>]
read : [AT+CPMS="ME"<cr><cr><lf>ERROR<cr><lf>]
Message received: 0x00 / 0x0016
03 41 54 2b 43 50 4d 53 3d 22 4d 45 22 0d 0d 0a |  AT+CPMS="ME"
45 52 52 4f 52 0d                               | ERROR
Received message type 00
GetSMS ME 1 failed! (Unknown error - well better than nothing!!)
Serial device: closing device

before I took the rpm for my suse 64 here:
http://cvs.savannah.nongnu.org/viewcvs/?root=gnokii
now and three days ago it give me error,

An Exception Has Occurred

The root "gnokii" is unknown. If you believe the value is correct, then
please double-check your configuration.
HTTP Response Status

404 Repository not found

is there any problem? or something is changed?
Bye 

Hello,

I have a nokia 2630. It has bluetooth and works with the drivers: AT and 6510.
My use of the phonebook is not restricted to phonenumbers only. I also want 
address information. But neither supports writing the address.

Is there a list in the wiki that describes which driver supports which 
function that I haven't found yet?

Rüdiger

teppisti-xpla wrote:
> before I took the rpm for my suse 64 here:
> http://cvs.savannah.nongnu.org/viewcvs/?root=gnokii
> now and three days ago it give me error,
...
> is there any problem? or something is changed?

Savannah had a major crash.

Feel free to try any of these: 
http://opensource.contentbakery.fi/gnokii/SuSE11.1/

Regards,
Jari Turkia

2009/6/3 John Doe:

> Connection is made
> by original Nokia CA-126 cable, which, although it seems to not be
> mentioned on the Wiki page (http://wiki.gnokii.org/index.php/Cables),

thanks, added to wiki

> I think the problems start from --showsmsfolderstatus, which
> seems not to find any folders. Am I on right track?

yes

> [global]
> port = /dev/ttyACM0
> model = AT
> initlength = default
> connection = serial

the cause is that Nokia didn't implement the AT commands that
--showsmsfolderstatus and --getsms need

try the FBUS driver (you need to have run ./configure with libusb
developer package installed):
port = 1
model = series40
connection = dku2libusb

--

-- 
Daniele Forsi

2009/6/5 Daniele Forsi:

> the cause is that Nokia didn't implement the AT commands ...

Ok, the limited implementation (once again) verified. 

> try the FBUS driver (you need to have run ./configure with libusb
> developer package installed):

Checked and found a package called libusb-dev, version 2:0.1.12-12
installed. Since no new packages have been installed after the last
session, this must have been around when the cvs version was
configured and compiled. I am not too familiar with things going on
under the hood inside these modern Linux systems, but is this how
it should be?

> port = 1
> model = series40
> connection = dku2libusb

.gnokiirc, as modified:

[global]
port = 1
model = series40
initlength = default
connection = dku2libusb
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10
[xgnokii]
allow_breakage = 0
[gnokiid]
bindir = /usr/local/sbin/
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
rlpdebug = off
xdebug = off

gnokdir$ ./gnokii --identify
GNOKII Version 0.6.28cvs
LOG: debug mask is 0x1
Config read from file /home/___/.gnokiirc.
phone instance config:
model = series40
port = 1
connection = dku2libusb
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Connecting
Serial device: opening device USB
Ignoring extra header, type 171, length 5
Found FBUS interface
Couldn't open PHONET device: Operation not permitted
Error in link initialisation: 1
Telephone interface init failed: Command failed.
Quitting.
Command failed.

Not yet there. But why was I trying with the AT model in the
first place? When plugged in, a device called /dev/ttyACM0 got
automatically created. Default .gnokiirc comments that:

> # port = /dev/ttyACM0
> # the last one will work only with AT driver.

Of course there is a little bit of a controversy between this logic
and what FAQ tells us: "model = series40, if you have Nokia
non-Symbian Series60 phone". (By the way, this led to ponderance
of the possibilities for a Series60, but nonetheless non-Symbian
phones to exist.) And, as we can see, the AT model got the phone
to identify in the first place.

So far 1 partial success and 1 better failure. Not bad - we are
proceeding and I still have an operational phone in my possession.
What should or could be done next?

	-- J.

2009/6/6 John Doe:

> Couldn't open PHONET device: Operation not permitted

one way this can be fixed is copying as root
Docs/sample/45-nokiadku2.rules in /etc/udev/rules.d/ and replugging
the phone
I guess this isn't in the docs yet

> But why was I trying with the AT model in the
> first place? When plugged in, a device called /dev/ttyACM0 got
> automatically created. Default .gnokiirc comments that:
>
>> # port = /dev/ttyACM0
>> # the last one will work only with AT driver.

this means that you can use it only with model=at other model=* values
won't work, not that you must use it if it exists

> Of course there is a little bit of a controversy between this logic
> and what FAQ tells us: "model = series40, if you have Nokia
> non-Symbian Series60 phone". (By the way, this led to ponderance
> of the possibilities for a Series60, but nonetheless non-Symbian
> phones to exist.)

I don't think they exist but there are Symbians which aren't Nokia
Series60 (they're UIQ)
if you're talking about grammar we're open to suggestions

--

-- 
Daniele Forsi

7	May 2013
13	April 2013
18	March 2013
12	February 2013
28	January 2013
35	December 2012
21	November 2012
18	October 2012
11	September 2012
20	August 2012
29	July 2012
22	June 2012
10	May 2012
34	April 2012
23	March 2012
22	February 2012
14	January 2012
98	December 2011
15	November 2011
30	October 2011
13	September 2011
16	August 2011
39	July 2011
52	June 2011
76	May 2011
16	April 2011
68	March 2011
45	February 2011
89	January 2011
11	December 2010
12	November 2010
18	October 2010
26	September 2010
60	August 2010
49	July 2010
66	June 2010
39	May 2010
44	April 2010
44	March 2010
24	February 2010
27	January 2010
51	December 2009
15	November 2009
55	October 2009
109	September 2009
83	August 2009
75	July 2009
46	June 2009
22	May 2009
80	April 2009
44	March 2009
114	February 2009
88	January 2009
104	December 2008
82	November 2008
50	October 2008
59	September 2008
46	August 2008
75	July 2008
87	June 2008
137	May 2008
55	April 2008
74	March 2008
57	February 2008
117	January 2008
44	December 2007
167	November 2007
173	October 2007
30	September 2007
38	August 2007
153	July 2007
93	June 2007
129	May 2007
152	April 2007
67	March 2007
102	February 2007
119	January 2007
84	December 2006
142	November 2006
142	October 2006
116	September 2006
120	August 2006
69	July 2006
68	June 2006
145	May 2006
136	April 2006
140	March 2006
140	February 2006
213	January 2006
143	December 2005
133	November 2005
99	October 2005
139	September 2005
138	August 2005
108	July 2005
163	June 2005
107	May 2005
108	April 2005
86	March 2005
56	February 2005
230	January 2005
115	December 2004
96	November 2004
143	October 2004
236	September 2004
220	August 2004
182	July 2004
154	June 2004
101	May 2004
139	April 2004
127	March 2004
244	February 2004
184	January 2004
105	December 2003
144	November 2003
187	October 2003
185	September 2003
83	August 2003
224	July 2003
220	June 2003
174	May 2003
180	April 2003
247	March 2003
443	February 2003
324	January 2003
187	December 2002
212	November 2002
192	October 2002
119	September 2002

Gnokii & Nokia N96

SMSD is sending each message twice

Re: SMSD is sending each message twice

SMS reading from Nokia 3120 Classic

rpm cvs versions

get-/writephonebook functionality

Re: rpm cvs versions

Re: SMS reading from Nokia 3120 Classic

Re: SMS reading from Nokia 3120 Classic

Re: SMS reading from Nokia 3120 Classic

Mon	Tue	Wed	Thu	Fri	Sat	Sun

1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30