DXR3 driver for Linux

Drake Kerry | 1 May 2007 16:54

Picon

Picon

Looking good

Ziviny a natravene potraviny se vstrebavaji v tenkem 

 Hi, 

You able  fuck business woman with vast enormous? Visit WWW % RXSHOP1 % NET. Replace % with .

Receptory ve hmatovych fouskach dokazi registrovat tlak, polemizovala, protoze kocka ma casto velmi
�mlsny 
brade, licich a ocase ma kocka pachove zlazy. Otiranim

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

_______________________________________________
Dxr3-devel mailing list
Dxr3-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dxr3-devel

orzeh | 2 May 2007 10:25

Picon

Re: First release-candidate for 0.16.2 -- please test!

Hello!
here's working - mms+mplayer kernel 2.6.21.1,

/sys/class/em8300/em8300-0/device# cat model

**** Detected data ****

PCI revision: 2
Chip revision: 2
Video encoder: ADV7175A at address 0x6a on EM8300 I2C bus 1
EEPROM data: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 checksum: 88d608b3599fabd0cecc5a0b504670c4
read_register(0x1c08) = 0x01

**** Current configuration ****

em8300.ko options:
[use_bt865=0]
dicom_other_pal=1
dicom_fix=1
dicom_control=1
[bt865_ucode_timeout=0]

(Continue reading)

Ville Skyttä | 2 May 2007 18:18

Picon

Picon

Re: First release-candidate for 0.16.2 -- please test!

On Thursday 26 April 2007, Nicolas Boullis wrote:
> Hi,
>
> Although linux kernel 2.6.21 is not out yet, here is a new release
> candidate for em8300 0.16.2.
[...]
> As usual, all comments are welcome.
>
> Please give it a try and report (reports are desperately needed).

Works for me on FC6's 2.6.20.10'ish kernel, and builds with Fedora devel's 
2.6.21.$something.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

Gabor Z. Papp | 2 May 2007 19:08

Picon

Re: First release-candidate for 0.16.2 -- please test!

* Nicolas Boullis <nboullis <at> debian.org>:

| Although linux kernel 2.6.21 is not out yet, here is a new release 
| candidate for em8300 0.16.2.

Linux 2.4.34 ok.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

Adam | 2 May 2007 22:12

Picon

Re: First release-candidate for 0.16.2 -- please test!

Nicolas Boullis wrote:
> Hi,
> 
> Although linux kernel 2.6.21 is not out yet, here is a new release 
> candidate for em8300 0.16.2.

works with 2.6.21-git4

aw:~# cat /sys/class/em8300/em8300-0/device/model

**** Detected data ****

PCI revision: 2
Chip revision: 2
Video encoder: BT865 at address 0x45 on EM8300 I2C bus 1
EEPROM data:
         1022000000020001000100000000000000000000000000000000000000000000
         0000000000000000000000000000000000000000000000000000000000000000
         ffffffffffffffffffffffffffffffff00000000000000000000000000000000
         0000000000000000000000000000000000000000000000000000000000000055
         ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
         ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
         ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
         ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
EEPROM checksum: de6312060b71ed64e42e668a021a5ecb
read_register(0x1c08) = 0x41

**** Current configuration ****

em8300.ko options:

(Continue reading)

Adam | 5 May 2007 15:21

Picon

Re: First release-candidate for 0.16.2 -- please test!

Nicolas Boullis wrote:
> Hi,
> 
> Although linux kernel 2.6.21 is not out yet, here is a new release 
> candidate for em8300 0.16.2.
> 

and with 2.6.21-git5 it doesn't work

It compiles, but with warning:

   CC [M]  /home/aw/em8300-0.16.2-rc2/modules/em8300_main.o
/home/aw/em8300-0.16.2-rc2/modules/em8300_main.c: In function ‘em8300_init’:
/home/aw/em8300-0.16.2-rc2/modules/em8300_main.c:803: warning: implicit 
declaration of function ‘pci_module_init’

and then

modprobe em8300
FATAL: Error inserting em8300 
(/lib/modules/2.6.21-git5/em8300/em8300.ko): Unknown symbol in module, 
or unknown parameter (see dmesg)
FATAL: Error running install command for em8300

em8300: Unknown symbol pci_module_init

Regards,
Adam

-------------------------------------------------------------------------

(Continue reading)

Nicolas Boullis | 7 May 2007 01:12

Picon

0.16.2 is out

Hi,

I just released version 0.16.2 of the drivers. It is now time to start 
gathering as much information as possible, so please have a look at your 
/sys/class/em8300/em8300-0/device/model file, copy its content into a 
new e-mail, fill in the included form, and send it to the specific list, 
as explained in the end.

1) if you don't send me your data for your card, your card may be 
   unsupported in the upcoming releases of the driver
2) the more information you give, the better
3) the fewer "untested" you answer, the better
4) but if you are too lazy to test everything (although it only takes a 
   few minutes, I just did it), few information is still better that 
   none

It's time to start flooding the -poll mailing-list!

Cheers,

Nicolas

PS: thanks to Adam, it is already known that things will have to be 
fixed for 2.6.22... 

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

(Continue reading)

Gabor Z. Papp | 7 May 2007 10:20

Picon

Re: 0.16.2 is out

* Nicolas Boullis <nboullis <at> debian.org>:

| 1) if you don't send me your data for your card, your card may be 
|    unsupported in the upcoming releases of the driver

What about 2.4 based systems?

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

Nicolas Boullis | 7 May 2007 12:22

Picon

Re: 0.16.2 is out

Hi,

On Mon, May 07, 2007 at 10:20:46AM +0200, Gabor Z. Papp wrote:
> * Nicolas Boullis <nboullis <at> debian.org>:
> 
> | 1) if you don't send me your data for your card, your card may be 
> |    unsupported in the upcoming releases of the driver
> 
> What about 2.4 based systems?

Since I think most people use 2.6 kernels, I thought that supporting 
only 2.6 kernels would be sufficient to gather enough information to 
support all cards. But if you wish, I can prepare and send you a patch 
to add the relevant data to the /proc virtual filesystem.

Note that I still want to support 2.4 kernels, and that 
autoconfiguration will (hopefully) work for both 2.4 and 2.6 kernels.

Cheers,

Nicolas

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

Gabor Z. Papp | 7 May 2007 14:43

Picon

Re: 0.16.2 is out

* Nicolas Boullis <nboullis <at> debian.org>:

| Since I think most people use 2.6 kernels, I thought that supporting 
| only 2.6 kernels would be sufficient to gather enough information to 
| support all cards. But if you wish, I can prepare and send you a patch 
| to add the relevant data to the /proc virtual filesystem.

Feel free to send me any 2.4 related patches for testing.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

Group

gmane.linux.drivers.dxr3.devel.

Project Web Page

DXR3 driver for Linux

Search Archive

Page

1 | 2 | 3 | 4 | 5

Articles in period: 47

May 2007

Language

Change language

Options

Current view: Threads only / Showing only 20 lines / Not hiding cited text.
Change to All messages, whole messages, or hide cited text.

Post a message
NNTP Newsgroup
Classic Gmane web interface
XML

XML

RSS Feed
List Information

About Gmane

Recent entries

em8300 Kbuild fix for compat_ioctl (3 Jun 2012)
Latest release? (12 Feb 2012)
em8300 working with recent kernels again. Pushed to github (9 Nov 2011)
Build error with Ubuntu 11.10 (24 Oct 2011)
patch for kernel >= 2.6.37 (11 Jun 2011)
problem using em8300-cgmeiner on 2.6.35-22-generic (22 Nov 2010)
Problem kernel 2.6.36 (29 Oct 2010)
Alsa support (23 Oct 2010)
0.18 source deb: em8300.h not found on lenny? (18 Jul 2010)
Trouble with OSS audio interface under ubuntu 10.04, especially dxr3pl (11 Jul 2010)
em8300 fails to compile with 2.6.35-rc3 (14 Jun 2010)
No subtitles with mplayer (17 May 2010)
Choppy playback on bottom half of the screen on one channel (24 Apr 2010)
[PATCH] em8300_spu_init() function does nothing, so remove it. (18 Mar 2010)
[PATCH] add defines for EM8300_VID_CTRL1 and EM8300_VID_CTRL2 (18 Mar 2010)
Flushing Video Fifo (18 Mar 2010)
em8300 with linux 2.6.33? (4 Mar 2010)
em8300 0.18.0 and xine-lib patch for testing (5 Feb 2010)
0.18.0 is out (21 Dec 2009)
Second release-candidate for 0.18.0 -- please test! (12 Dec 2009)
[PULL REQUEST] some fixes (10 Dec 2009)

Archives

1	October 2012
3	August 2012
2	June 2012
5	February 2012
1	December 2011
9	November 2011
2	October 2011
6	June 2011
2	November 2010
6	October 2010
1	September 2010
4	August 2010
3	July 2010
2	June 2010
1	May 2010
2	April 2010
6	March 2010
4	February 2010
2	January 2010
50	December 2009
5	November 2009
10	October 2009
47	September 2009
6	August 2009
4	July 2009
18	June 2009
5	May 2009
1	April 2009
3	March 2009
17	January 2009
14	December 2008
7	November 2008
33	October 2008
28	September 2008
8	August 2008
5	July 2008
3	June 2008
11	May 2008
28	April 2008
30	March 2008
23	February 2008
17	January 2008
47	December 2007
14	November 2007
8	October 2007
2	September 2007
59	August 2007
22	July 2007
8	June 2007
47	May 2007
19	April 2007
65	March 2007
64	February 2007
21	January 2007
33	December 2006
64	November 2006
10	October 2006
37	September 2006
34	August 2006
22	July 2006
19	June 2006
29	May 2006
40	April 2006
36	March 2006
57	February 2006
160	January 2006
42	December 2005
75	November 2005
46	October 2005
57	September 2005
87	August 2005
33	July 2005
10	June 2005
67	May 2005
58	April 2005
57	March 2005
18	February 2005
15	January 2005
35	December 2004
79	November 2004
23	October 2004
54	September 2004
81	August 2004
41	July 2004
74	June 2004
8	May 2004
1	March 2004

Design

Zawodny | Right Menu | Left Menu

Your Own Design

Paste the URL of your CSS below. Download CSS template