Diane Trout | 2 Sep 05:04 2011

[Bug 535404] Re: client freezes when sound device is selected

Similar problem on ubuntu natty 11.04. Mumble had no audio on usb
headset and would hang when I ran the audio settings wizard until I
removed the [pulseaudio] section that was referring to a bluetooth
headset.

--

-- 
You received this bug notification because you are a member of Debian
VoIP Team, which is subscribed to mumble in Ubuntu.
https://bugs.launchpad.net/bugs/535404

Title:
  client freezes when sound device is selected

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mumble/+bug/535404/+subscriptions
Colin Watson | 3 Sep 01:29 2011

Bug#640163: yate: FTBFS with ld that defaults to --as-needed: bad linkage order

Package: yate
Version: 2.2.0-1~dfsg-1.1
Severity: important
Tags: patch
User: ubuntu-devel <at> lists.ubuntu.com
Usertags: origin-ubuntu ubuntu-patch oneiric

yate fails to build with a linker that defaults to --as-needed, as shown
in this Ubuntu bug report:

  https://bugs.launchpad.net/ubuntu/+source/yate/+bug/832890

This is because of various faults in its link ordering, mostly putting
libraries before the objects that use them rather than after.  See:

  http://wiki.debian.org/ToolChain/DSOLinking#Only_link_with_needed_libraries

The following patch fixes this.

  * Adjust various bits of linkage for 'ld --as-needed'.

diff -Nru yate-2.2.0-1~dfsg/debian/patches/as-needed yate-2.2.0-1~dfsg/debian/patches/as-needed
--- yate-2.2.0-1~dfsg/debian/patches/as-needed	1970-01-01 01:00:00.000000000 +0100
+++ yate-2.2.0-1~dfsg/debian/patches/as-needed	2011-09-03 00:26:27.000000000 +0100
 <at>  <at>  -0,0 +1,96  <at>  <at> 
+Description: Adjust various bits of linkage for 'ld --as-needed'
+Author: Colin Watson <cjwatson <at> ubuntu.com>
+Bug-Ubuntu: https://bugs.launchpad.net/bugs/832890
+Forwarded: no
+Last-Update: 2011-09-02
(Continue reading)

Paul Chitescu | 3 Sep 15:10 2011
Picon

Re: Bug#640163: yate: FTBFS with ld that defaults to --as-needed: bad linkage order

Hi!

Thank you for the report and this patch.

We are working on packaging of the not yet released version 3.4.0 - it will be released when stable and fixed.

Our purpose is to have upstream compile and package on any architecture with no or minimal warnings.

There are a few problems exposed by -Wunused-but-set-variable as well as some pointer-to-integer
conversions on some architectures.

As a maintainer I am currently configuring with:
-Wall -Wformat=2 -Werror=format-security -Wwrite-strings -Wunused-but-set-variable
-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro

Regards,

Paul Chitescu

On Saturday 03 September 2011 02:29:00 am Colin Watson wrote:
> Package: yate
> Version: 2.2.0-1~dfsg-1.1
> Severity: important
> Tags: patch
> User: ubuntu-devel <at> lists.ubuntu.com
> Usertags: origin-ubuntu ubuntu-patch oneiric
>
> yate fails to build with a linker that defaults to --as-needed, as shown
> in this Ubuntu bug report:
>
(Continue reading)

Colin Watson | 3 Sep 16:02 2011
Picon

Re: Bug#640163: yate: FTBFS with ld that defaults to --as-needed: bad linkage order

On Sat, Sep 03, 2011 at 04:10:54PM +0300, Paul Chitescu wrote:
> Thank you for the report and this patch.
> 
> We are working on packaging of the not yet released version 3.4.0 - it
> will be released when stable and fixed.

Great, thanks.

> Our purpose is to have upstream compile and package on any
> architecture with no or minimal warnings.
> 
> There are a few problems exposed by -Wunused-but-set-variable as well
> as some pointer-to-integer conversions on some architectures.
> 
> As a maintainer I am currently configuring with:
> -Wall -Wformat=2 -Werror=format-security -Wwrite-strings -Wunused-but-set-variable
-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro

Excellent.  You might also try -Wl,--no-copy-dt-needed-entries (which I
believe will be the default in binutils very soon).

Regards,

--

-- 
Colin Watson                                       [cjwatson <at> debian.org]
Charlie Schluting ☃ | 8 Sep 00:56 2011

[Bug 844347] [NEW] mumble in oneiric hangs when connecting, or using audio wizard...

Public bug reported:

After upgrading to oneiric and mumble 1.2.3-2ubuntu2, it hangs when
attempting to connect to a server.

When I start mumble, I get the following errors:
PulseAudio: Starting input alsa_input.usb-0d8c_C-Media_USB_Audio_Device-00-default.analog-mono
PulseAudio: Stream error: No such entity
PulseAudio: Starting output: alsa_output.usb-0d8c_C-Media_USB_Audio_Device-00-default.analog-stereo
PulseAudio: Stream error: No such entity

If I click to connect to a server, it just hangs with no further debug
output.

I canceled that, and tried again.. this time entering the audio wizard
first. After the first screen where you select the sound subsystem (I
left PulseAudio as the default choice), I click next and mumble hangs
again with no further output.

When it entered the audio wizard, mumble emitted thusly:
AudioInput: 59700 bits/s, 48000 hz, 480 sample CELT
AudioInput: 59700 bits/s, 48000 hz, 480 sample CELT

** Affects: mumble (Ubuntu)
     Importance: Undecided
         Status: New

--

-- 
You received this bug notification because you are a member of Debian
VoIP Team, which is subscribed to mumble in Ubuntu.
(Continue reading)

Aurelien Jarno | 9 Sep 15:10 2011
Picon

Bug#625379: libpri: ftbfs with gcc-4.6 -Werror

On Tue, May 03, 2011 at 10:33:37AM +0000, Matthias Klose wrote:
> Package: libpri
> Version: 1.4.11.3-1
> Severity: important
> Tags: wheezy sid
> User: debian-gcc <at> lists.debian.org
> Usertags: ftbfs-gcc-4.6 ftbfs-werror
> 
> This package builds with -Werror, and GCC 4.6 triggers new warnings
> which will make the package fail to build.  Currently a Debian patch
> just passes
>     -Wno-error=unused-but-set-variable and
>     -Wno-error=unused-but-set-parameter
> to avoid build failures, but this patch will be reverted with the
> GCC 4.6.1 release, and the severity of the report will be raised.
> 
> The full build log can be found at:
> http://people.debian.org/~doko/tmp/werror/libpri_1.4.11.3-1_lsid64.buildlog
> The last lines of the build log are at the end of this report.
> 

I have just done an NMU to fix this longstanding issue. Please find the
corresponding patch below:

diff -Nru libpri-1.4.11.3/debian/changelog libpri-1.4.11.3/debian/changelog
--- libpri-1.4.11.3/debian/changelog	2010-07-06 09:48:50.000000000 +0200
+++ libpri-1.4.11.3/debian/changelog	2011-09-09 14:57:53.000000000 +0200
 <at>  <at>  -1,3 +1,10  <at>  <at> 
+libpri (1.4.11.3-1.1) unstable; urgency=low
+
(Continue reading)

Debian FTP Masters | 9 Sep 15:13 2011
Picon

Processing of libpri_1.4.11.3-1.1_amd64.changes

libpri_1.4.11.3-1.1_amd64.changes uploaded successfully to localhost
along with the files:
  libpri_1.4.11.3-1.1.dsc
  libpri_1.4.11.3-1.1.debian.tar.gz
  libpri-dev_1.4.11.3-1.1_amd64.deb
  libpri1.4_1.4.11.3-1.1_amd64.deb

Greetings,

	Your Debian queue daemon (running on host franck.debian.org)
Debian FTP Masters | 9 Sep 15:18 2011
Picon

libpri_1.4.11.3-1.1_amd64.changes ACCEPTED into unstable


Accepted:
libpri-dev_1.4.11.3-1.1_amd64.deb
  to main/libp/libpri/libpri-dev_1.4.11.3-1.1_amd64.deb
libpri1.4_1.4.11.3-1.1_amd64.deb
  to main/libp/libpri/libpri1.4_1.4.11.3-1.1_amd64.deb
libpri_1.4.11.3-1.1.debian.tar.gz
  to main/libp/libpri/libpri_1.4.11.3-1.1.debian.tar.gz
libpri_1.4.11.3-1.1.dsc
  to main/libp/libpri/libpri_1.4.11.3-1.1.dsc

Override entries for your package:
libpri-dev_1.4.11.3-1.1_amd64.deb - optional libdevel
libpri1.4_1.4.11.3-1.1_amd64.deb - optional libs
libpri_1.4.11.3-1.1.dsc - source libs

Announcing to debian-devel-changes <at> lists.debian.org
Closing bugs: 625379 

Thank you for your contribution to Debian.
Debian Bug Tracking System | 9 Sep 15:21 2011
Picon

Bug#625379: marked as done (libpri: ftbfs with gcc-4.6 -Werror)

Your message dated Fri, 09 Sep 2011 13:18:23 +0000
with message-id <E1R20yN-0006eu-MT <at> franck.debian.org>
and subject line Bug#625379: fixed in libpri 1.4.11.3-1.1
has caused the Debian Bug report #625379,
regarding libpri: ftbfs with gcc-4.6 -Werror
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner <at> bugs.debian.org
immediately.)

--

-- 
625379: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=625379
Debian Bug Tracking System
Contact owner <at> bugs.debian.org with problems
Picon
From: Matthias Klose <doko <at> debian.org>
Subject: libpri: ftbfs with gcc-4.6 -Werror
Date: 2011-05-03 10:33:37 GMT
(Continue reading)

Julien Lavergne | 13 Sep 23:51 2011

Bug#625393: openr2: fix ftbfs (patch attached)

Package: openr2
Version: 1.3.0-2
Followup-For: Bug #625393
User: ubuntu-devel <at> lists.ubuntu.com
Usertags: origin-ubuntu oneiric ubuntu-patch

*** /tmp/tmp9QEj45
In Ubuntu, the attached patch was applied to fix the FTBFS. 
This variable can be removed because it's a copy/paste from other functions and it's not used in this
particular function.

Changelog :

  * debian/patches:
   - remove-unused-variables.patch: Removed unused variables to fix FTBFS
     (LP: #831064). 

Thanks for considering the patch.

-- System Information:
Debian Release: wheezy/sid
  APT prefers oneiric-updates
  APT policy: (500, 'oneiric-updates'), (500, 'oneiric-security'), (500, 'oneiric')
Architecture: amd64 (x86_64)

Kernel: Linux 3.0.0-10-generic (SMP w/8 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Attachment (tmpqdcDTZ): text/x-c, 1224 bytes
(Continue reading)


Gmane