headers
Alexander Economou | 2 Jul 2005 02:08
Picon

Re: Changing media type of network card

On 6/27/05, Emiliano Castagnari <ecastag <at> fi.uba.ar> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> El  [ Sat 25, Jun 05 - 13:52 ] , Anindya Mozumdar expreso:
> > Hi,
> >      I have a Intel EtherExpress/100 ethernet card. I would like to
> > change the media type to 10base2. However, any attempt of doing this
> > using ifconfig gives the error Operation Not Supported. Is there any
> > way I can change this ?
> 
> Try mii-tool, to do so, you should first find out what capabilities this
> card supports. To do that, you could issue the command 'mii-tool <dev> -vv'.
> 
> This is the output for one of my network cards:
> 
> - -=|[ <at> lambda - root]: /]#> mii-tool eth0 -vv
> Using SIOCGMIIPHY=0x8947
> eth0: negotiated 100baseTx-FD, link ok
>   registers for MII PHY 1:
>     3100 786d 0000 8201 01e1 45e1 0001 0000
>     0000 0000 0000 0000 0000 0000 0000 0000
>     000c 0080 0000 0023 0c59 0406 0200 8560
>     8a7b 01f9 0000 0000 0000 0000 0000 0000
>   product info: vendor 00:00:20, model 32 rev 1
>   basic mode:   autonegotiation enabled
>   basic status: autonegotiation complete, link ok
>   capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
>   advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
>   link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
(Continue reading)

Permalink | Reply | 0 comments |
headers
Keletso Keletso | 6 Jul 2005 09:44
Picon
Favicon

PRINTING PROBLEM

I have a problem printing to a network printer on
linux. I get error 
message:

"cannot open connection - Connection timed out"

Ping tests to the same printer work fine so I'm
confused as to whether the problem is a connection
problem. Pls assist.

		
__________________________________________________________
How much free photo storage do you get? Store your friends 'n family snaps for FREE with Yahoo! Photos http://in.photos.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo <at> vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Permalink | Reply | 1 comment |
headers
Worotel Communications Company | 6 Jul 2005 12:35

Customer Services Representatives needed ASAP


Welcome to one of the most powerful income opportunities available all over the world. Customer Services
Representatives needed ASAP!  
 
As an Customer Services Representatives count Representative you will..  
  
· Participate in a training program which will develop your professional business practices  
· Thrive in a culture with a sales focus that provides multiple sales tools and lead sources  
· Be part of a team where your performance directly impacts financial results  
· Enjoy a salaried position with the opportunity for quarterly sales incentive plan bonuses  
  
 
Requirements:  
  
· A strong commitment to self-motivation  
· PC skill proficiency  
· College education considered, but not required  
· Relocation not required   
 
 
What we offer you:  
 
· Flexibility of hours 
· Part Time 
· Daytime and Evening Hours  
· Professional management team with a strong support system  
 
We sell Web Site Design, Flash, 3D modeling, Branding, Graphic Design, Interface, Multimedia, Print
Production, Banners and a wide range of web programming and software development (anything from simple
applications to full-scale network projects including database planning, development and
(Continue reading)

Permalink | Reply | 1 comment |
headers
terry white | 7 Jul 2005 01:56
Favicon

Re: PRINTING PROBLEM

... ciao:

: on "7-6-2005" "Keletso Keletso" writ:
: problem printing to a network printer on
:
: "cannot open connection - Connection timed out"

   i'd suggest you try something like:

      "telnet  printer.ip.address  printer.port"
                  -or-
      "http://printer.ip.address"

   might offer an indication of life at cable's end ...

--

-- 
... i'm a man, but i can change,
    if i have to , i guess ...

-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo <at> vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Permalink | Reply | 0 comments |
headers
terry white | 7 Jul 2005 02:20
Favicon

Re: Customer Services Representatives needed ASAP

... ciao:

    from the header: "Worotel Communications Company <CV <at> swikey.biz>"

: on "7-6-2005" "Worotel Communications Company" writ:
: Customer Services Representatives needed ASAP!

    it would seem the operative word in that is 'ASAP'.

    having just checked, it seems, "Account for domain swikey.biz as been
suspended".  tends to look as though my dreams of becoming a 'customer
service professional' laid waste ...

--

-- 
... i'm a man, but i can change,
    if i have to , i guess ...

-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo <at> vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Permalink | Reply | 0 comments |
headers
Dermot Paikkos | 8 Jul 2005 14:02

Kernel support for SCSI

Hi,

I am trying to spec a new system and wanted to move my backup device 
to said system. I have been looking at Adaptec site for a UW SCSI-2 
card to suit and noticed that linux is not mentioned as a supported 
OS. I am pretty sure that 2.6+ kernels have built-in support for most 
adaptec card but I can't find any information that might confirm 
that.

The OS will probably be fedora4. I had a look there but there wasn't 
anything. Can someone direct me to somewhere I can find out what 
native support is in built into the latest kernels?

Also, as a point of principle, do Linux admins buy cards from 
manufacturers that do not support our OS?

Thanx.
Dp.

-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo <at> vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Permalink | Reply | 0 comments |
headers
Luca Ferrari | 9 Jul 2005 15:19
Picon
Favicon
Gravatar

unix print support as windows xp compoent?

Hi,
a friend of mine make me notice that in windows xp it's possible to 
install a special windows component called "Unix printer support". 
Anyone knows what does it do?

Thanks,
Luca
--

-- 
Luca Ferrari
fluca1978 <at> infinito.it

-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo <at> vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Permalink | Reply | 1 comment |
headers
Jeff Woods | 11 Jul 2005 10:04
Favicon

Re: unix print support as windows xp compoent?

At 7/9/2005 15:19 +0200, Luca Ferrari wrote:
>a friend of mine make me notice that in windows xp it's possible to 
>install a special windows component called "Unix printer support". 
>Anyone knows what does it do?

Googling for [xp "unix printer support"] shows (in the first 10 hits)
http://www.suseforums.net/index.php?showtopic=11025
which indicates it's an LPR server and has info on how to use it from 
SuSE Linux.

--
Jeff Woods <kazrak+kernel <at> cesmail.net> 

-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo <at> vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Permalink | Reply | 0 comments |
headers
Keletso Keletso | 11 Jul 2005 14:46
Picon
Favicon

Printing Problem - Linux

I get the following msg printing to a Linux printer on
a network: Cannot open connection - connection timed
out. 

I can however ping to the printer.

	

	
		
__________________________________________________________
Free antispam, antivirus and 1GB to save all your messages
Only in Yahoo! Mail: http://in.mail.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo <at> vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Permalink | Reply | 1 comment |
headers
terry white | 11 Jul 2005 22:23
Favicon

Re: Printing Problem - Linux

... ciao:

:	on "7-11-2005" "Keletso Keletso" writ:
: Cannot open connection - connection timed out.
:
: I can however ping to the printer.

    it sounds like the printer and the printing daemon are not using the
same port number ...

--

-- 
... i'm a man, but i can change,
    if i have to , i guess ...

-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo <at> vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Permalink | Reply | 0 comments |

Gmane