ibm-acpi Linux driver development

Adrian C. | 4 Jan 2011 06:02

ThinkPad SL510 information and support

Hello, 
I own a ThinkPad SL510 for 9 months now. Machine has several problems, 
most important completely broken suspend, but it's not bad otherwise. I 
owned worse.

Now when I bought it thinkpad_acpi was not loading, having some hybrid 
IdeaPad firmware it reported "not yet supported ThinkPad detected". 
Neither hdaps or tp_smapi were loading as wel...

Anyway I found the lenovo-sl-laptop project, but it has no support for 
SL510, only SL500, and author never replied to any of my e-mail. Then I 
found asus-laptop has some support for the SL and I made a feature 
request here: http://dev.iksaif.net/issues/27

They were kind to inspect my DSDT and said there's no way to add 
support.

So without any drivers the state is: no fan control, quirky backlight 
but usable (brightness resets on each boot or X restart), no auto mute 
when headphones are plugged in (I mention it because I saw this driver 
has some audio control) and finally, most extra buttons do not work.

Working buttons: vol up, vol dn, mute, fn+f4 suspend, brightness up, 
brightness dn.

Not working buttons: hibernate, screen zoom, screen lock, microphone 
wifi bluetooth touchpad toggles, battery status and the ThinkVantage 
button.

Yesterday by chance I read a claim on some forum "thinkpad_acpi has

(Continue reading)

headers

Dmitriy Ugnichenko | 4 Jan 2011 20:43

Re: ThinkPad SL510 information and support

Hello!

I'm not responsible for this module development, but I notice in your message a string, saying

> no auto mute when headphones are plugged in

The solution to this problem is in proper configuration of your alsa-driver, and thinkpad_acpi is not responsible for muting the general sound, when you're inserting your headphones. So just google for a right config for your intle snd_hda. Hope this advice will help you.

On Tue, Jan 4, 2011 at 5:02 AM, Adrian C. <anrxc-kx7NEWG4oU8pug/h7KTFAQ@public.gmane.orgg> wrote:

Hello,
I own a ThinkPad SL510 for 9 months now. Machine has several problems,
most important completely broken suspend, but it's not bad otherwise. I
owned worse.

Now when I bought it thinkpad_acpi was not loading, having some hybrid
IdeaPad firmware it reported "not yet supported ThinkPad detected".
Neither hdaps or tp_smapi were loading as wel...

Anyway I found the lenovo-sl-laptop project, but it has no support for
SL510, only SL500, and author never replied to any of my e-mail. Then I
found asus-laptop has some support for the SL and I made a feature
request here: http://dev.iksaif.net/issues/27

They were kind to inspect my DSDT and said there's no way to add
support.

So without any drivers the state is: no fan control, quirky backlight
but usable (brightness resets on each boot or X restart), no auto mute
when headphones are plugged in (I mention it because I saw this driver
has some audio control) and finally, most extra buttons do not work.

Working buttons: vol up, vol dn, mute, fn+f4 suspend, brightness up,
brightness dn.

Not working buttons: hibernate, screen zoom, screen lock, microphone
wifi bluetooth touchpad toggles, battery status and the ThinkVantage
button.

Yesterday by chance I read a claim on some forum "thinkpad_acpi has
experimental SL support". I thought it rubbish, but the driver loaded to
my surprise. I run Linux 2.6.36.2 and the output was:

thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 6JET77WW (1.35 ), EC 6JHT59WW-1.179000
thinkpad_acpi: Lenovo ThinkPad SL510, model 28476LG
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
thinkpad_acpi: asked for hotkey mask 0x078dffff, but firmware forced it to 0x008dffff
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9

I keep upgrading the BIOS in hope they will fix the damn suspend. So
since the above I upgraded from 1.35 to 1.41 BIOS which is latest, also
before I dump DSDT and DMI for this request. They are attached to the
message.

Modprobing thinkpad_acpi made all (or nearly all) extra keys working.
This alone is enough for me wanting to use thinkpad_acpi. I'm sold. But
it also had side effects, i.e. the Mute button stopped muting the volume
and its LED would not light on. I'd love to see the support improving a
little. And thank you for making it possible to work at all!

--
Adrian C. (anrxc) | anrxc..sysphere.org | PGP ID: D20A0618
PGP FP: 02A5 628A D8EE 2A93 996E 929F D5CB 31B7 D20A 0618
------------------------------------------------------------------------------
Learn how Oracle Real Application Clusters (RAC) One Node allows customers
to consolidate database storage, standardize their database environment, and,
should the need arise, upgrade to a full multi-node Oracle RAC database
without downtime or disruption
http://p.sf.net/sfu/oracle-sfdevnl
_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel

--
with best regards,
Dmitriy.

------------------------------------------------------------------------------
Learn how Oracle Real Application Clusters (RAC) One Node allows customers
to consolidate database storage, standardize their database environment, and, 
should the need arise, upgrade to a full multi-node Oracle RAC database 
without downtime or disruption
http://p.sf.net/sfu/oracle-sfdevnl

_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel@...
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel

headers

Adrian C. | 4 Jan 2011 21:29

Re: ThinkPad SL510 information and support

On Tue, 4 Jan 2011, Dmitriy Ugnichenko wrote:

> The solution to this problem is in proper configuration of your 
> alsa-driver, and thinkpad_acpi is not responsible for muting the 
> general sound, when you're inserting your headphones. So just google 
> for a right config for your intle snd_hda.

Hello, 
yep that could do the trick, but for this ALC269, or Intel Cantiga HDMI, 
alsa driver is still not functional. Only one model makes this work (the 
"quanta") but severly breaks other mixers and sound.

--

-- 
Adrian C. (anrxc) | anrxc..sysphere.org | PGP ID: D20A0618
PGP FP: 02A5 628A D8EE 2A93 996E  929F D5CB 31B7 D20A 0618

------------------------------------------------------------------------------
Learn how Oracle Real Application Clusters (RAC) One Node allows customers
to consolidate database storage, standardize their database environment, and, 
should the need arise, upgrade to a full multi-node Oracle RAC database 
without downtime or disruption
http://p.sf.net/sfu/oracle-sfdevnl

headers

Fabian Henze | 7 Jan 2011 17:51

Thinkpad T510 microphone mute LED

Hello list,
while trying to use the orange microphone mute LED as a empty battery 
indicator, I found that echo "14 foobar" >/proc/acpi/ibm/led is the only way 
to activate this LED. What do I have to do to access it through sysfs? And why 
is it a "unsafe" LED?

Regards,
Fabian Henze

------------------------------------------------------------------------------
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data to be transmitted over the Web.   Learn how to 
best implement a security strategy that keeps consumers' information secure 
and instills the confidence they need to proceed with transactions.
http://p.sf.net/sfu/oracle-sfdevnl

headers

Henrique de Moraes Holschuh | 8 Jan 2011 00:44

Re: Thinkpad T510 microphone mute LED

On Fri, 07 Jan 2011, Fabian Henze wrote:
> while trying to use the orange microphone mute LED as a empty battery 
> indicator, I found that echo "14 foobar" >/proc/acpi/ibm/led is the only way 
> to activate this LED. What do I have to do to access it through sysfs? And why 
> is it a "unsafe" LED?

Well, it is usafe because you don't someone shadow-unmuting your mic and
keeping that LED on.   You can compile the kernel with unsafe leds enabled
if you want.

I never tracked down all new leds, and lenovo started using some in
different ways.  if it is supported perfectly by /proc/acpi/ibm/led, adding
it to the driver is really trivial.  But I'd appreciate a list of the
thinkpads that have this LED, and reports that they all work well.

--

-- 
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh

------------------------------------------------------------------------------
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data to be transmitted over the Web.   Learn how to 
best implement a security strategy that keeps consumers' information secure 
and instills the confidence they need to proceed with transactions.
http://p.sf.net/sfu/oracle-sfdevnl

headers

Fabian Henze | 8 Jan 2011 12:52

Re: Thinkpad T510 microphone mute LED

Am Samstag, 8. Januar 2011, 00:44:57 schrieb Henrique de Moraes Holschuh:
> Well, it is usafe because you don't someone shadow-unmuting your mic and
> keeping that LED on.   You can compile the kernel with unsafe leds enabled
> if you want.

This LED is always off on my system, so one might as well make accessable for 
the user.

> 
> I never tracked down all new leds, and lenovo started using some in
> different ways.  if it is supported perfectly by /proc/acpi/ibm/led, adding
> it to the driver is really trivial.  But I'd appreciate a list of the
> thinkpads that have this LED, and reports that they all work well.

As far as I know all Thinkpads with the new keyboard layout have this LED 
(T410, T410s, T510, probably X201?).

regards,
Fabian Henze

------------------------------------------------------------------------------
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data to be transmitted over the Web.   Learn how to 
best implement a security strategy that keeps consumers' information secure 
and instills the confidence they need to proceed with transactions.
http://p.sf.net/sfu/oracle-sfdevnl

headers

Adrian C. | 9 Jan 2011 07:25

Re: ThinkPad SL510 information and support

On Tue, 4 Jan 2011, Adrian C. wrote:

> yep that could do the trick, but for this ALC269, or Intel Cantiga 
> HDMI, alsa driver is still not functional. Only one model makes this 
> work (the "quanta") but severly breaks other mixers and sound.

Fixed in 2.6.37. Plain model=auto is OK to use. I could not find which 
commit did it, doesn't matter now. One down two to go, suspend and 
thinkpad_acpi :)

--

-- 
Adrian C. (anrxc) | anrxc..sysphere.org | PGP ID: D20A0618
PGP FP: 02A5 628A D8EE 2A93 996E  929F D5CB 31B7 D20A 0618

------------------------------------------------------------------------------
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data to be transmitted over the Web.   Learn how to 
best implement a security strategy that keeps consumers' information secure 
and instills the confidence they need to proceed with transactions.
http://p.sf.net/sfu/oracle-sfdevnl

headers

Toralf Förster | 14 Jan 2011 19:57

ata1: hard resetting link ... ata1: EH complete after switching from VT7 to VT12 and back :

I'm wondering why I get this in /var/log/messages w/ kernel 2.6.37 when I switch from VT7 to VT12 and back :

2011-01-14T13:48:59.649+01:00 n22 kernel: ata1: hard resetting link
2011-01-14T13:48:59.954+01:00 n22 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
2011-01-14T13:48:59.961+01:00 n22 kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
2011-01-14T13:48:59.961+01:00 n22 kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
2011-01-14T13:48:59.961+01:00 n22 kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
2011-01-14T13:48:59.961+01:00 n22 kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
2011-01-14T13:48:59.970+01:00 n22 kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
2011-01-14T13:48:59.970+01:00 n22 kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
2011-01-14T13:48:59.971+01:00 n22 kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
2011-01-14T13:48:59.971+01:00 n22 kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
2011-01-14T13:48:59.972+01:00 n22 kernel: ata1.00: configured for UDMA/100
2011-01-14T13:48:59.972+01:00 n22 kernel: ata1: EH complete 

COmplete dmesg is attached.
-- 
MfG/Kind regards
Toralf Förster

pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3

Linux version 2.6.37 (root <at> n22) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.2, pie-0.4.5) ) #4 SMP Sun Jan 9 16:29:30 CET 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000794a1000 (usable)
 BIOS-e820: 00000000794a1000 - 00000000794a7000 (reserved)
 BIOS-e820: 00000000794a7000 - 00000000795b7000 (usable)
 BIOS-e820: 00000000795b7000 - 000000007960f000 (reserved)
 BIOS-e820: 000000007960f000 - 00000000796c6000 (usable)
 BIOS-e820: 00000000796c6000 - 00000000796d1000 (ACPI NVS)
 BIOS-e820: 00000000796d1000 - 00000000796d4000 (ACPI data)
 BIOS-e820: 00000000796d4000 - 00000000796d8000 (reserved)
 BIOS-e820: 00000000796d8000 - 00000000796dc000 (ACPI NVS)
 BIOS-e820: 00000000796dc000 - 00000000796df000 (reserved)
 BIOS-e820: 00000000796df000 - 0000000079706000 (ACPI NVS)
 BIOS-e820: 0000000079706000 - 0000000079708000 (ACPI data)
 BIOS-e820: 0000000079708000 - 000000007990f000 (reserved)
 BIOS-e820: 000000007990f000 - 000000007999f000 (ACPI NVS)
 BIOS-e820: 000000007999f000 - 00000000799ff000 (ACPI data)
 BIOS-e820: 00000000799ff000 - 0000000079a00000 (usable)
 BIOS-e820: 0000000079c00000 - 000000007c000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI present.
DMI: 6474B84/6474B84, BIOS 7UET91WW (3.21 ) 12/06/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x79a00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-DBFFF uncachable
  DC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 07D000000 mask FFF000000 uncachable
  1 base 07E000000 mask FFE000000 uncachable
  2 base 000000000 mask F80000000 write-back
  3 base 079E00000 mask FFFE00000 uncachable
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000079e00000 - 000000007a000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000  <at>  17fb000-1800000
ACPI: RSDP 000f6440 00024 (v02 LENOVO)
ACPI: XSDT 79949b5a 0009C (v01 LENOVO TP-7U    00003210  LTP 00000000)
ACPI: FACP 79949d00 000F4 (v03 LENOVO TP-7U    00003210 LNVO 00000001)
ACPI: DSDT 7994a10e 0FAE1 (v01 LENOVO TP-7U    00003210 MSFT 03000000)
ACPI: FACS 7998e000 00040
ACPI: SSDT 79949eb4 0025A (v01 LENOVO TP-7U    00003210 MSFT 03000000)
ACPI: ECDT 79959bef 00052 (v01 LENOVO TP-7U    00003210 LNVO 00000001)
ACPI: APIC 79959c41 00078 (v01 LENOVO TP-7U    00003210 LNVO 00000001)
ACPI: MCFG 79959cb9 0003C (v01 LENOVO TP-7U    00003210 LNVO 00000001)
ACPI: HPET 79959cf5 00038 (v01 LENOVO TP-7U    00003210 LNVO 00000001)
ACPI: SLIC 79959dc2 00176 (v01 LENOVO TP-7U    00003210  LTP 00000000)
ACPI: BOOT 79959f38 00028 (v01 LENOVO TP-7U    00003210  LTP 00000001)
ACPI: ASF! 79959f60 000A0 (v16 LENOVO TP-7U    00003210 PTL  00000001)
ACPI: SSDT 7998d1fa 00568 (v01 LENOVO TP-7U    00003210 INTL 20050513)
ACPI: TCPA 79707000 00032 (v00                 00000000      00000000)
ACPI: DMAR 79706000 00120 (v01               ? 00000001      00000000)
ACPI: SSDT 796d3000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: SSDT 796d2000 00274 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 796d1000 00242 (v01  PmRef    ApTst 00003000 INTL 20050624)
ACPI: DMI detected: Lenovo ThinkPad T400
ACPI: Local APIC address 0xfee00000
1058MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x00079a00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x000794a1
    0: 0x000794a7 -> 0x000795b7
    0: 0x0007960f -> 0x000796c6
    0: 0x000799ff -> 0x00079a00
On node 0 totalpages: 497143
free_area_init_node: node 0, pgdat c132dcc0, node_mem_map f68c5200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3950 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 2117 pages used for memmap
  HighMem zone: 267814 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
4 Processors exceeds NR_CPUS limit of 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu  <at> f6400000 s25664 r0 d23488 u2097152
pcpu-alloc: s25664 r0 d23488 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 493250
Kernel command line: root=/dev/sda7 reboot=pci no_console_suspend
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:00079a00)
Memory: 1967808k/1992704k available (2393k kernel code, 20764k reserved, 876k data, 644k init, 1079724k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff8f000 - 0xfffff000   ( 448 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc1332000 - 0xc13d3000   ( 644 kB)
      .data : 0xc12566a5 - 0xc1331918   ( 876 kB)
      .text : 0xc1000000 - 0xc12566a5   (2393 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:320
CPU 0 irqstacks, hard=f6006000 soft=f6008000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2393.988 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.97 BogoMIPS (lpj=2393988)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20101013
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     P8600   <at>  2.40GHz stepping 06
CPU 1 irqstacks, hard=f63e2000 soft=f63e4000
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (9575.71 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Linux)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: SSDT 796d6c20 002C8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 002C8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 796d4020 0087A (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0087A (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 796d5ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT 796d5f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit]
pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.3: [8086:2a47] type 0 class 0x000700
pci 0000:00:03.3: reg 10: [io  0x1830-0x1837]
pci 0000:00:03.3: reg 14: [mem 0xfc024000-0xfc024fff]
pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff]
pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff]
pci 0000:00:19.0: reg 18: [io  0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io  0x1860-0x187f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io  0x1880-0x189f]
pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io  0x18a0-0x18bf]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x18c0-0x18df]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0x18e0-0x18ff]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0x1c00-0x1c1f]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 14: [io  0x183c-0x183f]
pci 0000:00:1f.2: reg 18: [io  0x1c40-0x1c47]
pci 0000:00:1f.2: reg 1c: [io  0x1838-0x183b]
pci 0000:00:1f.2: reg 20: [io  0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x1c60-0x1c7f]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [8086:4237] type 0 class 0x000280
pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.1:   bridge window [mem 0xf4300000-0xf43fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.3:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.4:   bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
pci 0000:15:00.0: [1180:0476] type 2 class 0x000607
pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00
pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
pci 0000:00:1e.0:   bridge window [mem 0xf4800000-0xf7ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
reserve RAM buffer: 00000000794a1000 - 000000007bffffff 
reserve RAM buffer: 00000000795b7000 - 000000007bffffff 
reserve RAM buffer: 00000000796c6000 - 000000007bffffff 
reserve RAM buffer: 0000000079a00000 - 000000007bffffff 
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
pnp 00:00: [mem 0x000dc000-0x000dffff]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0x7bffffff]
pnp 00:00: [mem 0xfec00000-0xfed3ffff]
pnp 00:00: [mem 0xfed4c000-0xffffffff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: [io  0x0000-0x0cf7 window]
pnp 00:01: [io  0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0x7c000000-0xfebfffff window]
pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0090-0x009f]
pnp 00:02: [io  0x0024-0x0025]
pnp 00:02: [io  0x0028-0x0029]
pnp 00:02: [io  0x002c-0x002d]
pnp 00:02: [io  0x0030-0x0031]
pnp 00:02: [io  0x0034-0x0035]
pnp 00:02: [io  0x0038-0x0039]
pnp 00:02: [io  0x003c-0x003d]
pnp 00:02: [io  0x00a4-0x00a5]
pnp 00:02: [io  0x00a8-0x00a9]
pnp 00:02: [io  0x00ac-0x00ad]
pnp 00:02: [io  0x00b0-0x00b5]
pnp 00:02: [io  0x00b8-0x00b9]
pnp 00:02: [io  0x00bc-0x00bd]
pnp 00:02: [io  0x0050-0x0053]
pnp 00:02: [io  0x0072-0x0077]
pnp 00:02: [io  0x002e-0x002f]
pnp 00:02: [io  0x1000-0x107f]
pnp 00:02: [io  0x1180-0x11ff]
pnp 00:02: [io  0x0800-0x080f]
pnp 00:02: [io  0x15e0-0x15ef]
pnp 00:02: [io  0x1600-0x167f]
pnp 00:02: [io  0x1680-0x169f]
pnp 00:02: [mem 0xe0000000-0xefffffff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed10000-0xfed13fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
pnp 00:02: [mem 0xfed45000-0xfed4bfff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x0000-0x000f]
pnp 00:04: [io  0x0080-0x008f]
pnp 00:04: [io  0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (disabled)
pnp 00:0b: [io  0x0378-0x037f]
pnp 00:0b: [io  0x0778-0x077f]
pnp 00:0b: [irq 7]
pnp 00:0b: [dma 0]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0c: [mem 0xfed40000-0xfed44fff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x7bffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:02: [io  0x1000-0x107f] has been reserved
system 00:02: [io  0x1180-0x11ff] has been reserved
system 00:02: [io  0x0800-0x080f] has been reserved
system 00:02: [io  0x15e0-0x15ef] has been reserved
system 00:02: [io  0x1600-0x167f] has been reserved
system 00:02: [io  0x1680-0x169f] has been reserved
system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0x7c000000-0x7c1fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x7c200000-0x7c3fffff 64bit pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0x7c400000-0x7c5fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x8000-0x8fff]
pci 0000:00:1c.1: BAR 7: assigned [io  0x9000-0x9fff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:1c.0:   bridge window [mem 0x7c000000-0x7c1fffff]
pci 0000:00:1c.0:   bridge window [mem 0x7c200000-0x7c3fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.1:   bridge window [mem 0xf4300000-0xf43fffff]
pci 0000:00:1c.1:   bridge window [mem 0x7c400000-0x7c5fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.3:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.4:   bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
pci 0000:15:00.0: BAR 9: assigned [mem 0xf0000000-0xf3ffffff pref]
pci 0000:15:00.0: BAR 10: assigned [mem 0x80000000-0x83ffffff]
pci 0000:15:00.0: BAR 7: assigned [io  0x4000-0x40ff]
pci 0000:15:00.0: BAR 8: assigned [io  0x4400-0x44ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0:   bridge window [io  0x4000-0x40ff]
pci 0000:15:00.0:   bridge window [io  0x4400-0x44ff]
pci 0000:15:00.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
pci 0000:15:00.0:   bridge window [mem 0x80000000-0x83ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
pci 0000:00:1e.0:   bridge window [mem 0xf4800000-0xf7ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x7c000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0x7c000000-0x7c1fffff]
pci_bus 0000:02: resource 2 [mem 0x7c200000-0x7c3fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
pci_bus 0000:03: resource 2 [mem 0x7c400000-0x7c5fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref]
pci_bus 0000:15: resource 0 [io  0x4000-0x7fff]
pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff]
pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
pci_bus 0000:15: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:15: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:15: resource 9 [mem 0x7c000000-0xfebfffff]
pci_bus 0000:16: resource 0 [io  0x4000-0x40ff]
pci_bus 0000:16: resource 1 [io  0x4400-0x44ff]
pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
pci_bus 0000:16: resource 3 [mem 0x80000000-0x83ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Simple Boot Flag at 0x35 set to 0x1
highmem bounce pool size: 64 pages
msgmni has been set to 1734
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1d
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: ACPI _OSC control granted for 0x1d
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: ACPI _OSC control granted for 0x1d
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1d
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
ERST: Table is not found!
GHES: HEST is not enabled!
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048 <at> 0xfc226000 port 0xfc226100 irq 44
ata2: SATA max UDMA/133 abar m2048 <at> 0xfc226000 port 0xfc226180 irq 44
ata3: DUMMY
ata4: DUMMY
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Checking hibernation image partition /dev/sda6
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: HITACHI HTS723216L9SA60, FC2ZC50A, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72321 FC2Z PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
ata2.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U20N  HX12 PQ: 0 ANSI: 5
PM: Hibernation image partition 8:6 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
kmemleak: Kernel memory leak detector initialized
kmemleak: Automatic memory scanning thread started
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda7): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
Freeing unused kernel memory: 644k freed
Write protecting the kernel text: 2396k
Write protecting the kernel read-only data: 704k
udev: starting version 151
udevd (572): /proc/572/oom_adj is deprecated, please use /proc/572/oom_score_adj instead.
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
wmi: Mapper loaded
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (53 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (57 C)
cfg80211: Calling CRDA to update world regulatory domain
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Battery Slot [BAT0] (battery present)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Non-volatile memory driver v1.3
serial 00:0a: [io  0x03f8-0x03ff]
serial 00:0a: [irq 4]
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
serial 00:0a: activated
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.37 uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.37 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.37 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.37 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.37 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.37 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ACPI: acpi_idle registered with cpuidle
Linux agpgart interface v0.103
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
usb 2-2: new full speed USB device using uhci_hcd and address 2
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:11:75:c4
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 46 for MSI/MSI-X
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.37 ehci_hcd
usb usb7: SerialNumber: 0000:00:1a.7
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.37 ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.7
IBM TrackPoint firmware: 0x0e, buttons: 3/3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7UET91WW (3.21 ), EC 7VHT16WW-1.06
thinkpad_acpi: Lenovo ThinkPad T400, model 6474B84
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M  <at>  0xd0000000
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 2-2: device not accepting address 2, error -71
hub 2-0:1.0: unable to enumerate USB device on port 2
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
usb 7-5: new high speed USB device using ehci_hcd and address 3
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
usb 7-5: New USB device found, idVendor=04b3, idProduct=4485
usb 7-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 7-5:1.0: USB hub found
hub 7-5:1.0: 4 ports detected
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
usb 2-2: new full speed USB device using uhci_hcd and address 4
i915 0000:00:02.0: irq 48 for MSI/MSI-X
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
usb 2-2: Manufacturer: Lenovo Computer Corp
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
usb 7-5.1: new low speed USB device using ehci_hcd and address 4
acpi device:02: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 7-5.1: New USB device found, idVendor=046a, idProduct=0023
usb 7-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 7-5.3: new full speed USB device using ehci_hcd and address 5
usb 7-5.3: New USB device found, idVendor=043d, idProduct=0078
usb 7-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-5.3: Product: Lexmark Z600 Series
usb 7-5.3: Manufacturer: Lexmark 
usb 7-5.3: SerialNumber: 18K670127065550
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 7-5.4: new low speed USB device using ehci_hcd and address 6
usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x043D pid 0x0078
usbcore: registered new interface driver usblp
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5.1/7-5.1:1.0/input/input11
cherry 0003:046A:0023.0001: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.7-5.1/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5.1/7-5.1:1.1/input/input12
cherry 0003:046A:0023.0002: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.7-5.1/input1
usb 7-5.4: New USB device found, idVendor=046d, idProduct=c044
usb 7-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-5.4: Product: USB-PS/2 Optical Mouse
usb 7-5.4: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5.4/7-5.4:1.0/input/input13
generic-usb 0003:046D:C044.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.4/input0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA <at> public.gmane.org
EXT3-fs (sda7): using internal journal
hdaps: inverting axis (3) readings.
hdaps: LENOVO ThinkPad T400 detected.
input: hdaps as /devices/platform/hdaps/input/input14
hdaps: driver successfully loaded.
fuse init (API version 7.15)
Adding 2003364k swap on /dev/sda6.  Priority:-1 extents:1 across:2003364k 
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
NET: Registered protocol family 17
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
PPP generic driver version 2.4.2
NET: Registered protocol family 24
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Console: switching to colour frame buffer device 180x56
microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60f
microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60f
microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6 <at> public.gmane.org>, Peter Oruba
microcode: Microcode Update Driver: v2.00 removed.
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w <at> public.gmane.org>
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
ata1: EH complete
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
ata1: EH complete
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
ata1: EH complete
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
ata1: EH complete
kmemleak: 11 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

------------------------------------------------------------------------------
Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
Finally, a world-class log management solution at an even better price-free!
Download using promo code Free_Logger_4_Dev2Dev. Offer expires 
February 28th, so secure your free ArcSight Logger TODAY! 
http://p.sf.net/sfu/arcsight-sfd2d

_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel@...
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel

headers

Stefan /*St0fF*/ Hübner | 17 Jan 2011 20:56

X61t ACPI-Events for tablet mode

Help, everybody.

I haven't used the feature for a pretty long time (no more lectures) and
now I realized that I do not get any

 TP_HKEY_EV_TABLET_TABLET        = 0x5009, /* tablet swivel up */
 TP_HKEY_EV_TABLET_NOTEBOOK      = 0x500a, /* tablet swivel down */

events anymore.  Interestingly the

  TP_HKEY_EV_PEN_INSERTED         = 0x500b, /* tablet pen inserted */
  TP_HKEY_EV_PEN_REMOVED          = 0x500c, /* tablet pen removed */

events still happen and are reported as ACPI_Events.

I did a hexdump of /dev/input/input8 (as that's where the sysfs-entries
guide me), these are the results of "tablet on"

0000000 96c7 4d34 0000 0000 8508 000d 0000 0000
0000010 0005 0001 0001 0000 96c7 4d34 0000 0000
0000020 8512 000d 0000 0000 0000 0000 0000 0000

and "tablet off (Laptop mode)":
0000030 96c9 4d34 0000 0000 0259 000b 0000 0000
0000040 0005 0001 0000 0000 96c9 4d34 0000 0000
0000050 0263 000b 0000 0000 0000 0000 0000 0000

So it seems like somehow the input is filtered away weirdly.  Any ideas
where I have to look for it?

Thanks in advance,
Stefan

------------------------------------------------------------------------------
Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
Finally, a world-class log management solution at an even better price-free!
Download using promo code Free_Logger_4_Dev2Dev. Offer expires 
February 28th, so secure your free ArcSight Logger TODAY! 
http://p.sf.net/sfu/arcsight-sfd2d

headers

Henrique de Moraes Holschuh | 22 Jan 2011 14:11

Re: ata1: hard resetting link ... ata1: EH complete after switching from VT7 to VT12 and back :

On Fri, 14 Jan 2011, Toralf Förster wrote:
> I'm wondering why I get this in /var/log/messages w/ kernel 2.6.37 when I switch from VT7 to VT12 and back :
> 
> 2011-01-14T13:48:59.649+01:00 n22 kernel: ata1: hard resetting link
> 2011-01-14T13:48:59.954+01:00 n22 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> 2011-01-14T13:48:59.961+01:00 n22 kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> 2011-01-14T13:48:59.961+01:00 n22 kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
> 2011-01-14T13:48:59.961+01:00 n22 kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
> 2011-01-14T13:48:59.961+01:00 n22 kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
> 2011-01-14T13:48:59.970+01:00 n22 kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> 2011-01-14T13:48:59.970+01:00 n22 kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
> 2011-01-14T13:48:59.971+01:00 n22 kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
> 2011-01-14T13:48:59.971+01:00 n22 kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
> 2011-01-14T13:48:59.972+01:00 n22 kernel: ata1.00: configured for UDMA/100
> 2011-01-14T13:48:59.972+01:00 n22 kernel: ata1: EH complete 

I have no idea whatsoever.  It should not be thinkpad-acpi, though.

I don't even know whom to refer you to.  Maybe ask in LKML directly?  Use
the subject "libata EH running when switching VTs".  If one of those VTs are
in X.org control, say that as well.

--

-- 
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh

------------------------------------------------------------------------------
Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
Finally, a world-class log management solution at an even better price-free!
Download using promo code Free_Logger_4_Dev2Dev. Offer expires 
February 28th, so secure your free ArcSight Logger TODAY! 
http://p.sf.net/sfu/arcsight-sfd2d

3	April 2013
15	March 2013
12	February 2013
10	January 2013
20	December 2012
5	November 2012
5	October 2012
2	September 2012
11	August 2012
22	July 2012
21	June 2012
8	May 2012
3	April 2012
15	March 2012
10	February 2012
11	January 2012
9	December 2011
23	November 2011
13	October 2011
7	September 2011
18	August 2011
5	July 2011
29	June 2011
23	May 2011
9	April 2011
18	March 2011
14	February 2011
38	January 2011
8	December 2010
8	November 2010
9	October 2010
16	September 2010
7	August 2010
10	July 2010
13	June 2010
24	May 2010
27	April 2010
28	March 2010
30	February 2010
39	January 2010
47	December 2009
48	November 2009
20	October 2009
49	September 2009
25	August 2009
15	July 2009
41	June 2009
21	May 2009
42	April 2009
15	March 2009
12	February 2009
45	January 2009
14	December 2008
54	November 2008
65	October 2008
20	September 2008
27	August 2008
48	July 2008
19	June 2008
25	May 2008
56	April 2008
21	March 2008
84	February 2008
100	January 2008
38	December 2007
48	November 2007
136	October 2007
77	September 2007
70	August 2007
245	July 2007
39	June 2007
118	May 2007
71	April 2007
123	March 2007
78	February 2007
15	January 2007
25	December 2006
71	November 2006

Mon	Tue	Wed	Thu	Fri	Sat	Sun

					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28	29	30
31