Re Matrimonial Proposal from the United Kingdom.

Name of Sender: Mr. Stephen 
Subject: Seeking invitations for a suitable marriage proposal.

Note: May the Grace of God be filled in your heart and may your every days
be full of warmth and love. I  am sending this brief introduction to you
about myself in the hope that you will kindly consider this proposal for
your kind attention, I got your email address just from collecting email
addresses from the matrimonial sites/indian related sites on the net. It is
intended that you had placed an advert for a matrimonial. I would ask if
you could consider this for yourself or perhaps you are seeking for a
family member or you know someone you can forward this to who might know a
decent family who are seeking decent and serious marriage proposals. The
majority of marriages are fixed through brothers, aunts, cousins, or other
introductions through members of the immediate community, so it is by
sending my basic introduction out that I am hoping this will get
circulated, and eventually be passed on to decent families who are seeking
decent proposals..Once again my sincere appologise if I have made the
mistake of sending it to the wrong mail...this is not any kind of mailing
list.
Thanking you kindly
Stephen

Message Follows:

Warm Greetings from the United Kingdom,

My name is Stephen I am a white race British boy, and I'm 34 years of age..
I am a very god fearing type of person and am described as a simple type of
a boy, I am seeking a warm hearted Indian girl who also has strong
religious beliefs. I have never been married before and seek the same. 

Re Matrimonial Proposal from the United Kingdom.

Name of Sender: Mr. Stephen 
Subject: Seeking invitations for a suitable marriage proposal.

Note: May the Grace of God be filled in your heart and may your every days
be full of warmth and love. I  am sending this brief introduction to you
about myself in the hope that you will kindly consider this proposal for
your kind attention, I got your email address just from collecting email
addresses from the matrimonial sites/indian related sites on the net. It is
intended that you had placed an advert for a matrimonial. I would ask if
you could consider this for yourself or perhaps you are seeking for a
family member or you know someone you can forward this to who might know a
decent family who are seeking decent and serious marriage proposals. The
majority of marriages are fixed through brothers, aunts, cousins, or other
introductions through members of the immediate community, so it is by
sending my basic introduction out that I am hoping this will get
circulated, and eventually be passed on to decent families who are seeking
decent proposals..Once again my sincere appologise if I have made the
mistake of sending it to the wrong mail...this is not any kind of mailing
list.
Thanking you kindly
Stephen

Message Follows:

Warm Greetings from the United Kingdom,

My name is Stephen I am a white race British boy, and I'm 34 years of age..
I am a very god fearing type of person and am described as a simple type of
a boy, I am seeking a warm hearted Indian girl who also has strong
religious beliefs. I have never been married before and seek the same. 

(no subject)

Re: Screensaver

Due to disagreement with the providers of the  <at> inorbit.com e-mail service, I am trying to use this e-mail
address only to notify everyone that I can be contacted at < m4s1g001 <at> sneakemail.com >. I will respond
from there with my new e-mail address.

Thank you.
Tom Liotta

Re: XEmacs 21.4.13 "Rational FORTRAN" is released

Hi.

At Mon, 26 May 2003 19:57:32 -0400,
Vin Shelton wrote:
> 
> 
> *          XEmacs 21.4.13 "Rational FORTRAN" is released.
>       "Rational FORTRAN" is the fourteenth in the OXYMORON series.

I've installed 21.4.13 and diff -u with previous one,then
/usr/local/lib/xemacs-21.4.13/lisp/mule/canna-leim.elc was
lost. Is this the specification?

Regards.
--
kiri <at> FreeBSD.org

Re: XEmacs 21.4.13 "Rational FORTRAN" is released

KIRIYAMA Kazuhiko <kiri <at> kiri.slis.tsukuba.ac.jp> writes:

> At Mon, 26 May 2003 19:57:32 -0400,
> Vin Shelton wrote:
>> 
>> 
>> *          XEmacs 21.4.13 "Rational FORTRAN" is released.
>>       "Rational FORTRAN" is the fourteenth in the OXYMORON series.
>
> I've installed 21.4.13 and diff -u with previous one,then
> /usr/local/lib/xemacs-21.4.13/lisp/mule/canna-leim.elc was
> lost. Is this the specification?

What steps did you take to build and install?

The patches do not include .elc files, so if you applied the patch,
you would not have canna-leim.elc.

  - Vin

Re: XEmacs 21.4.13 "Rational FORTRAN" is released

At Wed, 04 Jun 2003 08:52:37 -0400,
Vin Shelton wrote:
> 
> > I've installed 21.4.13 and diff -u with previous one,then
> > /usr/local/lib/xemacs-21.4.13/lisp/mule/canna-leim.elc was
> > lost. Is this the specification?
> 
> What steps did you take to build and install?

All build(but install ;)process has put bellow:

http://www.openedu.org/~kiri/troubles/xemacs21-mule_build.log

> The patches do not include .elc files, so if you applied the patch,
> you would not have canna-leim.elc.

What about patches you mentioned? Applied patches when I built were
shown bellow:

http://www.freebsd.org/cgi/cvsweb.cgi/ports/editors/xemacs21-mule/files/

endless fontifying in 21.4.13

Hi.
I updated to 21.4.13, but in open files very longest time
takes to fontifying(face) saying such as:

Fontifying .Xresources...(syntactically)

I can't find out to recover that. Is there any ways to
settledown?

My environment is as follows:

FreeBSD 5.1-RELEASE + XFree86-4.3.0 + XEmacs 21.4.13

PS.
  In the 21.4.12 nothing has happend.

Regards
---
kiri <at> FreeBSD.org

speedbar location

Hello,

when I invoke the speedbar with  "speedbar-get-focus", the speedbar 
allways appears at an inconvenient location. It is above the xemacs 
window, but I want it to its left side and a bit smaller then the xemacs 
window. So I have to move and resize it - and I am too lazy to do this ;)

Is there a way to give the speedbar a different default location ? 

Markus Grunwald
Development

PRÜFTECHNIK Condition Monitoring GmbH
Oskar-Messter-Straße 19 - 21
85737 Ismaning
http://www.pruftechnik.com
Tel: 089 99616-177

---------------------------------------------------------------------------------------------------------

The information in this e-mail is confidential and is intended solely for 
the addressee. Access to this e-mail by anyone else is unauthorized. If 
you have received this e-mail in error, please notify 
postmaster <at> pruftechnik.com 
PRUFTECHNIK cannot guarantee that any files attached to this e-mail are 
free from viruses or any other program code that may be harmful to your 
computer, and, as such, is not liable for any damage that may be caused as 
a result. PRUFTECHNIK reserves the right to monitor all e-mail 
communications through its networks.

Réf. : endless fontifying in 21.4.13

Hello,

I had the same problem and was given a workaround which you can find there :
http://list-archive.xemacs.org/xemacs-beta/200305/msg00467.html

Regards,

PH

KIRIYAMA Kazuhiko <kiri <at> kiri.slis.tsukuba.ac.jp> <at> xemacs.org on 05/06/2003
08:58:11

Envoyé par :      xemacs-news-admin <at> xemacs.org

Pour: xemacs <at> xemacs.org
cc:    (ccc : Philippe HAUTION/CESE/GRT/FR)
Objet:     endless fontifying in 21.4.13

Hi.
I updated to 21.4.13, but in open files very longest time
takes to fontifying(face) saying such as:

Fontifying .Xresources...(syntactically)

I can't find out to recover that. Is there any ways to
settledown?

My environment is as follows:

FreeBSD 5.1-RELEASE + XFree86-4.3.0 + XEmacs 21.4.13

PS.
  In the 21.4.12 nothing has happend.

Regards
---
kiri <at> FreeBSD.org