I was poking around and noticed that the mac-* have been renamed to ns-* names. They are still not documented, however. Sorry to cause any confusion by refering to their old names.
jonathan <at> doves.demon.co.uk wrote: > I used the mouse. Shift-click didn't behave as it used to, but I found "Set Default Font..." on the "Options" menu on the menu bar. It seemed to work as I expected: the font is distinctive enough that I'm sure the buffer was using the font I chose (Code2000). But the private-use characters were displayed as empty boxes. > Because these characters are from the Private Use Area, Emacs cannot assume that just because a font has glyphs at those code points that they are the right glyphs. You will need to explicitly tell Emacs that you want to use Code2000 to represent the PUA range: (set-fontset-font t '(#xe000 . #xf8ff) (font-spec :family "Code2000"))
David Caldwell wrote: > The following variables exist but are not documented in the emacs info: > > mac-allow-anti-aliasing Other font backends that support anti-aliasing use an :antialias property on the font to disable or use a different type of antialiasing for that font. There are a lot of extra font properties like this that aren't documented either, especially in the xft and w32 font backends.
Just now I tried to open /ssh:dhcp98:/ and it asked me for "dhcp98's password". It *should* have asked me for the passphrase for one of my SSH keys (id_rsa). This either means that the prompt is misleading (i.e. it wants my passphrase) or worse, that it genuinely wants to use password-based authentication (i.e. ignoring my key). In GNU Emacs 23.0.91.1 (i486-pc-linux-gnu) of 2009-03-30 on elegiac, modified by Debian (emacs-snapshot package, version 1:20090329-1) configured using `configure '--build' 'i486-linux-gnu' '--host' 'i486-linux-gnu' '--prefix=/usr' '--sharedstatedir=/var/lib' '--libexecdir=/usr/lib' '--localstatedir=/var' '--infodir=/usr/share/info' '--mandir=/usr/share/man' '--with-pop=yes' '--enable-locallisppath=/etc/emacs-snapshot:/etc/emacs:/usr/local/share/emacs/23.0.91/site-lisp:/usr/local/share/emacs/site-lisp:/usr/share/emacs/23.0.91/site-lisp:/usr/share/emacs/site-lisp' '--with-x=no' '--without-dbus' '--without-sound' 'build_alias=i486-linux-gnu' 'host_alias=i486-linux-gnu' 'CFLAGS=-DDEBIAN -DSITELOAD_PURESIZE_EXTRA=5000 -g -O2' 'LDFLAGS=-g -Wl,--as-needed' 'CPPFLAGS='' Important settings: value of $LC_ALL: nil value of $LC_COLLATE: C value of $LC_CTYPE: nil value of $LC_MESSAGES: nil value of $LC_MONETARY: nil value of $LC_NUMERIC: nil value of $LC_TIME: nil value of $LANG: en_AU.utf8 value of $XMODIFIERS: nil locale-coding-system: utf-8-unix default-enable-multibyte-characters: t(Continue reading)
> Because these characters are from the Private Use Area, Emacs cannot assume
> that just because a font has glyphs at those code points that they are the
> right glyphs. You will need to explicitly tell Emacs that you want to use
> Code2000 to represent the PUA range:
> (set-fontset-font t '(#xe000 . #xf8ff) (font-spec :family "Code2000"))
It would probably make sense to just "use the default font" for any PUA
chars supported by that font. It's not strictly correct, but in the
absence of any additional info, it seems like a good heuristic.
Stefan
> 1. Create a dir and write the following to file .dir-locals in the dir
> created:
> ((latex-mode . ((fill-column . 78)
> (coding . "latin-1"))))
> 2. Open or create a .tex file in that dir
> 3. C-h v fill-column RET to check the value
> 4. Change 78 to another value say 75
How do you change it? with C-x f ?
> 5. Re-open the .tex file and you will see fill-column has a value 78
> NOT 75
How do you "re-open" it?
Stefan
>>>>> On Wed, 01 Apr 2009 07:55:52 +0800, Jason Rumney <jasonr <at> gnu.org> said: >> The following variables exist but are not documented in the emacs >> info: >> >> mac-allow-anti-aliasing Confusingly, this is not a variable that controls anti-aliasing, but it changes a font rendering engine so it uses lighter anti-aliasing. This facility seems to be deprecated as of Mac OS X 10.5, so I'd suggest removing this variable together with the corresponding NS variable, ns-use-qd-smoothing. > Other font backends that support anti-aliasing use an :antialias > property on the font to disable or use a different type of > antialiasing for that font. There are a lot of extra font properties > like this that aren't documented either, especially in the xft and > w32 font backends. Still this applies to another NS variable, ns-antialias-text. YAMAMOTO Mitsuharu mituharu <at> math.s.chiba-u.ac.jp
Processing commands for control <at> emacsbugs.donarmstrong.com: > reassign 2836 emacs,ns bug#2836: 23.0.92; The bottom of my font (Monaco 10) is cut off on Mac OS X Warning: Unknown package 'ns' bug reassigned from package `emacs' to `emacs,ns'. > thanks Stopping processing here. Please contact me if you need assistance. Don Armstrong (administrator, Emacs bugs database)
In article <jwvd4bxuqlk.fsf-monnier+emacsbugreports <at> gnu.org>, Stefan Monnier <monnier <at> iro.umontreal.ca> writes: > > Because these characters are from the Private Use Area, Emacs cannot assume > > that just because a font has glyphs at those code points that they are the > > right glyphs. You will need to explicitly tell Emacs that you want to use > > Code2000 to represent the PUA range: > > (set-fontset-font t '(#xe000 . #xf8ff) (font-spec :family "Code2000")) > It would probably make sense to just "use the default font" for any PUA > chars supported by that font. It's not strictly correct, but in the > absence of any additional info, it seems like a good heuristic. I agree. I'll modify the setting of the default fontset to do that. --- Kenichi Handa handa <at> m17n.org
>>>>> On Wed, 01 Apr 2009 10:22:37 +0900, YAMAMOTO Mitsuharu <mituharu <at> math.s.chiba-u.ac.jp> said: >>> The following variables exist but are not documented in the emacs >>> info: >>> >>> mac-allow-anti-aliasing > Confusingly, this is not a variable that controls anti-aliasing, but > it changes a font rendering engine so it uses lighter anti-aliasing. Sorry, this description itself seems to be confusing. I meant, "if the variable is set to non-nil, it selects another font rendering engine whose rendering results in lighter anti-aliasing." YAMAMOTO Mitsuharu mituharu <at> math.s.chiba-u.ac.jp
RSS Feed590 | |
|---|---|
801 | |
1081 | |
1419 | |
1279 | |
1561 | |
1403 | |
1259 | |
1395 | |
945 | |
1243 | |
863 | |
923 | |
1243 | |
995 | |
1076 | |
980 | |
822 | |
1143 | |
1360 | |
1509 | |
755 | |
2082 | |
813 | |
738 | |
565 | |
1088 | |
644 | |
822 | |
884 | |
734 | |
718 | |
728 | |
775 | |
951 | |
689 | |
845 | |
723 | |
480 | |
531 | |
1007 | |
727 | |
750 | |
733 | |
909 | |
924 | |
660 | |
714 | |
819 | |
797 | |
913 | |
1080 | |
1166 | |
823 | |
729 | |
1137 | |
986 | |
1001 | |
361 | |
379 | |
302 | |
130 | |
150 | |
181 | |
167 | |
176 | |
215 | |
214 | |
198 | |
214 | |
222 | |
283 | |
66 | |
38 | |
40 | |
38 | |
60 | |
55 | |
39 | |
55 | |
46 | |
47 | |
62 | |
69 | |
51 | |
49 | |
86 | |
56 | |
62 | |
97 | |
58 | |
45 | |
38 | |
84 | |
42 | |
86 | |
36 | |
79 | |
97 | |
52 | |
64 | |
90 | |
96 | |
96 | |
125 | |
111 | |
77 | |
67 | |
56 | |
87 | |
76 | |
129 | |
196 | |
78 | |
69 | |
129 | |
116 | |
104 | |
15 | |
173 | |
218 | |
209 | |
126 | |
152 | |
207 | |
103 | |
150 | |
154 | |
191 | |
210 | |
261 | |
269 | |
247 | |
404 | |
276 |
