Using OpenOffice dictionaries in WinEdt

Final version of 5.6?

WinEdt Keeps Loosign its Last Status

Hi There,

I use  Win Edt Build: 20050701  (v. 5.4) and everything worked fine until a
couple of weeks ago. Now, everytime I close WinEdt and reopen it does not
show anymore the Recent Files List, neither it Opens all the files that were
opened when I closed it. 

Any thoughts on what might be causing this?

Cheers,
Marcel Oliveira

RE: WinEdt Keeps Loosign its Last Status

> I use  Win Edt Build: 20050701  (v. 5.4) and everything 
> worked fine until a couple of weeks ago. Now, everytime I 
> close WinEdt and reopen it does not show anymore the Recent 
> Files List, neither it Opens all the files that were opened 
> when I closed it. 

Menu: | Options | ConfigurationWizard... |  and open the Projects tab, look
at the two check boxes "Maintain File List" and "Restore Opened Files".  Are
they checked?

Cheers,  Phil

 

 --
 Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con
Email.it http://www.email.it/f

 Sponsor:
 Innammorarsi è facile con Meetic, milioni di single si sono iscritti, si sono conosciuti e hanno
riscoperto l'amore. Tutto con Meetic, prova anche tu!
 Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid‚92&d=7-1

RE: WinEdt Keeps Loosign its Last Status

Hi Philip,

Thanks for your reply. They are all checked: 
- "Maintain File List"
- "Restore Opened Files"
- "Reopen Last Project"
- "Show prj Status Panel"

However, that does not happen. 

Cheers,
Marcel Oliveira

-----Original Message-----
From: Philip G. Ratcliffe [mailto:philip.ratcliffe <at> email.it] 
Sent: quarta-feira, 7 de janeiro de 2009 16:40
To: winedt+list <at> wsg.net
Subject: RE: [WinEdt] WinEdt Keeps Loosign its Last Status

> I use  Win Edt Build: 20050701  (v. 5.4) and everything 
> worked fine until a couple of weeks ago. Now, everytime I 
> close WinEdt and reopen it does not show anymore the Recent 
> Files List, neither it Opens all the files that were opened 
> when I closed it. 

Menu: | Options | ConfigurationWizard... |  and open the Projects tab, look
at the two check boxes "Maintain File List" and "Restore Opened Files".  Are
they checked?

Cheers,  Phil

 

 --
 Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP
autenticato? GRATIS solo con Email.it http://www.email.it/f

 Sponsor:
 Innammorarsi h facile con Meetic, milioni di single si sono iscritti, si
sono conosciuti e hanno riscoperto l'amore. Tutto con Meetic, prova anche
tu!
 Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid92&d=1

Re: WinEdt Keeps Loosign its Last Status

Hello,
       I don't know if this will help but you can take a look at 
"Configuration Wizard: Filetype Associations" in the WinEdt's help.

 From the help:
---------------------
By default WinEdt's Project Manager is configured so as to open 
previously opened documents. If you start an instance of WinEdt by 
clicking on a tex document this may not be the desired behavior, as you 
may be interested in opening only this document. This can be achieved by 
specifying the appropriate command switch through this interface:

-C="WinEdt Caption"
Starts a new instance of WinEdt unless an instance with the same caption 
is already running.
-V
Starts WinEdt in Virgin Mode: The last project is not automatically 
opened and no files are immediately restored.
-P
Starts WinEdt with the Default Project
-N
Starts WinEdt with a new project
-0
Does not restore previously opened documents (note: -0 is zero not the 
letter O)
WinEdt uses the global register %2 to store the value of the specified 
switches.
---------------------

You have to make the changes in: Options> Config. Wizard > File type 
associations > Modify file type associations. Insert what's necessary in 
the "Command switches" command line. And also do what Philip told u (but 
you're already done that).

Best Regards,
Y.Calleecharan

Yogeshwarsing Calleecharan
Division of Solid Mechanics
Department of Applied Physics and Mechanical Engineering
Luleå University of Technology
SE-971 87 Luleå
Sweden

Marcel Oliveira wrote:
> Hi Philip,
> 
> Thanks for your reply. They are all checked: 
> - "Maintain File List"
> - "Restore Opened Files"
> - "Reopen Last Project"
> - "Show prj Status Panel"
> 
> However, that does not happen. 
> 
> Cheers,
> Marcel Oliveira
> 
> -----Original Message-----
> From: Philip G. Ratcliffe [mailto:philip.ratcliffe <at> email.it] 
> Sent: quarta-feira, 7 de janeiro de 2009 16:40
> To: winedt+list <at> wsg.net
> Subject: RE: [WinEdt] WinEdt Keeps Loosign its Last Status
> 
>> I use  Win Edt Build: 20050701  (v. 5.4) and everything 
>> worked fine until a couple of weeks ago. Now, everytime I 
>> close WinEdt and reopen it does not show anymore the Recent 
>> Files List, neither it Opens all the files that were opened 
>> when I closed it. 
> 
> Menu: | Options | ConfigurationWizard... |  and open the Projects tab, look
> at the two check boxes "Maintain File List" and "Restore Opened Files".  Are
> they checked?
> 
> Cheers,  Phil
> 
>  
>  
>  --
>  Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP
> autenticato? GRATIS solo con Email.it http://www.email.it/f
>  
>  Sponsor:
>  Innammorarsi h facile con Meetic, milioni di single si sono iscritti, si
> sono conosciuti e hanno riscoperto l'amore. Tutto con Meetic, prova anche
> tu!
>  Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid92&d=1
> 

RE: WinEdt Keeps Loosign its Last Status

Hi Calleecharan,

Unfortunately I don't believe this would be the problem since even by
opening a document from within WinEdt the problem happens. Besides, I have
never touched these configurations and the problem sunddenly started
happening. 

Thanks for your views anyway.

Cheers,
Marcel Oliveira

-----Original Message-----
From: Yogeshwarsing Calleecharan [mailto:yogeshwarsing.calleecharan <at> ltu.se] 
Sent: quinta-feira, 8 de janeiro de 2009 10:59
To: winedt+list <at> wsg.net
Subject: Re: [WinEdt] WinEdt Keeps Loosign its Last Status

Hello,
       I don't know if this will help but you can take a look at 
"Configuration Wizard: Filetype Associations" in the WinEdt's help.

 From the help:
---------------------
By default WinEdt's Project Manager is configured so as to open 
previously opened documents. If you start an instance of WinEdt by 
clicking on a tex document this may not be the desired behavior, as you 
may be interested in opening only this document. This can be achieved by 
specifying the appropriate command switch through this interface:

-C="WinEdt Caption"
Starts a new instance of WinEdt unless an instance with the same caption 
is already running.
-V
Starts WinEdt in Virgin Mode: The last project is not automatically 
opened and no files are immediately restored.
-P
Starts WinEdt with the Default Project
-N
Starts WinEdt with a new project
-0
Does not restore previously opened documents (note: -0 is zero not the 
letter O)
WinEdt uses the global register %2 to store the value of the specified 
switches.
---------------------

You have to make the changes in: Options> Config. Wizard > File type 
associations > Modify file type associations. Insert what's necessary in 
the "Command switches" command line. And also do what Philip told u (but 
you're already done that).

Best Regards,
Y.Calleecharan

Yogeshwarsing Calleecharan
Division of Solid Mechanics
Department of Applied Physics and Mechanical Engineering
Luleå University of Technology
SE-971 87 Luleå
Sweden

Marcel Oliveira wrote:
> Hi Philip,
> 
> Thanks for your reply. They are all checked: 
> - "Maintain File List"
> - "Restore Opened Files"
> - "Reopen Last Project"
> - "Show prj Status Panel"
> 
> However, that does not happen. 
> 
> Cheers,
> Marcel Oliveira
> 
> -----Original Message-----
> From: Philip G. Ratcliffe [mailto:philip.ratcliffe <at> email.it] 
> Sent: quarta-feira, 7 de janeiro de 2009 16:40
> To: winedt+list <at> wsg.net
> Subject: RE: [WinEdt] WinEdt Keeps Loosign its Last Status
> 
>> I use  Win Edt Build: 20050701  (v. 5.4) and everything 
>> worked fine until a couple of weeks ago. Now, everytime I 
>> close WinEdt and reopen it does not show anymore the Recent 
>> Files List, neither it Opens all the files that were opened 
>> when I closed it. 
> 
> Menu: | Options | ConfigurationWizard... |  and open the Projects tab,
look
> at the two check boxes "Maintain File List" and "Restore Opened Files".
Are
> they checked?
> 
> Cheers,  Phil
> 
>  
>  
>  --
>  Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP
> autenticato? GRATIS solo con Email.it http://www.email.it/f
>  
>  Sponsor:
>  Innammorarsi h facile con Meetic, milioni di single si sono iscritti, si
> sono conosciuti e hanno riscoperto l'amore. Tutto con Meetic, prova anche
> tu!
>  Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid92&d=1
> 

Select problem in macro

Hi 

I have the following macro

SetFindStr("\""'\begin{foo}'**\""'\end{foo}'*");
SetSearchForward(1);
SetSearchCaseSensitive(0);
SetSearchEntire(0);
SetSearchCyclic(0);
SetSearchRelaxed(0);
SetSearchWholeWords(0);
SetSearchInline(0);
SetSearchCurrentDoc;
SetRegEx(1);
SetFindTextSelect(1);
SearchReset;
Find;

After running the macro on a document it selects e.g. the lines:

\begin{foo}
Line1
Line2
\end{foo}

How do I complete the macro such that only lines 1-2 are selected and
the \begin and \end lines not?

Best Regards

Lars Relund

WinEdt and XeLaTeX

Re: alternative PDF viewer in WinEdt 5.3