headers
Wapler Rüdiger | 2 Apr 16:02
Picon
Favicon

WinEdt 5.5 and remotedesktop

Dear Axel,

a few months ago I wrote you about the "saving problem" on remote desktops, i.e. that the mouse remains in the
hourglass form once the Save-Button is pressed when using WinEdt on a remote desktop. Seeing as you seem to
be close to releasing 5.5 I wanted to ask whether you have managed to solve this minor bug. As far as I
remember, other users had exactly the same behavior.

Best regards

Rüdiger
Permalink | Reply | 6 comments |
headers
WinEdt.org | 2 Apr 17:42

Mailing List Guidelines


      WinEdt Mailing List Guidelines
      ==============================

   These guidelines are sent to the WinEdt Mailing List once a month.
   Please keep them in mind when posting to the list.

   ---------------------------------------------------------------------

* What To Post

   The WinEdt Mailing List is for questions about the WinEdt editor. You
   should  not post questions concerning LaTeX, MiKTeX, BibTeX et al. to
   the mailing list. WinEdt is a shell/editor for  LaTeX  etc.  and  the
   list  is  intended  to  answer questions concerning WinEdt, not LaTeX
   etc.
   (Sometimes it might be difficult  to  decide  whether  a  problem  is
   related to WinEdt or to MiKTeX, LaTeX etc. A rule of thumb is: If you
   are having the same  problems  when  running  the  program  from  the
   command line, it is NOT related to WinEdt.)

   A lot of questions are being asked over and over  again.  Check  that
   your question isn't already answered in the WinEdt FAQ at
      <http://www.winedt.org/Doc/FAQ>
   or in the mailing list archives at
      <http://groups.yahoo.com/group/WinEdt>.

   When sending a question to the mailing list, try to be specific.
   Include (at least)
     + the Build number of your WinEdt (see "Help | About WinEdt...")
(Continue reading)

Permalink | Reply | 0 comments |
headers
RS | 2 Apr 17:42
Picon

Re: \# in soft-wrapped lines

On 29.03.2007 23:20, WinEdt Team wrote:
> This was like this all along. From RegEx Help:

Ah, I should really start consulting the docs first ...

Thanks for fixing this, and all the other changes.

Best,
Robert
Permalink | Reply | 0 comments |
headers
Evaristo Arroyo | 3 Apr 01:44
Picon
Picon
Favicon

Yap is slow now

Hola all

I upgrade to winedt 5.5 recently, but now i "feel" yap slow. It show the  
page more slowly that before, and the magnifiying glass tool to delay many  
time. Is there a configuration to do?

Thank in advance.

Prof. Evaristo Arroyo F.
Permalink | Reply | 4 comments |
headers
Bernhard Enders | 3 Apr 02:56
Picon

Re: Yap is slow now

I suspect that this issue is not related to WinEdt at all but to your
default render method in Yap! View | Options... | Display menu. Dvips
is less error prone but it is slower than Pk fonts. Give Pk fonts
method a try, if it works fine for you then you will see a great speed
improvement in the magnifying glass tool and page rendering as a
whole.

Regards,

Bernhard.

On 4/2/07, Evaristo Arroyo <evarroyo <at> yahoo.es> wrote:
> Hola all
>
> I upgrade to winedt 5.5 recently, but now i "feel" yap slow. It show the
> page more slowly that before, and the magnifiying glass tool to delay many
> time. Is there a configuration to do?
>
> Thank in advance.
>
>
>
> Prof. Evaristo Arroyo F.
>
Permalink | Reply | 0 comments |
headers
Evaristo Arroyo | 4 Apr 15:30
Picon
Picon
Favicon

Yap to request new file name


Hi all

Wiht the upgrade to 5.5 I note something in my distribution: If the  
windows (and document in) Yap is open  when I run Texify, it say: !I can´t  
write on file "document´s name". Please type another file name for output:

Any way, i don´t write any name, and Yap modify the file. But the message  
is nasty.

How to avoid this message?

thank a lot in advance.

Atentamente,

Prof. Evaristo Arroyo F.
Permalink | Reply | 2 comments |
headers
Bernhard Enders | 4 Apr 22:13
Picon

Re: Yap to request new file name

Again it's related to MiKTeX (Yap! specifically), not to WinEdt.
Better ask at MiKTeX-Users List :-)

https://lists.sourceforge.net/lists/listinfo/miktex-users

To post a message to all the list members, send email to miktex-users
at lists.sourceforge.net.

Good luck,

Bernhard.

On 4/4/07, Evaristo Arroyo <evarroyo <at> yahoo.es> wrote:
>
> Hi all
>
>
> Wiht the upgrade to 5.5 I note something in my distribution: If the
> windows (and document in) Yap is open  when I run Texify, it say: !I can´t
> write on file "document´s name". Please type another file name for output:
>
> Any way, i don´t write any name, and Yap modify the file. But the message
> is nasty.
>
> How to avoid this message?
>
>
> thank a lot in advance.
>
>
(Continue reading)

Permalink | Reply | 1 comment |
headers
Evaristo Arroyo | 5 Apr 18:55
Picon
Picon
Favicon

Re: Yap to request new file name

En Wed, 04 Apr 2007 16:13:11 -0400, Bernhard Enders <bgeneto <at> gmail.com>  
escribió:

> Again it's related to MiKTeX (Yap! specifically), not to WinEdt.
> Better ask at MiKTeX-Users List :-)
>
> https://lists.sourceforge.net/lists/listinfo/miktex-users
>
> To post a message to all the list members, send email to miktex-users
> at lists.sourceforge.net.
>
> Good luck,
>
> Bernhard.
>
> On 4/4/07, Evaristo Arroyo <evarroyo <at> yahoo.es> wrote:
>>
>> Hi all
>>
>>
>> Wiht the upgrade to 5.5 I note something in my distribution: If the
>> windows (and document in) Yap is open  when I run Texify, it say: !I  
>> can´t
>> write on file "document´s name". Please type another file name for  
>> output:
>>
>> Any way, i don´t write any name, and Yap modify the file. But the  
>> message
>> is nasty.
>>
(Continue reading)

Permalink | Reply | 0 comments |
headers
Derek Collis | 5 Apr 23:33
Picon
Favicon

error is dvips??

I am resending this, as my original email appears not to have gone through.

There appears to be an error in the dvips of WinEdt. I regularly use 
Beamer and pstricks for presentations and handouts, so I latex > dvips > 
pspdf.  When I upgraded to the latest build (20070323), all of a sudden 
the final pdf image occupied the lower left hand corner of the page not 
the whole page, and there was incorrect orientation: portrait instead of 
landscape. However, when I use the command line, I get the correct pdf 
size.

I had attached pdf to show both, but it appears they will be stripped: 
so I hope my explanation is meaningful; a picture would have told the 
whole story.
Permalink | Reply | 3 comments |
headers
WinEdt Team | 6 Apr 03:05

Re: error is dvips??

> I am resending this, as my original email appears not to have
> gone through.
>
>
> There appears to be an error in the dvips of WinEdt. I
> regularly use Beamer and pstricks for presentations and
> handouts, so I latex > dvips > pspdf. When I upgraded to the
> latest build (20070323), all of a sudden the final pdf image
> occupied the lower left hand corner of the page not the whole
> page, and there was incorrect orientation: portrait instead of
> landscape. However, when I use the command line, I get the
> correct pdf size.
>
> I had attached pdf to show both, but it appears they will be
> stripped: so I hope my explanation is meaningful; a picture
> would have told the whole story.

As far as WinEdt is concerned the picture is quite irrelevant:
we'll take your word on it.

However, I would have to know:

1. What exactly do you type in the command prompt (the sequence
of commands -- we may be talking oranges and apples)?

2. Start Options -> Execution Modes and check the definitions
of dvi2ps and ps2pdf (pay attention to the names of executables
and any switches). Are they the same as your command line
sequence?
(Continue reading)

Permalink | Reply | 2 comments |

Gmane