headers
Alastair Johnson | 1 Feb 2010 12:38

Re: Linphone 3.X and pulse audio

On Sunday 24 January 2010, Hetz Ben Hamo wrote:
> I know that ALSA does have mixing capabilities, but so far, it seems
> PulseAudio has good performance even when it comes to real time
> communications.

For the desktop that may be true, but it doesn't do so well on 400MHz armv4t 
while ALSA dmix is fine.
Permalink | Reply | 0 comments |
headers
Alastair Johnson | 1 Feb 2010 13:01

Re: linphonec audio issues

On Wednesday 27 January 2010, anil v wrote:
> Hi All,
> 
>   I have compiled linphone successfully for console only ( no gtk UI ) with
> the below mentioned configuration.
> 
>   *./configure --prefix=/usr --enable-gtk_ui=no --enable-console_ui=yes*
> 
> I have called to SIP address using linphone from console ( call
> mysip <at> ekiga.net ) but when I am speaking from linphone  the destination
> person unable to listen my voice and also from the another end also I am
> unable to hear the voice.
> Here I have mentioned the my sound card details. My Sound card and mic are
> working fine i have tested these things with the skype.
> 
> *[sound]
> remote_ring=/usr/share/sounds/linphone/ringback.wav
> playback_dev_id=ALSA: default device
> ringer_dev_id=ALSA: default device
> capture_dev_id=ALSA: HDA Intel
> local_ring=/usr/share/sounds/linphone/rings/toy.wav
> echocancelation=1*
> 
> Could you please suggest me regarding audio configuration ?

You don't mention anything about what sound devices you have, or what devices 
skype is using. There are some useful commands within linphonec for testing:

play <path_to_wav_file>
record <path_to_wav_file>
(Continue reading)

Permalink | Reply | 0 comments |
headers
anil v | 2 Feb 2010 01:24
Picon

how to configure linphone for video display

Hi All,

    I have installed the Linphone-3.2.1 on my Linux machine and able to call to the mobile numbers. I have tried to call to another SIP address then the audio quality is good but I am unable to see the video of remote person ( My Self video is able to see at my place ). Can any one suggest me what changes are required to see the remote person video for linphone.


Thanks,
Anil.V

_______________________________________________
Linphone-users mailing list
Linphone-users <at> nongnu.org
http://lists.nongnu.org/mailman/listinfo/linphone-users
Permalink | Reply | 2 comments |
headers
Chris Vine | 2 Feb 2010 02:17
Picon
Picon

Re: how to configure linphone for video display

On Mon, 1 Feb 2010 16:24:50 -0800
anil v <anil.vemulapally <at> gmail.com> wrote:
> Hi All,
> 
>     I have installed the Linphone-3.2.1 on my Linux machine and able
> to call to the mobile numbers. I have tried to call to another SIP
> address then the audio quality is good but I am unable to see the
> video of remote person ( My Self video is able to see at my place ).
> Can any one suggest me what changes are required to see the remote
> person video for linphone.

It is probably this bug, which seem to have fallen into a black hole:

https://bugzilla.gnome.org/show_bug.cgi?id=601882
http://bugs.launchpad.net/bugs/203885

Chris
Permalink | Reply | 1 comment |
headers
anil v | 2 Feb 2010 05:09
Picon

how to use linphone from Javscript

Hi All,
  I want to use linphonecsh from Javscript can any one please suggest me how to call/use linphonecsh from Javascript. I have find that linphonecsh can be called from Javascript from this url http://www.linphone.org/index.php/fre/control_a_linphonec_daemon_from_scripts. Can any one give me the Javscript API info.


Thanks,
Anil.V

_______________________________________________
Linphone-users mailing list
Linphone-users <at> nongnu.org
http://lists.nongnu.org/mailman/listinfo/linphone-users
Permalink | Reply | 1 comment |
headers
Chris Vine | 2 Feb 2010 11:28
Picon
Picon

Re: how to configure linphone for video display

On Tue, 2 Feb 2010 01:17:24 +0000
Chris Vine <chris <at> cvine.freeserve.co.uk> wrote:
> 
> On Mon, 1 Feb 2010 16:24:50 -0800
> anil v <anil.vemulapally <at> gmail.com> wrote:
> > Hi All,
> > 
> >     I have installed the Linphone-3.2.1 on my Linux machine and able
> > to call to the mobile numbers. I have tried to call to another SIP
> > address then the audio quality is good but I am unable to see the
> > video of remote person ( My Self video is able to see at my place ).
> > Can any one suggest me what changes are required to see the remote
> > person video for linphone.
> 
> It is probably this bug, which seem to have fallen into a black hole:
> 
> https://bugzilla.gnome.org/show_bug.cgi?id=601882
> http://bugs.launchpad.net/bugs/203885

Sorry, wrong software phone!  That's ekiga.

I have to say that unlike ekiga, I have never had difficulty with
linphone video, so I can't help you.

Chris
Permalink | Reply | 0 comments |
headers
Simon Morlat | 2 Feb 2010 14:51

Re: Linphone crash

Hi Marcin,

I'm quite embarrassed because I'm unable to reproduce any crash under
the conditions you are describing with my Windows XP laptop.
Did you try with 3.2.1 instead of 3.2.0, just in case ?

Simon

Le mercredi 20 janvier 2010 à 09:47 +0100, iBMS - Marcin Wyrwas a
écrit :
> Hi
> 
> It is also possible to replicate this bug using two Linphone clients.
> Just use the config given in previous post (H263-1998 + H264) on first client and on the other client use
similar config but only leave H264 enabled.
> Then try to initiate connection from the one that has H263-1998 + H264 to the one with only H264.
> 
> Best regards,
> Marcin Wyrwas
> 
> 
> Dnia Tue, 19 Jan 2010 17:06:47 +0100, iBMS - Marcin Wyrwas napisał(a):
> 
> > Hi
> > 
> > I have a crash to report.
> > Using Linphone 3.2.0 with msx264-1.3.0 plugin on Windows 7 32-bit (also tested
> > 
> > Windows XP - same results).
> > The crash manifests when attempting to initiate outgoing video call (with
> > attached linphonerc settings file) to 2N Helios IP video door phone
> > 
> > 
> > (http://www.2n.cz/products/door-lift-phones/door-entry-systems/ip-communication.html).
> > 
> > This phone only supports H264 codec.
> > Incoming connections work correctly.
> > 
> > Details:
> > It appears that it's these particular codecs selected (H263-1998 and H264)
> > triggering the crash.
> > Linphone doesn't crash if all possible codecs are enabled.
> > 
> > ----------------------
> > linphonerc:
> > 
> > [sound]
> > echocancelation=1
> > echolimiter=1
> > 
> > [net]
> > download_bw=0
> > upload_bw=0
> > firewall_policy=0
> > mtu=0
> > 
> > [sip]
> > sip_port=5060
> > guess_hostname=0
> > inc_timeout=600
> > use_info=0
> > use_ipv6=0
> > register_only_when_network_is_up=0
> > default_proxy=0
> > 
> > [rtp]
> > audio_rtp_port=7078
> > video_rtp_port=9078
> > audio_jitt_comp=60
> > video_jitt_comp=60
> > nortp_timeout=5
> > 
> > [audio_codec_0]
> > mime=speex
> > rate=16000
> > enabled=0
> > 
> > [audio_codec_1]
> > mime=speex
> > rate=8000
> > enabled=0
> > 
> > [audio_codec_2]
> > mime=PCMU
> > rate=8000
> > enabled=1
> > 
> > [audio_codec_3]
> > mime=PCMA
> > rate=8000
> > enabled=1
> > 
> > [audio_codec_4]
> > mime=GSM
> > rate=8000
> > enabled=0
> > 
> > [video]
> > display=1
> > capture=1
> > show_local=1
> > size=cif
> > 
> > [video_codec_0]
> > mime=H263
> > rate=90000
> > enabled=0
> > recv_fmtp=QCIF=2
> > 
> > [video_codec_1]
> > mime=MP4V-ES
> > rate=90000
> > enabled=0
> > recv_fmtp=profile-level-id=3
> > 
> > [video_codec_2]
> > mime=theora
> > rate=90000
> > enabled=0
> > 
> > [video_codec_3]
> > mime=H263-1998
> > rate=90000
> > enabled=1
> > recv_fmtp=CIF=1;QCIF=1
> > 
> > [video_codec_4]
> > mime=x-snow
> > rate=90000
> > enabled=0
> > 
> > [video_codec_5]
> > mime=H264
> > rate=90000
> > enabled=1
> > 
> > [video_codec_6]
> > mime=H264
> > rate=90000
> > enabled=0
> > recv_fmtp=packetization-mode=1
> > 
> > [GtkUi]
> > uri0=sip:403 <at> 192.168.0.167:55004
> > 
> > [auth_info_0]
> > username=401
> > passwd=ibms
> > 
> > [proxy_0]
> > reg_proxy=sip:192.168.0.167:55004
> > reg_identity=sip:401 <at> 192.168.0.167:55004
> > reg_expires=3600
> > reg_sendregister=1
> > publish=0
> > 
> > 
> > 
> > ----------------------
> > linphone-3.exe caused an Access Violation at location 77339b60 in module
> > msvcrt.dll Writing to location 04564000.
> > 
> > Registers:
> > eax=0453972d ebx=0455f300 ecx=3fffecb8 edx=00000001 esi=0453e44c edi=04564000
> > eip=77339b60 esp=0440fc00 ebp=0440fc08 iopl=0         nv up ei pl nz na po nc
> > cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00010206
> > 
> > Call stack:
> > 77339B60  msvcrt.dll:77339B60  memcpy
> > 6B34189A  libortp-8.dll:6B34189A  msgpullup
> > 65F94783  libmediastreamer-0.dll:65F94783  dec_process_frame  videodec.c:261
> > 
> > 65F94B19  libmediastreamer-0.dll:65F94B19  ms_queue_get  msqueue.h:42
> > 
> > 65F82A4C  libmediastreamer-0.dll:65F82A4C  call_process  msticker.c:179
> > 
> > 65F82AD3  libmediastreamer-0.dll:65F82AD3  run_graph  msticker.c:197
> > 
> > 65F82B10  libmediastreamer-0.dll:65F82B10  run_graphs  msticker.c:210
> > 
> > 65F82C03  libmediastreamer-0.dll:65F82C03  ms_ticker_run  msticker.c:326
> > 
> > 6B341F8C  libortp-8.dll:6B341F8C  WIN_mutex_destroy
> > 77341287  msvcrt.dll:77341287  _itow_s
> > 77341328  msvcrt.dll:77341328  _endthreadex
> > 77481174  kernel32.dll:77481174  BaseThreadInitThunk
> > 77CDB3F5  ntdll.dll:77CDB3F5  RtlInitializeExceptionChain
> > 77CDB3C8  ntdll.dll:77CDB3C8  RtlInitializeExceptionChain
> > ----------------------
> > 
> > Best regards,
> > Marcin Wyrwas
> > 
> > 
> > 
> > 
> > 
> > _______________________________________________
> > Linphone-users mailing list
> > Linphone-users <at> nongnu.org
> > http://lists.nongnu.org/mailman/listinfo/linphone-users
> 
> _______________________________________________
> Linphone-users mailing list
> Linphone-users <at> nongnu.org
> http://lists.nongnu.org/mailman/listinfo/linphone-users
Permalink | Reply | 0 comments |
headers
anil v | 3 Feb 2010 02:46
Picon

msx264 compilation issues

Hi All,

   I am trying to compile the msx264-1.3.0 but i am getting the below mentioned error messages. Please find the error log below. Please suggest me why i am getting the error.

msx264.c: In function ‘enc_preprocess’:
msx264.c:80: error: ‘x264_param_t’ has no member named ‘i_sync_lookahead’
msx264.c:85: error: ‘x264_param_t’ has no member named ‘i_slice_max_size’
msx264.c:94: error: ‘struct <anonymous>’ has no member named ‘i_lookahead’
msx264.c: In function ‘enc_process’:
msx264.c:150: error: ‘x264_picture_t’ has no member named ‘param’
msx264.c: In function ‘dec_process’:
msx264.c:501: error: ‘AVPacket’ undeclared (first use in this function)
msx264.c:501: error: (Each undeclared identifier is reported only once
msx264.c:501: error: for each function it appears in.)
msx264.c:501: error: expected ‘;’ before ‘pkt’
cc1: warnings being treated as errors
msx264.c:503: error: implicit declaration of function ‘av_init_packet’
msx264.c:503: error: ‘pkt’ undeclared (first use in this function)
msx264.c:506: error: implicit declaration of function ‘avcodec_decode_video2’
make[1]: *** [msx264.lo] Error 1

Thanks,
Anil.V

_______________________________________________
Linphone-users mailing list
Linphone-users <at> nongnu.org
http://lists.nongnu.org/mailman/listinfo/linphone-users
Permalink | Reply | 3 comments |
headers
Simon Morlat | 3 Feb 2010 11:07

Re: A http server of oRTP git repository

Hi,

Due to high demand, a http access to git repositories is being setup
soon.

Simon

Le vendredi 29 janvier 2010 à 10:14 +0900, MASAO TAKAHASHI a écrit :
> Dear Mr. Simon.
> 
> I am using  oRTP library with a product of IP announce system.
> Now,oRTP git server has cheaged to git://git.linphone.org/ortp.git.
> I want to get the git clone of oRTP with http protocol.
> Please setup the http git server of oRTP as follows.
> 
> git clone http://git.linphone.org/cgit/ortp.git
> 
> regards
> 
> ---------- 
> MASAO TAKAHASHI <masao-takahashi <at> kanno.co.jp>
> KANNO WORKS CO., LTD. JAPAN
> TEL 093-436-2330
> 
> 
> _______________________________________________
> Linphone-users mailing list
> Linphone-users <at> nongnu.org
> http://lists.nongnu.org/mailman/listinfo/linphone-users
Permalink | Reply | 0 comments |
headers
Simon Morlat | 3 Feb 2010 11:11

Re: Unable to see the remote person's Video

Hi,

The two phones probably don't have common video codecs.
Send a log with linphone-3 --verbose &>log.txt

Simon

Le samedi 30 janvier 2010 à 19:13 -0800, anil v a écrit :
> Hi All,
> 
>     I have installed the Linphone-3.2.1 on my Linux machine and able
> to call to the mobile numbers. I have tried to call to another PC SIP
> address then the audio quality is good but I am unable to see the
> video of remote person ( My Self video is able to see at my place ).
> Can any one suggest me what changes are required to see the remote
> person video.
> 
> 
> Thanks,
> Anil.V
> _______________________________________________
> Linphone-users mailing list
> Linphone-users <at> nongnu.org
> http://lists.nongnu.org/mailman/listinfo/linphone-users
Permalink | Reply | 0 comments |

Gmane