Re: Linphone 1.0pre4 crashes on start

Hi Samuel,

thank you, but it doesnt solve the problem:

/---
prometoys <at> mir:~$ linphone

(linphone:31783): GnomeUI-WARNING **: While connecting to session manager:
Authentication Rejected, reason : None of the authentication protocols 
specified are supported and host-based authentication failed.
MediaStreamer-Message: Found /dev/dsp.
MediaStreamer-Message: Found ALSA device: Intel 82801CA-ICH3
MediaStreamer-Message: alsa_set_params:  blocksize=512.
\---

if you need the complete bug-buddy output, i can sent it to you.

i use debian sid, have an i810 audo device and test linphone with and 
without esd.

bye,

keywan

Samuel Mimram schrieb:
> Hello,
> 
> I have experienced a similar bug recently that I have been able to track 
> down. I have patched a bit linphone and uploaded the patched packages on 
> my website. Could you try to download and reinstall linphone (in 

no srv records being looked up in pre4 ?

Hi,

While debugging some problems I have with linphone 1.0.0-pre4, it
appeared to me that when I called sip:user <at> domain without a proxy,
linphone did not lookup the srv records in DNS.

What I would expect, and what linphone 0.12.2 is doing, is that the DNS
would be queried for the _sip._udp.domain srv record. pre4, however,
only looked up domain's a record, and tried to connect to the resulting
IP number. Which differs from the name in the srv record.

I don't know whether this is desired behavior for linphone 1.0 or not,
by the way.

Thank you,

Remco

Re: no srv records being looked up in pre4 ?

Hi,

FWIW we recently had a bug in Debian about this, see:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=275966
The linphone's developer told me that it should be fixed in a (more or 
less) near future.

Regards,

Samuel.

Remco van de Meent wrote:
> Hi,
> 
> While debugging some problems I have with linphone 1.0.0-pre4, it
> appeared to me that when I called sip:user <at> domain without a proxy,
> linphone did not lookup the srv records in DNS.
> 
> What I would expect, and what linphone 0.12.2 is doing, is that the DNS
> would be queried for the _sip._udp.domain srv record. pre4, however,
> only looked up domain's a record, and tried to connect to the resulting
> IP number. Which differs from the name in the srv record.
> 
> I don't know whether this is desired behavior for linphone 1.0 or not,
> by the way.
> 
> 
> Thank you,
> 
> Remco

linphone 1.0.0 Debian packet can not registration with asterisk server

Hello.

Can you help me? With linphone 0.12 was all ok.
In the attachment is the logfile from linphone.
Thanks for the help.

-- 
 Lothar Schweikle-Droll      mailto:Lothar.Schweikle-Droll <at> logout.de

Wie man sein Kind nicht nennen sollte: 
  Dina Stee 

--

-- 
Bitte senden Sie mir keine Word-, Excel- oder PowerPoint-Anhänge.
Siehe http://www.fsf.org/philosophy/no-word-attachments.de.html

| INFO1 | <eXosip.c: 273> eXosip: Reseting timer to 15s before waking up!
| INFO1 | <eXosip.c: 273> eXosip: Reseting timer to 15s before waking up!
| INFO1 | <eXosip.c: 273> eXosip: Reseting timer to 15s before waking up!
| INFO2 | <osip_transaction.c: 129> allocating transaction ressource 1 1506538998
| INFO2 | <nict.c: 36> allocating NICT context
| INFO2 | <eXutils.c: 508> Not an IPv4 or IPv6 address: pbx
| INFO2 | <eXutils.c: 538> DNS resolution with pbx:5060
| INFO1 | <jcallback.c: 147> Message sent: 
REGISTER sip:pbx SIP/2.0

Via: SIP/2.0/UDP 217.197.84.178:5060;branch=z9hG4bK1557996354

From: <sip:200 <at> pbx>;tag=597050837

Re: [Linphone-developers] Linphone 1.0pre4 crashes on start

Hello,

This bug should be fixed in pre5 release.
As a workaround, I think removing the old config file ~/.gnome2/linphone or 
~/.linphonec should avoid this problem.
Thanks for reporting it.

Simon

Le Lundi 25 Octobre 2004 23:50, Keywan Najafi Tonekaboni a écrit :
> Hi,
>
> i want to test the debian packages of linphone, but it crashes. I tried
> with and without esd and all possible settings of gstreamer.
>
> Bye Keywan

Re: newbie

Hello,

What version are you using ?
Simon

Le Mercredi 27 Octobre 2004 14:58, Georg Ritter a écrit :
> Hello,
>
> just downloaded and compiled .
>
> When trying to use it with sipgate.at, it for some reason fails.
>
> The problem is a
>
> | INFO1 | <ict_callbacks.c: 261> User need to authenticate to INVITE!
> |
> | INFO1 | <authentication.c: 351> Unable to get a password: no registration
> | context.
>
> probably. But I entered my password and checked the tickbox in the prefs.
>
> For the NAT traverse I was not sure if I must put the IP of FW
> or the IP of the originating PC behind the NAT fw. So tried both,
> neither did work.
>
> Here is the detailed log
> There are some parse errors ( the ">>" "<<" I inserted into
> the debug output to see where the string ends and starts is)
> Though it seem to receive an emtpy udp message.
>

Re: Debian 1.0 Version and registration on a asterisk system

Hello,

There is no correct config file. If you are using the gnome version, use the 
configuration box to setup your proxy, if you are using the console version, 
then type 'proxy add' to add a new proxy configuration. (availlable only for 
version>=1.0.0pre4 ).
Simon

Le Vendredi 29 Octobre 2004 18:31, Lothar Schweikle-Droll a écrit :
> Hello.
>
> I'm use the new debian packet for the linphone 1.0.x.
> Can you me send the correct "~/gnome2/linphone " config for a
> registration with my asterisk server?
>
> With the 0.12.x was all "ok"
>
> My config:
>
> [net]
> con_type=3
> use_nat=0
>
> [sip]
> sip_port=5060
> guess_hostname=0
> contact=sip:200 <at> 217.197.84.179
> use_info=0
>
> [rtp]

DI-604 firewall router

Hi!

I just installed linphone yesterday, as I read somewhere that it might
work with aMSN over sip, which microsoft eventually uses for their
Messenger.

However, I am using an external router, DI-604, with NAT firewall.

My question is:

Is it at all possible to use linphone with such a configuration?

I have forwarded UDP ports 5060 and 7080 to my internal ip address,
which I have received from the router (192.168.0.149).

I have tried all kind of configuration "mixes" in the linphone
Preferences. But I get no response when calling - no signal.

The internal siphomatic test went ok, though.

If somebody of you have a similar setup, I would be very glad to learn
how to deal with this firewall issue.

BTW, I use Gentoo stable and have linphone-0.10.2 (+alsa -doc +gnome
+gtk +gtk2 +nls +xv) and libosip-0.9.7 installed.

Regards,

linfan

Adding Proxy Require to SIP Registration

Hello,

I'm trying to interface with some nortel sip gateways from behind a 
firewall. These gateways support the "Proxy-Require" attribute when 
registering with the SIP gateway. Here's an example of a nortel client 
connecting with the proxy require. To my knowledge it only needs to be 
included onces at registration. The gateway handles the rest. libosip 
0.9.7 supports this setting from what I can tell, but I'm looking to add 
it to the linphone configuration file if I can. What would be really 
easy is if the linphone configuration files supported adding arbitrary 
attributes to certain messages. I can only see this being useful for 
registration, but perhaps there are other particular uses which it could 
apply to as well. Anyways, here's the dump of an example session for 
those who need it.

REGISTER sip:betalab:5060 SIP/2.0
t: <sip:anon <at> betalab>
f: <sip:anon <at> betalab>;tag=2144400983
i: 71d8c8f3_ff22df76e6 <at> *.*.*.*
CSeq: 1 REGISTER
v: SIP/2.0/UDP *.*.*.*:5060
x-nt-GUID: fb882ed0ad4be2ccafa4d0668266e0874947f9
x-nt-location: 84406
Accept-Encoding: nt-im-2.0
m: <sip:anon <at> betalab:5060;maddr=*.*.*.*≥;description="Login";expires=86200
Proxy-Require: com.nortelnetworks.firewall
User-Agent: Nortel PCC 3.0.338
l: 0

James

Newbie Questions (Vonage)

I am trying to get linphone to connect to vonage over sip and cant
seemed to get it to register. 

I am behind a nat/firewall.

The outbound proxy for vonage is 216.115.25.198:5061

output from linphone:

| INFO1 | <udp.c: 295> Sending message:
REGISTER sip:sphone.vopr.vonage.net SIP/2.0
Via: SIP/2.0/UDP 192.168.1.164:5060;branch=z9hG4bK676728882
From: <sip:13602434025 <at> sphone.vopr.vonage.net>;tag=1479401605
To: <sip:13602434025 <at> sphone.vopr.vonage.net>;tag=1479401605
Call-ID: 4082570752 <at> 192.168.1.164
CSeq: 0 REGISTER
Contact: <sip:13602434025 <at> 192.168.1.164>
max-forwards: 10
expires: 900
user-agent: oSIP/Linphone-0.12.1
Content-Length: 0

| INFO1 | <nict_callbacks.c: 30> Transaction 1 killed.

| INFO1 | <osipdialog.c: 1918> Dialog is removed. It remains 0 dialog(s)
in the ua list.

Any ideas on what I have set wrong?

Thanks