headers
Steffen Barszus | 1 Jan 2000 01:02
Picon
Picon

Re: Re: DVD constant a/v mismatch (was DXR3 audio/video sync issues)

[Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
Am Montag, 22. Juli 2002 17:42 schrieb Dirk Meyer:
> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
>
> Arpi wrote:
> > [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> > Hi,
> >
> >> > > http://www.maven.de/code/index.html#vstrip
> >> >
> >> > Would be fine if mplayer can use some of that code. I put  a jpg
> >> > (vStrip-Screenshot-recognized-delay.jpg) on incoming there
> >>
> >> interesting. could you show the delays for teh first (video) streams?
> >
> > ok i did it, for the dvd with ~300ms delay:
> >
> > root <at> arpi:/usr/src/vStrip/vstrip# ./vstrip /9/VOB/stream.dump
> > vStrip - version 0.8f, by [maven] (maven <at> maven.de).
> >
> > Scanning for stream id's, press control-c to quit...
> > Found 0xE0 = Video 0 [PTS 0:00:00.367  <at> LBA 0]
> >   Width = 720
> >   Height = 576
> >   Aspect-ratio = [2] 4:3 display
> >   Frame-rate = [3] 25 fps
> > Found 0xBE = Padding [ <at> LBA 116]
> > Found 0xBD = Private 1, sub 0x80 [PTS 0:00:00.287  <at> LBA 117]
> > Found 0xBD = Private 1, sub 0x20 [PTS 0:00:01.287  <at> LBA 310]
> >
(Continue reading)

Permalink | Reply | 0 comments |
headers
Carl Karsten | 5 Jan 2000 01:12

rip dvd to edit with mac's Final Cut Express

Trying to re-master a DVD using Final Cut Express on a Mac - cut out 
some scenes and add chapter marks.  I couldn't figure out how to rip a 
dvd on the mac, so I am using mPlayer on a windows box.  (I normally run 
mP on Linux, but I am at my mom's on vacation.)

Below is what "works" but has some error messages that make me think it 
can be done better.  Anyone have any suggestions?

Carl K

F:\>mEncoder -dvd-device e: dvd://1 -ovc lavc -oac pcm -ss 00:04:00 00 
-endpos 00:01:00

MEncoder dev-CVS-041023-09:31-3.2.3 (C) 2000-2004 MPlayer Team

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, 
Stepping: 10
)
Detected cache-line size is 32 bytes
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with 
--disable-runtime-cpudetection.
Reading C:/Program Files/mplayer/mplayer/codecs.conf: Can't open 
'C:/Program Fil
es/mplayer/mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open 
'/usr/local/etc/mplayer/c
odecs.conf': No such file or directory
Using built-in default codecs.conf.
(Continue reading)

Permalink | Reply | 0 comments |
headers
Carl Karsten | 5 Jan 2000 14:34

Re: ER - recognize standard playlist

Reimar Döffinger wrote:
> Hi,
> 
>>Apparently there is some work to make a standardized "play list" that 
>>various readers/writers can use to help organize files.  This seems like 
>>a good idea: give the viewer (mplayer) the path to the root of a fs (CD, 
>>camera memory chip, etc.) and it will find the play list and play the 
>>specified files.  Kinda like a DVD menu, only generic enough to handle 
>>more than just movies on DVD's.
>>
>>The best link I have seen is 
>>http://www.softarch.com/us/press/ostampv.htm  which links to a spec 
>>http://www.osta.org/specs/pdf/MultiAudio110.pdf
> 
> 
> I didn't read it in detail, but it sounds like pure overkill to me what
> they are doing, and doesn't seem to support that many features...
> Anyway, it would be a lot of work to implement, I wouldn't assume anyone
> will do that anytime soon (is at all)...

Thats kinda what I was thinking too.  I was hoping someone would point 
to something similar but more likely to be implemented.
> 
> 
>>Anyone know of anything else like this?  I figure if such a thing is 
>>coming, I might as well put the playlist on my CD's now, cuz it is hard 
>>to later ;)
> 
> 
> Yes, a file containing a list with all the filenames, one per line. I
(Continue reading)

Permalink | Reply | 2 comments |

Gmane