Re: sip reqistration on yate windows dont work

ohh, Thanks Tengo and mc_creat , problem resolved with .. update...
I not remember what version I have early, but I have find, what no module 
accfile.yate have been installed. After update I have find accfile.yate and 
now all work.

Regards,
Serge.

----- Original Message ----- 
From: "Serge" <serge@...>
To: <yate@...>
Sent: Monday, February 28, 2011 4:19 PM
Subject: [yate] sip reqistration on yate windows dont work

> dear all,
>
> I have problem register windows yate as sip client .
>
> I nothing see about try to registry on proxy server in debag, if I try to 
> call - see output:
> <INFO> Could not classify call from '00243096', wasted 0 usec
> <INFO> Routing call to '039318749123456789' in context 'default' via 
> 'sip/sip:0049123456789' in 1000 usec
> <sip:NOTE> Formats for 'audio' changed to 'g729' [004A9AF0]
> <sip/1:MILD> Call rejected error='offline' reason='Could not connect to 
> target' [004A99D0]
> <sip/1:ALL> YateSIPConnection::hangup() state=0 trans=004A41E8 
> error='noroute' code=404 reason='Could not connect to tar
> get' [004A99D0]
>

Video over SIP in Yate

Hi
I'm trying to make video call in SIP via yate
in both sides are clients with the same codecs (h.263)
audio works fine, but doesn't want (
May it be some special params in routes?

g729.yate module

Re: Video over SIP in Yate

Re: Video over SIP in Yate

Hello.

As I know, you must allow video codecs in Yate config.
Try  add to ysipchan.conf into section [codecs]
h263=yes

On Tue, Mar 1, 2011 at 3:24 PM, Andrey S. Zakharajshchev
<blackhawkh@...> wrote:
> Hi
> I'm trying to make video call in SIP via yate
> in both sides are clients with the same codecs (h.263)
> audio works fine, but doesn't want (
> May it be some special params in routes?
>

Re: Video over SIP in Yate

Re: Video over SIP in Yate

According this line
m_codecs.getBoolValue(payload,defcodecs && DataTranslator::canConvert(payload))

Yate add codec in default=true only when engine cat convert it.
But enabling each codecs must work.

On Wed, Mar 2, 2011 at 1:37 PM, Black Hawk <blackhawkh@...> wrote:
>
>
> 2011/3/2 mc_creat <mc.creat@...>
>>
>> Hello.
>>
>> As I know, you must allow video codecs in Yate config.
>> Try  add to ysipchan.conf into section [codecs]
>> h263=yes
>
> in section [codecs] i have default=true, so is enable any codec... or not?
>>
>>
>> On Tue, Mar 1, 2011 at 3:24 PM, Andrey S. Zakharajshchev
>> <blackhawkh@...> wrote:
>> > Hi
>> > I'm trying to make video call in SIP via yate
>> > in both sides are clients with the same codecs (h.263)
>> > audio works fine, but doesn't want (
>> > May it be some special params in routes?
>> >
>
>

Re: Video over SIP in Yate

controling Cisco as5400 through Yate

hello,
i'm trying  to control a as5400XM through yate, using ciscoCM
code:
[sample_session]
local_host=10.100.0.3
local_port=4001
remote_host=10.100.0.2
remote_port=4000

[link1]
session=sample_session
channel=0
autostart=yes

[link2]
session=sample_session
channel=1
autostart=yes

this is in ciscocm.conf
but in telnet to 10.100.0.3 (yate host), if i run: status sig link
i get no link
count to 0
any idea?
thank you.

--

-- 
Meftah Tayeb
inum: +883510001288000
phone: +13477595883

Re: controling Cisco as5400 through Yate

Hi!

Do you have linksets in ysigchan.conf referencing the defined links? Links are 
created on demand from the MTP3 sections.

In the log file do you see any warnings related to the links?

Paul

On Saturday 05 March 2011 02:28:10 pm Meftah Tayeb wrote:
> hello,
> i'm trying  to control a as5400XM through yate, using ciscoCM
> code:
> [sample_session]
> local_host=10.100.0.3
> local_port=4001
> remote_host=10.100.0.2
> remote_port=4000
>
> [link1]
> session=sample_session
> channel=0
> autostart=yes
>
> [link2]
> session=sample_session
> channel=1
> autostart=yes
>
> this is in ciscocm.conf
> but in telnet to 10.100.0.3 (yate host), if i run: status sig link
> i get no link
> count to 0
> any idea?
> thank you.